刮刀

guā dāo
  • scraper;spatula;slicker;erasing knife;scraping cutter;carryall;facer
刮刀刮刀
刮刀 [guā dāo]
  • (1) [scraper;scraping cutter]

  • (2) 有一个把手和锋利刀片、用来迅速刮掉字迹的工具

  • (3) 钳工用来刮削金属的工具,一般为三棱型,硬度较高

刮刀[guā dāo]
  1. 振动离心脱水机与刮刀卸料离心脱水机是煤矿常用的两种离心脱水机

    The vibrating centrifugal dehydrator and scraper discharge centrifugal dehydrator are usually used in coal mine industry .

  2. 可采用浸、滚、挤压、刮刀或任何其它一般方式来进行

    Application is made by dipping , rolling , extruding , wiping , or any other conventional techniques .

  3. 反应热喷涂Al2O3用于涂布刮刀的研究

    Applied Research of Reactive Flame Spraying Al_2O_3 on Coating Blade

  4. 圆盘钢制带刮刀PIG的清洗技术在电厂排灰管线清洗中的研究和应用

    Study and application of PIG cleaning with disc steel scraper in removing ash pipe of power plants

  5. 西门子LOGO!控制器在刮刀涂布器上的应用

    Application of Siemens LOGO ! in Blade-coating Machine

  6. 用PDC四刮刀钻头,加快钻速,缩短浸泡时间;

    Using four blade PDC bit to improve penetration rate and shorten socking time ;

  7. 使用solidworks绘图软件,绘出了刮刀的实物图,并对结构参数进行了设计计算。

    Using solidworks plot software , we draw a practicality picture of scraper and calculate the structure parameters .

  8. 中试过程中,采用刮刀涂布方式进行了CF纸和热敏预涂试验,采用帘式涂布进行了CB纸和热敏面涂的涂布试。

    During the trial ," blade coating " was used for the thermal-precoat CF coating ;" curtain coating " was used for the thermal-coat CB coating .

  9. 对PIG清洗技术进行了简单介绍,并根据实例介绍了圆盘钢制带刮刀PIG的清洗技术在电厂排灰管线清洗中的研究和应用。

    The PIG cleaning technigue was introduced . The PIG cleaning technique with disc steel ( scraper ) was investigated . The application of the technique in removing ash pipelines of Fengzhen Power Plant was reported .

  10. 对传统的过氯乙烯腻子进行了改性,以适应现代化涂装的要求,确保腻子刮涂后2h即可打磨。刮刀涂布刮痕的产生及解决措施

    The traditional perchlorovinyl putty is improved to meet the requirements of modern coatings . The putty can be polished 2 hours after blade coating . The Countermeasures to the Scratch in Blade Coating Process

  11. 还有ZPG系列转盘刮刀式真空过滤机,DZG系列水平带式真空过滤机。

    ZPG series have wheel scraper-type vacuum filter , DZG Series Horizontal belt vacuum filter .

  12. 总监ThierryMuret可没有机会享用,他手握两支刮刀不停的转动丝滑的可可团,以保持巧克力的最佳温度(30°C),由此可可脂才能以最顺滑的方式凝结。

    Head chef Thierry Muret will have none of it , however , as he deftly moves the silky mass around with two spatulas , keeping the chocolate at the optimum 30 ° C so the cocoa butter crystallizes in its smoothest form .

  13. 根据实验应力分析原理,研究了三种剖面形状的全尺寸PDC刮刀钻头在常压下钻进红砂岩和白砂岩时,切削齿上的工作载荷。

    On the basis of the principles of experimental stress analysis , this paper studies the working loads on cutting teeth on full scale PDC drag bits of three profiles separately , while drilling red sandstone and white sandstone under atmospheric pressure .

  14. 分析表明:①等离子喷涂纳米及微米AT13涂层的组织致密,均匀,孔隙率低,结合强度高,两种涂层均能够满足在涂布刮刀上的应用要求。

    The results showed : ① Both of the nano and micron coatings prepared by plasma spraying process have dense and even microstructure , low porosity and higher bond strength . The two coatings all meet the application requirements of coating blade .

  15. 通过使用GKH全封闭虹吸式刮刀离心机,改进了原有老式离心机所产生的许多问题,从而大大提高了生产效率、产品质量和生产环境。

    Use of GKH Totally enclosed siphon centrifuge with a scraping cutter can resolve many problems of old centrifuge , thus greatly improving production efficiency , product quality and production environments .

  16. LL-9型离心脱水机存在处理能力低、入料粒度范围小等问题,主要原因是由于刮刀与筛篮设计不合理、过煤面积小造成的。

    LL-9 type centrifugal has limitations such as low disposal , small granularity range and so on . The main cause is that its scraper and basket are not designed logically and its area of coal crossing is small .

  17. 新型刮刀钻头刀片在某大桥施工中的应用

    The application of a new-type drilling scraper in one bridge construction

  18. 等离子喷涂制备陶瓷涂布刮刀的研究

    Research on Plasma Spraying in the Preparation of Ceramic Coating Blade

  19. 此段地层采用牙轮(刮刀)钻头钻进。

    Drilling with cone ( drag ) bit in the section .

  20. 钢或铁制活动的刮靴刀横向移动刮刀式整形机

    Movable boot scraper of iron or steel transverse moving blade shaper

  21. 进口刮刀式平网印花单元的结构特点

    Structural Features of Import Flat Screen Printing Unit with Doctor Blades

  22. 用刮刀以机械方式从风挡上去除粘合胶残留物。

    Remove adhesive residues from the windscreen mechanically using a scraper .

  23. 用刮刀刮去墙纸非常耗时。

    Using a scraper to remove wallpaper can be very time-consuming .

  24. 起因是在涂布时有一颗料积聚在刮刀后面所致。

    Caused by a particle lodged behind the blade during coating .

  25. 纸机刮刀装置的设计、应用与维护

    Design , Application and Maintenance of Doctor Device of Paper Machine

  26. HZ160/4SIE刮刀离心机主轴设计述评

    Review on the Spindle Design HZ160 / 4SIE of Peeler Centrifuge

  27. 然后把面粉筛入,用橡皮刮刀将其拌匀。

    Very gently fold in the sifted flour with a spatula .

  28. 大庆调整井刮刀钻头优选参数钻井技术

    Optimal Parameter Techniques with Drag Bits in Adjustment Wells in Daqing Oilfield

  29. 刮刀卸料离心机整机平衡的原理和方法

    The Principle and Method of Whole Machine Balancing for Scraper-discharge Material Centrifuge

  30. 造纸机烘缸刮刀的移动往复式气动控制

    To-and-fro Removal Pneumatic Control for Paper Machine Dryer 's Scraper