涂敷

H7氢钟腔-泡结构特征和储存泡涂敷技术

Characteristics of the cavity-bulb construction of the hydrogen maser h_7 and coating technology of the storage-bulb

利用分光光度计研究玻璃PLOT柱载体层涂敷技术

Utilization of a spectrometer in the study of the glass PLOT column coating

涂敷薄膜时，通常是将玻璃置于真空之中，然后使冰晶石或氧化镁晶体气化，令其沉积于玻璃表面上。

The film is deposited on the surface of the glass by evaporating crystals , usually of cryolite or magnesium fluoride , in a vaccum .

PLC在汽车传动轴涂敷系统中的应用

Application of PLC in Auto - propeller Shaft Anointment System

溶胶凝胶旋转涂敷技术制备ZnO∶In薄膜的结构特性

Structural properties of ZnO ∶ In thin films prepared by sol-gel spin-coating technique

介质涂敷电大腔体电磁散射IPO研究

IPO for Analysis of EM Scattering by Dielectric Coated Electrically Large Cavities

局部涂敷RAM复杂目标的电磁散射特性计算

Computation of Electromagnetic Scattering Character from Complicated Object Partially Coated with RAM

涂敷薄RAM的平板和立方体的雷达散射截面

The RCS of plate and cube coated with thin RAM

Ti基表面激光涂敷生物陶瓷初探

Laser Cladding Bioceramic Coating on Ti-substrate

目前制备白色LED的主要方法是把黄色荧光粉涂敷蓝色LED芯片上。

At present , the main method to prepare white LED is using yellow fluorescent powder to spread on LED chips .

PIG管道内涂敷技术

PIG piping inner coating technique

实时监测激光核聚变靶球涂敷状态的CCD成像系统设计

Design of a CCD Imaging System for Monitoring Status of Micro-Sphere in Laser Fusion Target at Real-Time

用FDTD方法分析涂敷目标的散射

Using FDTD Method to Analyze the EM Scattering of A Coated Object

用FDTD计算各向异性磁化等离子体涂敷二维目标的RCS

RCS of 2-D target loaded with anisotropic magnetized plasma computed by FDTD

涂敷手征媒质的电大目标RCS仿真研究

RCS simulation of electrically large target coated with chiral medium

金属平板涂敷吸波材料的RCS计算研究

Research on RCS Calculation of Metal Plate Coated with RAM

研究了直接退火处理和涂敷CdCl2甲醇饱和溶液后退火处理对CdS薄膜的影响。

The influence of annealing and CdCl_2 treatment on CBD-CdS thin film was studied .

Ti离子在介孔MCM-41中涂敷合成条件研究

The Study of Ti Ions Post-synthesis in Mesoporous MCM-41

复杂涂敷目标的RCS计算

Calculating RCS of Complex Target Coated with RAM

炭纤维涂敷TiO2增强羟基磷灰石复合材料的微观结构研究

Microstructure Investigation of TiO_2-coated Carbon Fiber Reinforced Hydroxyapatite Composites

PDP中的荧光粉是通过丝网印刷的方法涂敷的。

The phosphor in PDPs is coated by screen printing method .

对一系列涂敷吸波材料的金属平板进行了RCS测试和理论计算。

RCS has been measured and calculated for a series of metal planes coated with RAM .

应用时域有限差分方法（FDTD）分析涂敷了吸收材料的一种突防弹头的雷达散射截面（RCS）。

Using FDTD method , the RCS of a missile head coated with absorbing material is analyzed .

渐近波形估计技术在涂敷导体柱宽角度RCS快速计算中的应用

Application of AWE to Fast Calculation of Wide Angle RCS of 2-D Conducting Cylinder Covered by Dielectric

采用环氧树脂涂敷法加快对SF6泄漏的维修速度

Epoxy Coating Speeds SF_6 Leak Repair

PDP荧光粉涂敷技术新进展

Recent development of PDP phosphor printing technology

系统研究了二次涂敷封装方案对光纤光栅（FBG）温度特性的影响。

The influence of the second coating on the fiber Bragg Grating ( FBG ) temperature sensitivity is researched .

结果表明经过Ar射频等离子处理后，溅射法和涂敷法制备的TiO2薄膜组装的光电池的光电流分别提高了约80%和60%。

By Ar plasma treatment , the photo-currents of sputtered and coated TiO2 electrodes increased by 80 % and 60 % , respectively .

采用溶胶凝胶法，结合旋转涂敷技术在石英衬底上制备了210&240nm厚度的ZnO∶In薄膜。

ZnO ∶ In thin films with thickness varying in the 210 & 240nm range were prepared on quartz substrates by sol_gel spin_ coating technique .

该技术的关键是在处于气相环境中的金属表面上涂敷一层CK固体电解质。

The key of the technology is to coat a solid CK electrolyte layer on the metal surface in atmosphere condition .