镍铁

强磁场对电沉积镍铁合金膜显微组织的影响

Effect of high static magnetic field on microstructure of electrodeposited NiFe film

非晶镍铁磁敏薄膜的巨磁阻抗效应

Giant Magneto-impedance Effect in Amorphous NiFe Magnetic Sensitive Films

电位连续测定（STEP）法及其在多层镍与多层镍铁合金镀层上的应用

Application of step test in multi-layer Ni and Ni - fe electrodeposits

还原大红R的电化学还原及其染色工艺的探讨红土矿还原生产镍铁熔炼条件的研究

Electrochemical Reduction and Dyeing Technology of Vat Scarlet R RESEARCH ON THE EXPERIMENTAL CONDITIONS OF SMELTING PROCESS FROM LATERITES TO FERRONICKEL

采用XRD、FTIR、SEM等分析手段表征了镍铁复合金属氧化物及其前驱体的结构和形貌。

XRD , FTIR and SEM were used to characterize the structure and morphology of the samples .

MnO2对镍铁尖晶石惰性阳极材料性能的影响

Effect of MnO_2 on properties of inert anode of NiFe_2O_4 spinel

MnO2添加剂对镍铁尖晶石基惰性阳极耐腐蚀性的影响

Effect of MnO_2 Addition on Corrosion Resistance of Nickel-Ferric Spinel Based Inert Anode

与聚苯胺相比，镍铁氧体/聚苯胺复合材料的介电损耗角正切tanδε值与磁损耗角正切tanδm值都增大。

Dielectric loss tangent and magnetic loss tangent of the nickel ferrite / polyaniline composites are higher than those of the polyaniline .

X射线晶体结构分析与TGDTA分析表明，镍铁与镁铁水滑石晶体两者结构相似，但热稳定性存在一定差异。

Their heat stability difference were compared by X-ray crystal structural analysis and TG-DTA analysis . The results showed a similar crystal structure and different heat stability .

预烧温度对掺杂TiO2、MnO2的镍铁尖晶石惰性阳极微观形貌和性能的影响

The Effects of Presintering Temperature on Microstructure and Properties of Inert Anodes of NiFe_2O_4 Spinel with Additives TiO_2 , MnO_2

YD-1添加剂对镍铁合金镀层微观结构的影响

Effects of Additive YD-1 on the Microstructure of Ni-Fe Alloy Coating

Jx-1型镍铁电镀光亮剂的研制及性能测试

Preparation and Evaluation of Jx-1 Nickel Iron Brightening Agent Tor Electroplating

斯特拉塔公司（xstrata）昨日表示，由于能源成本飙升和镍价下跌，该公司已经关闭多米尼加共和国境内的镍铁采矿和加工作业，为期至少4个月。

Xstrata said yesterday it had shut down a ferronickel mining and processing operation in the Dominican Republic for at least four months due to soaring energy costs and lower nickel prices .

以NiO，Fe2O3，Ag粉和微量V2O5为原料，用粉末冶金法制备掺杂V2O5的镍铁尖晶石金属陶瓷惰性阳极，研究V2O5对惰性阳极材料微观形貌和电导率的影响。

Inert anodes of nickel ferrite-based cermets were prepared by the powder metallurgy method using NiO , Fe_2O_3 , Ag , and a little V_2O_5 as raw materials . The effect of V_2O_5 on microstructure and conductivity of the inert anodes was investigated .

为了提高镍铁尖晶石的性能，以NiO，Fe2O3和微量V2O5为原料，采用粉末冶金法制备了含有过量15%（以质量计，下同）NiO，掺杂V2O5的镍铁尖晶石惰性阳极。

In order to enhance the performance of nickel ferrite inert anodes , a nickel ferrite inert anode with 15 % ( in mass , the same below ) excess NiO was prepared by the powder metallurgy method using NiO , Fe_2O_3 and a little V_2O_5 as raw materials .

介绍了如何运用CS-200型红外碳硫分析仪测定镍铁中的碳硫，重点对新坩埚和再生坩埚以及助熔剂的选择、仪器的工作条件进行较详细的介绍，操作简单、可靠。

It is introduced how to determine carbon and sulphur in ferronickel with CS-200 infrared C-S analyzer , particularly in detail that how to select new or regenerated crucible and flux , the operation conditions of the instrument .

镍铁氢化酶活性中心的结构、催化机理及化学模拟

Active Site Structure , Catalytic Mechanism and Chemical Mimic of hydrogenase

氧化还原法制备镍铁合金粉的研究

Preparation of Ferronickel Powders from the Nickel Concentrate by Oxidation-Reduction Method

过硫酸铵&丁二酮肟示差分光光度法测定镍铁中的镍

Determination of Ni in Nickelferrite by Ammonium Persulfate-dimethylglyoxime Differential spectrophotometry Method

电刷镀纳米晶镍铁合金镀层腐蚀特性的研究

Corrosion Characteristic of Nanocrystalline Ni-Fe Alloy Coating Synthesized by Brush Plating

镍铁尖晶石基惰性阳极材料腐蚀热力学分析

The Thermodynamics Analysis of Inert Anode Material Based on Nickel-Ferric Spinel

研制出一种滚镀镍铁合金新工艺。

A new process of barrel Ni-Fe alloy plating was developed .

镍铁合金吨产品理论电耗及生产成本的计算

Calculation of theoretical power consumption and production cost of nickel ferroalloy

用于电沉积工具的镍铁合金结合剂工艺研究

Study on Depositing Process of Nickel-iron Alloy for Electro-deposited Tools

高整平全光亮镍铁合金电镀的研究

Study on electroplating of HIGH-LEVELLING and full bright Ni-Fe alloy

从镍精矿中提取镍铁合金的还原工艺

Reduction Technology of Preparation of Ferronickel Powder from Nickel Concentrate

新型镍铁铸铁焊条的研制&新铸438

Development of a new type of Ni - Fe cast iron electrode

一种镍铁合金刷镀液的应用

A Solution for Brush Plating of Ni - Fe Alloy

台车连续炉生产镍铁金属化球团的实验研究

Study on metallization pellet production in car bottom continuous furnace

镍铁氧体/聚苯乙烯复合材料的制备与性能

Preparation and properties of the nickel ferrite / polystyrene composites