丙烯酸丁酯

纳米TiO2粒子静电吸附引发剂及其原位锚固丙烯酸丁酯聚合

Electrostatic absorption of azo initiator onto tio_2 particles and in situ anchoring polymerization of butyl acrylate from modified tio_2

DOP氯化原位接枝丙烯酸丁酯（BA）后作为PVC的增塑剂，当BA含量在1～10份时材料的失重较少，而BA含量在10份时材料的强度及韧性最好。

The chlorinated DOP in-situ-grafted with butyl acrylate ( BA ) also gave rise to a low migration . When the amount of grafted BA was 10 phr , the plasticized PVC possessed superior strength and toughness .

丙烯酸丁酯改性C9石油树脂的研究

Study on Modification of C_9 Petroleum Resin by Butyl Acrylate

苯乙烯-丙烯酸丁酯无皂乳液聚合动力学及TEM分析

The Kinetics of Emulsifier-Free Emulsion Polymerization of Styrene-Butyl Acrylate and TEM Analysis

用IR，'H-NMR和SEM等手段对接枝共聚物的结构与形态进行了表征，证明反应物确为丙烯酸丁酯与玉米淀粉的接枝共聚物。

The structure and morphology of St-g-PBA were characterized with IR , 1H-NMR and SEM .

铈盐引发水解EVA乳液接枝丙烯酸丁酯反应研究

Grafting of butyl acrylate with EVA emulsion initiated by Ceric compound

丙烯酸丁酯与SBS接枝共聚物压敏胶的研究

Study of pressure sensitive adhesive based on Butyl Acrylate Grafted SBS block copolymer

KPS-Na2S2O3引发丙烯酸丁酯与玉米淀粉接枝共聚合反应的研究

Study on KPS-Na_2S_2O_3 Initiated Graft Copolymerization of Butyl Acrylate onto Corn Starch

甲基丙烯酸丁酯在纳米TiO2表面的原位接枝

Surface Modification of Nano-TiO_2 by in-situ Grafting Polymerization of Butyl Methacrylate

丙烯酸丁酯原位乳液接枝纳米TiO2的研究

Surface Grafting of Nano-TiO_2 with Butyl Acrylate by In-situ Emulsion

TGA分析表明，苯乙烯-丙烯酸丁酯/有机蒙脱土纳米复合材料的热稳定性有所提高。

TGA results indicate that thermal stability of composites is enhanced .

在相同接枝反应条件下，采用脱氯化氢PVC与丙烯酸丁酯接枝共聚可以提高接枝率和接枝效率；

By using dehydrochlorinated PVC in the graft copolymerization , the grafting degree and grafting efficiency of BA were increased .

用八甲基环四硅氧烷（D4）改性丙烯酸丁酯（BA）-苯乙烯（St）乳液，得到了稳定的改性苯丙乳液。

The stable modified butyl-acrylate styrene emulsion was prepared with octamethylcyclotetrasiloxane ( D_4 ) .

VAE/PA复合乳液的稳定性随接枝单体用量和软单体丙烯酸丁酯（BA）用量的增多而下降。

The stabilities of the composite emulsions decrease while the dosage of monomer and n-butyl acrylate ( BA ) increase .

再采用丙烯酸丁酯（BA）和功能单体对聚苯乙烯进行接枝改性，制成水乳型胶粘剂。

Then an emulsion adhesive was prepared by graft polymerization of Butyl Acrylate ( BA ) and other active monomers .

环氧树脂-丙烯酸丁酯IPN法制胶粘剂

Adhesive of epoxy n butyl acrylate by IPN method

Fe-Al催化马来酸酐与丙烯酸丁酯的聚合

The Copolymerization of Maleic Anhydride and n-butyl Acrylate with Coordination Catalyst Fe-Al

以醋酸乙烯酯（VAc）与丙烯酸丁酯（BA）为主要原料进行核壳乳液共聚合。

The core-shell emulsion copolymerization of vinyl acetate ( VAc ) and butyl acrylate ( BA ), was carried out .

