输入输出设计

输入输出设计输入输出设计
  1. 基于此目的,介绍了环境规划GIS的开发思路,主要内容包括:系统分析、功能设计、系统结构设计、系统模式及输入输出设计等。

    For the purpose of that , it gives information on ways of development of GIS applied in environmental planning , which includes system analysis , function design , system construction design , system model and input_output design .

  2. 为了解决建模中样本数据选择问题,在分析加油站每日成品油销售记录和相关辅助信息的基础上,针对BP网络模型提出了几种样本选择方式和网络输入输出设计模式。

    For solving sample selection during the modeling , several methods of selecting samples and designing patterns of network in-out on aiming at BP model are presented on the basis of analyzing daily sale records and specified interrelated assistant information in a gas station .

  3. 第三,对系统进行了数据库设计、代码设计和输入输出设计;

    Thirdly , this paper design the database , program and the put in / out of this system ;

  4. 然后进行润通动力车间生产物流管理系统的设计,其中包括系统总体设计、数据库设计以及界面输入输出设计。

    Then design the whole management system , which includes the design of system architecture , data structure and UI interface .

  5. 介绍了基于ARC/INFO的土地信息系统的设计方法和思路,包括系统总体设计,数据库设计,模块设计,输入输出设计,系统评价与维护等。

    The design processes of LIS based on ARC / INFO are presented , which include the design of system collectivity , database , modules , input & output and evaluation and maintenance of LIS .

  6. 大功率FET的输入输出电路设计

    Design of Input / Output Circuits of High Power FET

  7. 针对郑州广电管线管理的需求,对有线电视管线GIS系统进行了总体设计、功能设计、数据库设计、输入与输出设计、系统界面设计。

    In the light of the requirement of ZhengZhou broadcasting & television tube line management , the author provides general design , function design , database design , I / O design , system interface design of the CATV Tube Line GIS .

  8. 本课题使用EDMA(EnhanceDMA)实现视频数据的输入输出,设计了双缓冲视频数据输入输出方案;

    EDMA ( Enhance DMA ) is used to realize input and output video data , and a scheme of two buffers is designed for input and output of video data in this paper .

  9. 采用PLD器件设计CRC-32编码器,进行了时序设计、编码器设计、输入输出寄存器设计,从而实现了CRC-32编码。

    CRC-32 coder was designed with PLD , carried through designs of timing order , coder , and input and output registers was designed , thereby , CRC-32 coding was realized .

  10. DJS200/10型计算机输入输出通道设计

    The design of I / o channel of djs200 / 10 computer

  11. 输入输出界面设计,并包括部分主要功能部件的设计和实现。

    I / O Interface Design : and also to include the design and implementation of part of the main function components .

  12. 第二,完成了了芯片的逻辑设计,其中控制器、复位逻辑设计和输入输出接口设计和设计是本文研究的重点。

    Logic design of the chip is accomplished . Reset logic design , input-output interface design and controller design is the focus of this dissertation . 3 .

  13. 首先,通过在系统的输入输出端设计通信序列,分时占用网络,以降低带宽约束对系统的影响,进而建立了考虑通信序列后的系统模型。

    The communication sequences which make the input and output available in a time-sharing mode is proposed to reduce the effect of bandwidth constraint , and therefore the system model is presented .

  14. 该系统的设计主要包括时钟电路设计、外围存储器电路设计、千兆以太网接口设计、图像采集输入输出接口设计等等。

    The design of the system mainly includes the clock circuit design , peripheral memory circuit design , gigabit Ethernet interface design , image sampling input / output interface design , and so on .

  15. 然后,基于电特性的输入输出关系设计了一个模糊控制器,且利用模糊控制器的输入输出样本训练神经网络。

    Then a fuzzy controller is designed based on relationship of input vs. output of electric characteristics . The neural network is trained from the samples of input and output of the fuzzy controller .

  16. 嵌入式控制系统的硬件系统设计包括主控芯片选择、信号输入输出模块设计、传感器选型及电路设计,软件系统设计包括操作系统选择、驱动程序和应用程序开发、控制算法编写等。

    Hardware system design of the embedded control system includes master chip selecting , signal input and output module design , sensor selection and circuit design . Software system design includes operating system selection , drive program and application development , and control algorithms compiled .

