齿轮油

  • gear oil;gear lubricant;gear compound
齿轮油齿轮油
  1. 介绍80W/90(GL-5)车用齿轮油的研制过程。

    The development of 80W / 90 ( GL-5 ) automotive gear compound is presented .

  2. 寒区工业齿轮油理想添加剂应由粘度指数改进剂、降凝剂、S-P型极压抗磨剂、酚型抗氧剂及苯三唑脂肪胺盐等组成。

    The ideal additives for industrial gear oil in cold area should be comprised of improver of viscosity index , pour point depressant , S-P extreme pressure wear inhibitor and benzo-triazole fatty amine .

  3. CKD齿轮油在减速齿轮箱的应用

    Application of CKD Gear Oil on Reduction Gearbox

  4. 对于润滑剂则重点介绍有关发动机机油的分类和CC、CD级柴油机油及其基础油的性能,机油中使用的添加剂和其它润滑剂如齿轮油、润滑脂等也作了叙述。

    D. grade of diesel oil and its base oil are also given . Other lubricant , such as gear oil and grease , is also briefly described .

  5. 重负荷车辆齿轮油GL-5的应用研究

    Investigation on the application of heavy duty automobile gear oil GL-5

  6. GL-5重负荷车辆齿轮油的成本及效益分析

    The Cost and Benefit Analysis of GL-5 Heavy-Duty Vehicle Gear Oil

  7. 75W/90GL-5车辆齿轮油添加剂研究

    The Investigation of Additives for 75W / 90 GL-5 Automotive Gear Oil

  8. 80W/90MT-1手动变速箱专用齿轮油应用研究

    An Application Research on 80W / 90 MT-1 Manual Transmission Specific Gear Oil

  9. 目前对于GL-5重负荷车辆齿轮油,在国内没有统一适用的换油周期。

    For GL-5 heavy-duty automobile gear oil , there has no consistent drain interval in China .

  10. 理论和实践证明,以评定油膜是否破裂为目标的PB和OK值,已不适于评定重负荷齿轮油和超级齿轮油。

    It is proved by theory and practice that , P B and OK values regarded evaluating the film is break or not as the target have not suited to evaluate the heavy duty gear oil and super grade gear oil .

  11. PG-2齿轮油复合剂的摩擦学性能研究

    Study on Tribological Behavior of PG-2 Gear Oil Additive Package

  12. 结果表明,油溶性纳米Cu添加剂具有优异的抗磨、减摩和极压性能,能够很好地改善85W/90GL-5重负荷齿轮油的摩擦学性能。

    The results showed that nano-cu additive possessed high load-carrying capacity , good anti-wear , friction reducing and extreme pressure performance . Thus the tribological behavior of said heavy-duty gear oil was improved significantly .

  13. 16T-30M门机卷扬减速器齿轮油的合理选用

    The reasonable selection for the gearbox oil of the 16t-30m portal crane hoist

  14. 结合国内外情况,对目前现场代用的18号双曲线齿轮油技术条件、使用性能与8K电力机车齿轮油进行了比较;

    The Paper Compared that specifications and use properties of No 18 hypoid gear oil today used not so 8K type electric locomotive draw gear oil as better .

  15. 本文介绍了利用HQ-1型摩擦磨损试验机评定车辆齿轮油抗擦伤能力的试验方法。

    This paper describes the testing method to evaluate the capability of scoring resistance of automotive gear oils by HQ-1 test engine .

  16. 超轻防震与亚欧信托基金的粘度等级比低EP90齿轮油。

    Supe rL ight ShockProof An EP90 gear oil with the viscosity rating lower than A TF .

  17. 尽管面世已经很久了,不过我们正在推出我们新的全合成GL-575W140齿轮油。

    It has been a long time coming , but we are introducing our new full-synthetic GL-575W140 gear oil .

  18. 研制了同商用齿轮油添加剂Hitec343具有相似结构和组成的PG-2复合剂;

    The PG-2 gear oil additive package with similar composition and structure as that of foreign commercial counterpart Hitec 343 was developed .

  19. 在昆仑牌GL-5车辆齿轮油中研究了4种修复促进剂对TiO2/SiO2纳米添加剂减摩及修复效果的影响,并分析其作用机制。

    The effect of four types of repairing accelerants on friction-reducing and self-repairing of TiO_2 / SiO_2 nano-additive were studied in Kunlun vehicle gear lubricant , the mechanism was analyzed .

  20. 介绍了CKD重负荷工业齿轮油在冶金行业减速齿轮箱的应用情况,国产CKD重负荷工业齿轮油可以代替进口油,使用周期超过1年。

    The application of CKD heavy - duty industrial gear oil on reduction gearbox is introduced in metallurgical industry , the service period of domestic CKD heavy - duty industrial gear oil , which can replace the imported oil exceeds a year .

  21. 开发了一种新的车辆齿轮油复合添加剂,其性能与进口的车辆齿轮油复合剂相当,该复合剂的添加量为4.2%,用它调配的齿轮油的质量超过GL-5的水平。

    A kind of new automotive gear oil package was developed , which performances were as equal as that of imported automotive gear oil package , the dosage was 4 . 2 % , and the quality of gear oil formulated with this package exceeded GL - 5 specification .

  22. 提出了符合85W/90粘度级别的基础油,讨论了影响GL-5汽车齿轮油性能的各种因素,给出了符合85W/90GL-5汽车齿轮油规格的油品配方。

    The base oil of meeting the requirements of 85W / 90 viscosity grade was suggested . Factors of influencing on properties of GL-5 automobile gear oil were discussed . And the formulation of oil which meets the specifications of 85W / 90 GL-5 automobile gear oil was also given .

  23. 多级节能汽车齿轮油的研究与应用

    Study of Multigrade Save Energy Automotive Gear Oils and Its Application

  24. 齿轮油中极压剂普遍选用硫化异丁烯;

    Sulfurized isobutylene is generally used as the extreme pressure additive ;

  25. LAN4201通用齿轮油复合剂的评定及应用

    Evaluation and application of LAN 4201 general gear oil complex additive

  26. 80W/90GL-5车辆齿轮油的研制

    Study & Formulation Of 80W / 90 GL-5 Vehicle Gear Oil

  27. 低剂量通用齿轮油复合剂的研究

    Preparation of low dosage general purpose additive package for gear oil

  28. RHY4021A齿轮油复合剂的研究与应用

    Preparation and application of rhy 4021A additive package for gear oil

  29. 粘指剂在车辆齿轮油配方中的应用考察

    Study on viscosity improvers used in formulation of automobile gear oil

  30. 齿轮油由变速器壳有效冷却。

    The gear-wheel oil is cooled sufficiently by the transmission housing .