钢水
- molten steel;liquid steel
-
[molten steel] 熔融状态的钢
-
Al-Mg合金在钢水中脱氧脱硫的行为分析及应用
Behavior analysis and application of aluminium-magnesium alloy in deoxidation and desulphurization in molten steel
-
铝钙渣系是近年发展起来的新型合成精炼渣,主要用于LF炉钢水脱硫、去除夹杂物,以达到净化钢液的目的。
In recent years , 7Al2O3 · 12 CaO refining slag is being used to purify molten steel , desulfurize and remove inclusions in the processing of LF .
-
对结晶器钢水液位控制采用了基于专家知识的智能PID模糊复合控制策略。
Comparison and research on strategy of mold level control are made .
-
PLC在鞍钢第三炼钢厂钢水试料气体送样系统的应用
PLC Application in Liquid Steel Test Gas Sample Transfer System in AISC No.3 Steelmaking Plant
-
Cu、Ni对钢水质量和钢材性能的影响
Effect of Cu , Ni on quality of liquid steel and mechanical properties of steel products
-
RH真空处理生产超低碳钢时钢水脱碳的数学模型
Mathematical model of decarburization of ultra-low carbon steel during RH treatment
-
重点研究了采用双级模糊控制器对结晶器钢水液位进行模糊控制的策略,并用C语言编程实现了带有非线性补偿的双级模糊控制算法。
The emphasis of this paper is to research the fuzzy control mode with two level fuzzy controller , and to compensate the clearer with arithmetic .
-
应用多元回归技术预测CAS终点钢水温度
Prediction of End Temperature on CAS by Multi-element Regression Method
-
LF精炼过程的钢水温度控制
Control of Molten Steel Temperature during Ladle Furnace Refining
-
RH钢水真空处理技术现状
Technical status of RH degassing for molten steel treatment
-
马钢CSP流程对成品钢水氮的控制
Control of Nitrogen Content in Liquid Steel in CSP Process
-
HMM在钢水连铸下渣振动检测方法中的应用
Application of HMM theory in vibration detection method of slag in continuous casting
-
抑制CSP热轧板卷产生边部裂纹的主要措施是:控制好合适的钢水成分;
The main measures of control are : reasonable control of steel composition ;
-
通过LF炉白渣精炼,实现钢水脱硫、脱氧;
The desulfurization and deoxidation can be realized by white slag refining with LF furnace .
-
RH钢水二次精炼法的发展
Development of rh-secondary refining for molten steel
-
LF钢水炉外精炼工艺研究
Research on ladle furnace refining technology
-
RH真空处理过程中钢水的清洁度
Steel cleanliness during RH degassing process
-
VD炉钢水温度预报模型
Prediction Model of Molten Steel Temperature for VD Route
-
金属铝粉的加入减少了SiC的氧化,并且可能对钢水产生脱氧作用,导致SiC向钢中增碳。
Al powder decreases the SiC oxidation and likely accelerates deoxidization in the steel , resulting in carburization of SiC to the steel .
-
钢水脱氧后夹杂物大多转化为复合夹杂物,其中Al2O3夹杂物主要转变为MgO。
Especially the inclusion of Al2O3 , FeS and MnS are respectively changed into compound inclusion such as MgO .
-
建立GA-PB网络模型过程中,深入考察了影响LF钢水温度的因素。
The factors of influencing molten steel temperature of LF were deeply investigated during building up the model of GA-BP network .
-
MgO-C耐火材料对钢水的增碳作用及机理的研究进展
Progress in Research on Reaction between MgO-C Refractory and Liquid Steel
-
AOD炉防自动倾翻和失电安全泻钢水工作装置的设计和改造
Design and Reform of the Tilting Device of AOD Furnace for Safety Discharge and Unexpected Tilting
-
本文利用3种BP网络优化算法,通过调整网络参数对转炉终点钢水磷含量进行训练和预测。
This paper trains and predicts the data of the end phosphorus content in BOF process by using 3 kinds of BF network optimized algorithms and regulating the parameters of the network .
-
通过对唐钢第一炼钢厂转炉、LF和连铸生产过程的研究,讨论了各工序钢水中氮的变化及其影响因素。
The change of nitrogen content and its affecting factors in process of converter production , LF and continuous casting are studied and discussed .
-
针对真空感应炉生产过程中温度测量成本较高及精度较差等不足,建立了基于RBF神经网络的真空感应炉终点钢水温度预报模型。
A prediction model of molten steel temperature based on RBF neural network was developed to reduce cost and improve temperature control accuracy for vacuum induction melting .
-
通过LF精炼脱硫工业实验,确定了在不同条件下熔渣和钢水中的实际硫分配比。
Through industrial tests for the ladle furnace ( LF ) refining process , the practical slag-metal sulfur partition has been given under different conditions .
-
在150t转炉上用质谱仪进行钢水连续定碳
Continuous Determination of Bath Carbon on a 150 t B OF by Mass Spectrometer
-
本文介绍了本溪板材股份有限公司150t转炉引进的国内第一套转炉炉气分析系统,研究了利用炉气分析进行钢水连续定温的预报模型。
The first imported off-gas analysis system on a 150t BOF at Benxi Plates Co.
-
结合邯钢CSP生产实践,研究了结晶器形状、钢水化学成分和结晶器热流控制对薄板坯表面纵裂的影响及表面纵裂的形成机理。
The influencing factors of longitudinal surface cracking of CSP Slab such as funnel mold shape , chemical composition and mold heat flux were studied .