陶瓷刀具

táo cí dāo jù
  • ceramic tool
陶瓷刀具陶瓷刀具
  1. 新型Al2O3基陶瓷刀具材料颗粒弥散增韧与晶须增韧的协同作用

    Synergism of particle dispersion and Whisker Toughening for advanced ceramic tool material

  2. Al2O3/TiC系梯度功能陶瓷刀具材料的设计

    Design of al_2o_3 / tic functional gradient ceramic tool material

  3. 导电Al2O3基陶瓷刀具材料的超声&放电复合加工技术研究

    Combined Machining of USM and EDM for Conductive Al_2O_3-Based Ceramic Materials

  4. Al2O3基纳米复合陶瓷刀具材料的研制及切削性能研究

    Al_2O_3 Based Nanocomposite Ceramic Cutting Tool Material and Its Cutting Performance

  5. 高性能超细Ti(C,N)金属陶瓷刀具材料的研究

    Study on High-Performance Ultra-fine Ti ( C , N ) - based Cermets for Tool Materials

  6. Al2O3陶瓷刀具材料的研究和发展

    The Research and Development of Al_2O_3 Ceramic Cutting Tool Materials

  7. Al2O3基纳米陶瓷刀具材料纳观模拟研究

    Research of the Nano-scale Simulation of Ceramic Tool Materials Based on Al_2O_3

  8. SiC晶须增韧Al2O3陶瓷刀具材料的热胀失配分析

    The thermal expansion mismatch of tool material consisted of al_2o_3 and SiC

  9. 基于BP算法,建立了预测颗粒增韧复相陶瓷刀具材料各组分体积百分含量的预测模型。

    The model to predict volume content of composition in particle reinforced ceramics is established .

  10. TiN涂层陶瓷刀具膜&基界面应力的试验研究

    Experimental Study on Film-substrate Interfacial Stress of TiN Coated Ceramic Cutting Tool

  11. Al2O3/TiB2复相陶瓷刀具的力学性能及切削特性

    Mechanical Properties and Cutting Performance of Al_2O_3 / TiB_2 Composite Ceramic Cutting Tool

  12. Al2O3/TiC纳米陶瓷刀具材料的抗热震性能及断裂机理研究

    Thermal Shock Resistance and Fracture Mechanisms of Al_2O_3 / TiC Cutting Tool Nanocomposite

  13. 陶瓷刀具用Al2O3基复合材料的制备

    Preparation of Al_2O_3 Matrix Composites for Ceramic Cutting Tools

  14. 一种Al2O3基陶瓷刀具的切削性能研究

    Cutting Performance of a Ceramic Tool Based on Al_2O_3

  15. 钇对陶瓷刀具材料Al2O3/TiCN的强韧化效应

    Strengthening and Toughening Effect of Yttrium on Al_2O_3 / TiCN Ceramic Tool Material

  16. Al2O3基陶瓷刀具材料的超声波加工技术研究

    Uitrasonic vibration machining of alumina-based ceramic cutting tool materials

  17. 利用人工神经网络方法开发Al2O3/TiN系复相陶瓷刀具材料

    Development of al_2o_3 / tin multiphase ceramic cutting tool materials by artificial neural network

  18. 纳米TiN改性的TiC基金属陶瓷刀具切削试验与分析

    Cutting test analysis for TiC-based cermet tool modified by adding nano-TiN

  19. 金属陶瓷刀具用纳米TiN粉体分散的研究

    Development of Cermet Cutter by Nano-TiN Powder Dispersion

  20. 超细TiC(0.7)N(0.3)基金属陶瓷刀具性能

    Performances of Ultra fine TiC_ ( 0.7 ) N_ ( 0.3 ) Cermet Cutting Tools

  21. TiN/TiAlN涂层Ti(C,N)基金属陶瓷刀具的切削性能

    Investigation on cutting performance of TiN / TiAlN coated Ti ( C , N ) - based cermet cutting tools

  22. 研究了Al2O3-TiB2陶瓷刀具材料的高温氧化特性以及氧化对刀具耐磨性能的影响。

    The oxidation behaviors and wear resistance of Al_2O_3 / TiB_2 ceramic tool material were studied .

  23. SiC晶须和Ti(C,N)颗粒协同增韧Al2O3陶瓷刀具的研究

    SiC Whiskers and Ti ( C , N ) Particles Synergistically Toughened Al_2O_3 Matrix Ceramic Composites for Cutters

  24. Al2O3+TiC+Si3N4陶瓷刀具材料的切削性能试验

    Testing for Cutting Performance of Al_2O_3 + TiC + Si_3N_4 Ceramic Tool Material

  25. Al2O3/(W,Ti)C纳米复合陶瓷刀具材料的制备及切削性能研究

    Study on Preparation of Al_2O_3 / ( W , Ti ) C Nanocomposite Tool Material and Its Cutting Performance

  26. 微米/纳米复合Ti(C,N)基金属陶瓷刀具切削铸铁的性能研究

    Study on Cutting Performances for Cast Iron with Micron / nanometer Ti ( C , N ) - based Cermet Cutting Tools

  27. Ti(C,N)基金属陶瓷刀具的失效机理与参数优化

    Research on the failure mode and optimization of cutting parameter of Ti ( C , N ) - based cermet cutting tools

  28. Al2O3&TiB2陶瓷刀具材料的高温氧化及其对刀具耐磨性能的影响

    The Oxidation of Al_2O_3 ─ TiB_2 Ceramic Tool Material at High Temperature and Its Effect on Wear Resistance

  29. SiC颗粒弥散强韧化Si3N4陶瓷刀具材料

    Study of SiC Particle Reinforced and Toughened Silicon Nitride Base Ceramic Cutting Tool Material

  30. 人工神经网络在Al2O3/TiC/SiC多相陶瓷刀具材料开发中的应用

    Application of artificial neural network in the development of al_2o_3 / tic / sic multiphase ceramic cutting tool materials