研究了丙烯酸丁酯（BA）、聚苯乙烯（PS）的二甲苯溶液，以过氧化二苯甲酰（BPO）为引发剂制备聚苯乙烯/丙烯酸丁酯接枝物的溶液接枝反应。

PS is modified through the grafting with butyl acrylate in the xylene solution and initiated by benzoyl peroxide ( BPO ) .

本文以环己烷作溶剂，以丙烯酸丁酯和顺酐对SBS接枝改性制鞋用胶粘剂。

The adhesive prepared by grafting SBS with Bu acrylate and maleic anhydride , with cyclohexane as solvent , can be used for shoes .

用红外ATR光谱法和紫外光谱法研究了聚丙烯酸酯类和丙烯酸丁酯&苯乙烯共聚物的老化过程。

The ageing of polyacrylate and butyl acrylate styrene copolymer was investigated by IR ( ATR ) and UV spectroscopy .

氧气对316L不锈钢表面等离子体聚合甲基丙烯酸丁酯涂层性能及内皮细胞生长行为的影响

Effects of oxygen on the properties and behavior of endothelia cells of plasma poly n-butyl methacrylate on 316L stainless steel

余下的含氟丙烯酸酯单体与丙烯酸丁酯、甲基丙烯酸丁酯及丙二醇乙醚混合并加入偶氮二异丁腈，溶解后缓慢滴加入四口烧瓶中保温反应4h，制得含氟丙烯酸酯共聚物。

The rest fluorinated acrylic monomer is mixed with butyl acrylate , butyl methylacrylate and propanediol ether , and added by azobisisobutyronitrile .

采用三阶段种子半连续乳液聚合，制得了以BA（丙烯酸丁酯）-MMA（甲基丙烯酸甲酯）共聚物为核，BA-MMA-TFEA（甲基丙烯酸三氟乙酯）共聚物为壳的核壳型含氟丙烯酸酯乳液。

The core-shell fluorine-containing polyacrylate latex with poly ( butyl acrylate-co-methyl methacrylate ) core and poly ( butyl acrylate-co-methyl methacrylate-co-trifluoroethyl methacrylate ) shell was prepared by three-stage semicontinuous emulsion polymerization .

以互穿聚合物网络（IPN）方法合成丙烯酸丁酯与VAE共聚物乳液。

The copolymer latex of butyl acrylate and VAE was prepared by interpenetrating polymer networks ( IPN ) method .

研究了不同降解程度的天然橡胶胶乳与丙烯酸丁酯（BA）的接枝反应及反应条件对接枝率的影响。

The copolymerization of degraded natural rubber latex in different degree with butylacrylate and the effect of reaction conditions on the grafting ratio of butylacrylate degraded natural rubber latex were studied .

研究在微波场中用APS引发土豆淀粉与丙烯酸丁酯的接枝共聚规律。

A study of the grafted copolymerization of potato starch with butyl acrylate as comonomer , and APS as initiator by microwave radiation has been mode .

本文研究稀土化合物与三异丁基铝组成络合催化剂聚合甲基丙烯酸丁酯（BMA），考察催化剂的组分比、溶剂、不同的稀土元素和配体对聚合的影响。

This paper study on the polymerization of butyl methacrylate ( BMA ) by rare earth coordination catalysts .

采用自制的丙烯酸丁酯接枝甲基丙烯酸甲酯核壳结构增韧剂（PBAgPMMA，AIM）与聚氯乙烯（PVC）树脂熔融共混，制备了AIM/PVC共混物。

Core-shell structured acrylate impact modifier ( AIM ) particles of poly ( butyl acrylate ) grafted poly ( methyl methacrylate ) ( PBA-g-PMMA ) were synthesized , which were used to prepare AIM / PVC blends by melting process .

以St细乳液为种子乳液，加入第二单体丙烯酸丁酯（BA）溶胀24小时，继续聚合合成了AB型嵌段聚合物。

Then , the PS miniemulsion was used as seed emulsion , adding the second monomer BA , swelling for 24 hours and AB type copolymer was formed successfully in the RAFT miniemulsion polymerization .