溶液法

ZnO棒晶阵列薄膜的水溶液法生长

Preparation of ZnO Films with Rod Crystal Arrays by Aqueous Solution Method

介绍用溶液法合成PE－g－马来酰亚胺（MI），并研究它作为相容剂对PET／PE共混物热、力学性能和形态结构的影响。

S PE-g-Maleimide ( MI ) was synthesized by means of solution method , and the effects of the prepared PE-g-MI on thermal mechanical properties and morphological structure during blending of PET / PE were studied .

ZnO纳米结构的溶液法合成及生长机理研究

Synthesis and Growth Mechanism of ZnO Nanostructures Via a Solution Method

双钙钛矿型La2CuMnO6的化学溶液法合成和结构表征

Chemical Solution Synthesis and Structural Characterization of Double Perovskite-type Oxide La_2CuMnO_6

电解有机溶液法在Si表面制备类金刚石薄膜及退火对其结构的影响

Electrodeposition of diamond-like carbon films from organic solvents and effects of Annealing on the film structure

ABS溶液法接枝α-甲基丙烯酸的研究

Solution Graft Copolymerization of α - methacrylic Acid onto ABS

化学溶液法脱除CO2是工业中一项传统的净化气体的方法。

The scrubbing of CO _ 2 by solvent is a traditional process for gas purification .

溶液法聚乙烯/石墨PTC导电复合材料的研究

Study on HDPE / Graphite PTC Conductive Composites Prepared by Solution Mixing

溶液法PVDF压电薄膜极化工艺研究

Polarization process research of PVDF film in solution fabrication method

溶液法低温合成SiO2凝胶及其玻璃

The Syntheses of Gels and Glasses at Low Temperature

采用溶液法进行了ABS接枝马来酸酐、苯乙烯双单体的研究。

The grafted modification of ABS in solvent with two different monomer maleic anhydride and styrene was studied in this paper .

目前，工业上广泛应用的CO2捕集方法主要有有机胺水溶液法和热碱法。

Nowadays , technologies of capturing carbon dioxide using aqueous organic amines and inorganic base solutions have extensively carried out in the industry .

用溶液法合成了一种具有独特结构的单组分PU胶粘剂，考察了扩链剂、表面处理剂、固化剂及PU胶粘剂的分子量等对粘接性能的影响。

The effects of factors such as chain lengthening agent , surface-treating agent and hardener on polyurethane adhesive properties were studied .

~（13）C-NMR研究溶液法丁苯共聚物的微观序列

A Study on Microsequence of Solution Styrene-Butadiene Copolymer by ~ ( 13 ) C-NMR

VPO催化剂前驱体的溶液法合成和结构研究

Solution Synthesis and Structure of VPO Catalyst Precursor

分析表明，与机械混合法相比，缓冲溶液法能够使Ni在YSZ基质中分布更均匀。

It was found that the buffer-solution method , compared with the mechanical mixing method , can assure more homogeneous distribution of Ni in YSZ substrate .

对溶液法聚乙烯（PE）工艺的特点进行了描述，介绍了近几年溶液法PE技术在催化剂、聚合工艺和设备方面的进展。

This paper described the characteristics of solution polymerization polyethylene ( PE ) process and briefly introduced the recent years ' advances in catalyst , technology and equipment of the solution polymerization PE .

用化学溶液法在P-Si（100）衬底上制备出了一系列不同退火温度的Bi3.25La0.75Ti3O12（BLT）铁电薄膜。

BLT thin films were prepared on P-type Si ( 100 ) substrates by chemical solution deposition ( CSD ) .

用溶液法合成SBS-g-MAH。

SBS - g-MAH was synthesized in solution in this paper .

而采用低温水溶液法合成了大量的ZnO纳米管，并且通过改变KOH碱溶液的浓度能够对ZnO纳米管的长径比加以控制。

However , low temperature aqueous solution can obtain a large number of ZnO nanotubes . Controllable aspect ratio of ZnO nanotubes can be achieved through regulation the concentration of KOH solution . 3 .