  17. 本文从以下两个方面介绍了单片机应用系统提高系统可靠性的一些设计方法:硬件的电源、线路板、输入输出接口设计及选用元器件;软件的数字滤波、容错、陷阱及看门狗技术。

    This paper introduces some methods which improve systematic reliability from two respects : the design of power , circuit board , input-output interface and screen method of components in hardware , and the technology of digital filtration , endure fault , trap and watch-dog in software .

  18. IC中的输入/输出电路设计

    Design of I / O Circuits in IC

  19. 在ISO的术语,可追溯表明,设计的输入链接到输出设计,并得到了验证。

    In ISO terminology , traceability shows that design input is linked to design output , and has been verified .

  20. 介绍了空调冷水站自动控制的特点及流程,举例说明了应用可编程序控制器(PLC)控制的硬件输入输出和软件设计。

    Describes the characteristics and flow chart of control in a chilled water station for air conditioning and demonstrates hardware and software designs when programmable logic controllers are used .

  21. 本文根据数字量输入输出板的设计目标,对该板的原理性设计和输入输出的实现进行了分析,在原理图和PCB板的设计过程中,又充分考虑了系统的抗干扰能力;

    According to the desired aim of the digital I / O board , we analyzed the design principle and realization of I / O.

  22. 简要介绍了模糊控制中常用的二输入单输出的设计思想及方法,并采用了模糊控制的方法来改进实际生产中PID控制的一些不足。

    This paper introduces the idea and method of two-input and one-output control system , and adopts a kind of fuzzy control method to improve the PID control in production .

  23. 本文分析了PLC控制系统中干扰信号的主要来源,从PLC的电源、系统输入、输出电路设计、接地、配线等诸方面,介绍有效的抗干扰措施。

    The paper analyzes the main sources of interference signals in PLC control system , and presents effective anti-interference measures from the aspects of PLC power , I / O circuit design , earthing and wiring .

  24. 讨论了C8051F020单片机的特点,并详细讨论了模拟量输入输出电路的设计和以太网接口电路的设计。

    The features of C8051F020 MCU , analog input and output circuit design and Ethernet interface circuit design were discussed .

  25. 在设计线性时不变自适应观测器时,首先利用系统的输入、输出数据设计一个Hopfield网络参数估计器,进一步设计状态观测器,证明了参数估计器和状态观测器的指数收敛性;

    For the linear systems with unknown parameters , we identify the parameters using Hopfield network , then design the observers using the identified parameters , the exponential convergence of adaptive observer is also proved .

  26. 本文在该电路拓扑的基础上,设计了该变换器的主电路及其控制系统,主电路采用移相控制ZVZCS全桥拓扑,包括主变压器设计、输入输出整流滤波器设计、全桥谐振变换器的设计;

    FB ZVZCS PWM circuit is used in the main circuit , including the design of main transformer , rectifier , filter , and full bridge resonant converter .

  27. 对PLC控制系统的一些干扰因素进行了分析,从PLC的安装,电源,系统输入、输出电路设计等方面,提出了系统抗干扰的具体方法和措施。

    This article analyses the some jamming factors in the control system of programmable logic controller ( PLC ), and brings forward the concrete methods and steps of systematic anti-jamming from the sides of the installation , the electric source , the systematic input , output electrocircuit design , etc.

  28. 结合实例介绍了使用MATLAB软件中的控制系统工具箱所提供的线性时不变系统观测器(LTIViewer)和单输入单输出系统设计工具(SISODesignTool)对控制系统进行分析和设计的有关功能和方法。

    The relevant functions and methods that the control system is analysed and designed by using linear time invariant ( LTI ) viewer and single input single output system ( SISO ) design tool of control system toolbox of MATLAB software are introduced in the light of instance .

  29. 系统的硬件设计主要包括:存储器模块的设计、JTAG接口的设计、时钟系统的设计、电源模块的设计、复位系统的设计、视频输入输出模块的设计、报警电路的设计等。

    System hardware design is as follows : the design of memory module , JTAG interface design , the clock system design , power module design , reset circuit design , video input and output module design , alarm circuit design and so on .

  30. 利用输入输出测量值设计控制系统的新方法

    New method of MRAC system design with input and output data