韧度

rèn dù
  • Toughness;tenacity;viscosity
韧度韧度
韧度[rèn dù]
  1. 提高BHW-35钢电渣焊冲击韧度的试验研究&电渣焊跟踪喷水冷却新工艺

    Testing Research for Improvement of Impacting Tenacity of Electroslag Welded BHW-35 Steel

  2. 浅谈钢结构设计中钢材韧度级别的选择

    Discussion on the choice of steel tenacity grade in steel structure design

  3. 英国人对厕纸的要求最高方面当属柔软度,占57%,紧随其后的是韧度,占45%,厚度,占36%。

    Top of Britons ' toilet paper wish list is softness ( 57 % ) followed by strength ( 45 % ) and thickness ( 36 % ) .

  4. 明特尔公司的分析员杰克·达科特指出,“韧度、软度和厚度仍然是厕纸质量的三大主要指标,只有一少部分消费者会倾向于更加奢侈的品种,比如带有印花图案或是有香水味道的。“

    " Strength , softness and thickness remain the leading indicators of toilet paper quality , with just a small proportion of consumers preferring more luxurious alternatives , such as those with flower patterns of perfume , said Mintel analyst Jack Duckett . ' '

  5. 混凝土断裂韧度K(ⅡC)的试验研究

    Experimental study on fracture toughness K_ (ⅱ c ) of concrete

  6. 威布尔分布是描述管道焊缝金属断裂韧度指标δC的最佳拟合分布函数。

    But the optimum fitting distribution of the fracture toughness δ _C is weibull distribution .

  7. 孤立韧度与分数(a,b;n)-临界图

    On isolated toughness and fractional ( a , b ; n ) - critical graph

  8. 经多种数理统计检验,对断裂韧度指标δc的统计分布函数进行了统计拟合检验。

    The statistical distribution model was set up to fit the distribution function of fracture toughness δ c.

  9. R曲线法在焊缝金属延性断裂韧度测试中的应用研究

    Application of R Resistance Curve Method in Testing Ductility Fracture Toughness of Weld

  10. 延性断裂韧度J(ⅠC)测试中的钝化线方程

    Blunting line equation in ductile fracture toughness j_ (ⅰ c ) measurement

  11. 讨论了断裂韧度,并对确定应力强度因子K的方法作了阐述。

    The method for ascertaining the stress intensity of factor K is explored .

  12. 岩石三点弯曲圆梁断裂韧度K(IC)的测试研究

    An investigation for testing rock fracture toughness wth three-point bend round bars

  13. 两种材料的动态断裂韧度K(Id)的实验测定

    Experiment determination of dynamic fracture toughness K ID of two kinds of materials

  14. 三向石英复合材料的断裂韧度K(IC)的测试与分析

    Measuring and Analyzing on K_ ( IC ) of 3D SiO_2 / SiO_2 Composites

  15. 含B中碳低合金铸钢及B、Al、Ti的相互作用和对冲击韧度的影响

    Effect of Impact Toughness of B , Al , Ti Content in Mid-carbon Low Alloying B Cast Steel

  16. 支承形式对楔入劈拉试件断裂韧度K(IC)的影响

    Effect of support forms on fracture toughness K_ (ⅰ C ) of wedge splitting specimens

  17. 利用临界空穴扩张比参数V(GC)表征材料的延性断裂韧度

    The Critical Void Growth Ratio V_ ( GC ) a New Ductile Fracture Toughness

  18. 动态弹塑性断裂韧度J(Ⅰd)测试方法研究

    Study of the method used for measuring dynamic elastic-plastic fracture toughness

  19. 加载速率对大理岩动态断裂韧度(K(1d))的影响

    Influence of loading rate on dynamic fracture toughness of marble

  20. 一种利用双悬臂梁试样确定断裂韧度K(IC)的测试方法

    A experimental technique for determining fracture toughness k_ ( ic ) by the use of DCB specimen

  21. 压力容器用钢和舰船钢平面应变止裂韧度K(Ia)的行为表征

    Behavioral Characterization of Plain-Strain Arrest Toughness K_ ( Ia ) of Ship Steel

  22. 应变疲劳对钢材延性断裂韧度J(IC)的影响

    Influence of strain fatigue on J_ ( IC ) & the ductile fracture toughness of steels

  23. 伸长率和冲击韧度随着W含量由90%增至97%时逐步减小。

    And the elongation and impact toughness decrease with W content increasing from 90 % to 97 % .

  24. PMMA断裂韧度尺寸相关性的实验研究

    Experimental Study of Size Dependence of Fracture Toughness of PMMA

  25. 纤维增强砂浆的断裂韧度K(1C)试验研究

    Experimental Research on Fracture Toughness K_ ( 1C ) of Fibre Reinforced Mortar

  26. 人字形切槽短圆棒断裂韧度试样及其BEM标定

    The chevron notched short rod fracture toughness specimen and its BEM calibration

  27. 本文通过试验研究了三点弯曲梁试件厚度对砂浆和混凝土断裂韧度K(Ic)的影响。

    By means of experiment , the influence of specimen thickness on fracture toughness KIC of mortar or concrete has been investigated .

  28. 双K准则中起裂韧度K(IC)~(ini)的讨论

    Discussion on the initial fracture toughness K_ ( IC ) ~ ( ini ) in the double-K criterion

  29. 结果表明,这三种Al2O3基复合陶瓷拉丝模材料具有较高抗弯强度和断裂韧度。

    Results show that the Al2O3-based ceramic composite has strong fracture toughness and wear resistance .

  30. RE,Al复合变质处理可使铬钨合金白口铸铁的硬度、冲击韧度、耐磨性都得到提高。

    The hardness , impact toughness , wear resistance of the high chromium casting iron containing wolfram by RE-Al modification treatment are all improved .