以过氧化戊二酸为引发剂，无水乙醇或丙酮为溶剂，采用自由基型溶液法合成了端羧基聚丁二烯，并用IR对聚合物的微观结构进行了表征。

The factors effecting the properties of carboxyl terminated liquid polybutadiene synthesized by free radical solution polymerization with pentane diacid peroxide as initiator and anhydrous ethanol or acetone as solvent were studied . The microstructure was characterized by IR .

介绍了超临界流体快速膨胀法、超临界流体抗溶剂技术、浸渍法、化学反应法、雾化气体饱和溶液法等超临界CO2技术制备微胶囊的原理和特点；

Supercritical fluid technology , including rapid expansion of supercritical solution , supercritical antisolvent , dipping , reaction and atomization of gas-saturated solution etc. used to encapsulate microparticles and the principles and characteristics of these methods are reviewed .

溶液法合成锂离子电池的阴极材料LiZnxNi（0.5-x）Mn（1.5）O4及其电化学性质研究

Synthesis and electrochemical properties of LiZn_xNi_ ( 0.5-x ) Mn_ ( 1.5 ) O_4 as cathode material for lithium-ion battery

混合溶液法的精密度、反应现象、读数误差、试剂用量及费用等方面均优于KI溶液法。

Several as-pects were compared , such as accuracy , phenomenon , reading error , cost and the use level of reagent . Mixed solution method was superior to KI solution method .

方法采用饱和水溶液法和研磨法制备包合物，以包合率及产率作为指标评定工艺优劣，并通过紫外光谱法、红外光谱法和X射线衍射法对包合物的形成进行验证。

Methods Use the saturated aqueous solution method and grinding method to prepare the inclusion complex , use the rate of inclusion and yield to assess the advantages and disadvantages of technology , and identify the inclusion complex by ultraviolet spectroscopy 、 infrared spectroscopy and X-ray diffraction method .

对国外乙丙橡胶（EPR）生产概况、技术特点及发展态势作了简述，并对EPR的溶液法、悬浮法、简化悬浮法和气相法等4种生产方法作了技术经济评估。

This is a review with 40 references on the production , technology and development trends of ethylene-propylene rubber ( EPR ) abroad . The technical economic evaluation on four production methods of EPR was carried out .

溶液法生长氘化磷酸二氢铵（DADP）晶体及其性能研究

Growth of Deuterated Ammonium Dehydrogen Phosphate ( DADP ) Crystal from Solution and Its Characterization

通过溶液法，成功地制备了氧化铝掺杂聚酰亚胺纳米复合薄膜。探讨了Al2O3用量对聚酰亚胺纳米复合薄膜拉伸强度、热性能、电气强度的影响。

A series of Al_2O_3 doped polyimide ( PI ) composite films was successfully prepared via solution process , and the effect of the content of Al_2O_3 on the tensile strength , thermal property and breakdown strength of the composite films was studied .

以正己烷/苯为溶剂，过氧化二苯甲酰（BPO）为引发剂，溶液法合成了丙烯腈-三元乙丙橡胶-苯乙烯接枝共聚物（AES）。

Acrylonitrile EPDM styrene ( AES ) graft copolymers were synthesized by solution graft polymerization of styrene ( St ) and acrylonitrile ( AN ) onto EPDM in n hexane / benzene solvent with benzoyl peroxide ( BPO ) as initiator .

以有机硅&双丙烯酰胺为复合交联剂、K2S2O8为引发剂，采用溶液法合成了丙烯酸钠与丙烯酰胺共聚物吸水剂。

Sodium acrylate and acrylamide copolymer absorbent agent are synthesised using organosilicon-dimethyl acrylamide as compounded cross-linking agent , K 2S 2O 8 as initiating agent .