机械轴

直线感应加速器机械轴精密对中方法

Method for the mechanical axis alignment of the linear induction accelerator

大型旋转机械轴温监测的研讨

A Study on the Monitoring for the Temperature of the large Rotation Mechanical Axis

机械轴类零件CAD系统研究与实践

Research and Practice on a New Type CAD System For Axis Parts of Machines

据美国TEXAS州Monsanto化工公司的有关报道称，在所有的振动事故中，有60%是由机械轴不对中引起的。

An unplanned production stop due to machine breakdown will result in production loss and high costs . According to the research of Monsanto Company TEXAS USA , nearly 60 % of all breakdowns in rotating machines are caused by misalignment .

柱销联轴器在机械轴联接方式上的应用

The application of pin coupling in the shaft-joint of marine machinery

颗粒对水力机械轴面流场的影响

Influence of Spherical Particles upon Axial Flow Field in Hydraulic Machinery

基于小波分析的机械轴裂纹的检测

Application of Wavelet Analysis in Identification of Axis Cracks

在风力和负载变化的情况下，能最大限度保持机械轴的输出稳定性。

In changeful wind conditions and load fluctuation maximizes the stability of shaft output .

使用霍尔探头来测定四极磁铁的磁轴和机械轴之间的距离

Determination of the distance between magnetic and mechanical axis of quadrupole magnets using a Hall probe

电力测功机利用电机测量各种动力机械轴上输出的转矩，并结合转速以确定功率的设备。

Because they were measured power machinery may have a different speed , so for electric motor dynamometer must be smooth and speed of the motor .

机械轴对中（即同轴），以及确保安装过程中各部件之间的同心度是动力机械等装配工作中十分重要的一步，是机组安装及检修过程中保证质量的关键一环。

The shaft alignment and the concentric between the parts are very important process in assembling ; also it 's the key to ensure the quality of installation and repairing .

结果发现在晶片机械轴垂直表面上扭转极化电荷密度分布是非均匀的，而是以电轴为分界线成反对称分布。

The results of calculation and simulation indicate that the bound charge density on the surface perpendicular to the mechanical axis is nonhomogeneous and antisymmetric with respect to the electric axis .

通过与其它联轴器的比较，论述了柱销式联轴器在船用机械轴联接方式上应用的诸多优点，并提供设计和应用中的一些经验和数据。

In comparison with other couplings , this paper gives a lot of advantages of appling pin-type coupling on marine machinery , and offers some experience and requisite data for design and appling .

主要论述了在大型相控阵雷达天线机械轴的标校中如何使用现代光学测量技术和设备，从而提高测量的精度和测量的效率。

How to use the modern optical surveying technology and instruments to improve precision and efficiency of the calibration of antenna mechanical axis in large phased array radar has been presented in this paper ;

分析了旋转机械轴不对中的原因，建立了该故障的动力学模型，并用数值分析方法进行理论分析，得出了不对中故障振动特性，通过具体实例验证了不对中故障的振动特性。

A dynamics model of the fault is built . The fault in theory by numerical analysis method is analyzed . The vibration characteristics of misalignment fault by a ventilator vibration experiment is performed .

结果表明，对下肢机械轴即髋膝关节中心连线作用而言，在解剖基准位，髂腰肌对髋关节有旋内功能。

Result enunciation : In regard to the machine axes of lower extremity ( hip and knee joint center on-line ), at standard anatomic attitude , the iliopsoas have the function of inside-revolve to hip joint .

本文介绍了水力机械轴对称有势流动的表达式，然后，根据颗粒在水力机械中的运动轨迹，探讨了稀疏颗粒对轴面流场的影响，并计算了流场。

This paper has derived the expression of axially symmetrical flow in hydraulic machinery . The influence of a dilute particle system of axial flow field is explored on the base of a trajectory of the particles in movement , and its flow field is computed .

临床骨愈合时间平均为12.6周，X线片检查胫骨平台均未发生二期塌陷，无膝关节机械轴对线不良，膝关节屈曲125°～135°（平均128.5°）。

The mean time for bone union was 12.6 weeks . According to the postoperative X-ray examination , there was no depression of the tibial plateau or change of the knee mechanics . The flexion of the knee achieved 128.5 ° ( from 125 ° to 135 ° ) .

铁路大型养路机械传动轴的磁粉探伤

Magnetic particle inspection of the driven shafts of railway maintenance machinery

工程机械传动轴的概率断裂力学分析

Probabilistic fracture mechanics analysis of drive shaft in construction machinery

求解工程机械传动轴刚度的新算法

A New Algorithm for Calculating the Rigidity of Engineering Mechanical Transmission Shaft

机械式轴对称矢量喷管动态偏转的矢量特性研究

Performance of Mechanical Axisymmetric Vectoring Nozzle During Dynamic Deflection

遥测技术在重型机械旋转轴力能参数测试中的应用

The remote measure technique has application in revolving spindle strain in heavy machinery industry

混流可逆式水力机械转轮轴面流道的计算机辅助设计

The Design for the Runner Axis Flow-path of the Francis Pump Turbine by CAD

工程机械销轴结构设计

Design of Pin Structure for Construction Machinery

本文从理论上研究水力机械转轮轴面流道的设计方法。

A new theory is discussed for designing the meridian plane flow-passage in the runners of hydraulic machinery .

MCAT-系列使用一个单一的机械密封轴代替两个双轴式泵提供延伸。

The MCAT-series utilizes a SINGLE mechanical shaft seal instead of two that double shaft extended type pumps provide .

对比分析了风力机与直流电动机在功率和转矩输出特性上的相似之处，并且建立了机械传动轴的数学模型。

The characteristic of wind turbine and DC motor are contrasted , and the mathematical model of mechanical shaft is established .

同样地，机械密封轴部件取代，不需要从泵体上移除。

Likewised , should the mechanical shaft seal assembly require replacement , the gear set dose not have to be removed from the pump .

对旋转机械的轴弯曲、滚动轴承故障、电机定子松动的振动检测方法进行总结，认为轴弯曲故障也可能造成2倍频为主的频率成份；

The methods of vibration checking to winding of axle for rotary , failure for rolling bearing and flexibleness of stator for motor have been summarized .