玻璃陶瓷材料
- 网络glass ceramic material
-
目的:评估新型热压铸入型玻璃陶瓷材料的生物安全性。
Objective : To evaluate biological safety of new type hea t-pressed glass ceramic material .
-
热压铸入型玻璃陶瓷材料的初步研制Ⅰ.材料的制备、结构分析及性能测试
Preliminary study on heat - Pressed glass ceramic material ⅰ . Prepare , structural analysis and properties test of the material
-
LTCC基板用玻璃陶瓷材料的制备及性能
Preparation and Properties of Glass Ceramic Materials for LTCC
-
采用JL-1155型激光粒度仪、X射线衍射仪、傅立叶红外转换光谱仪、扫描电子显微镜进行表征分析。主要观察指标:①新工艺溶胶-凝胶法制备的玻璃陶瓷材料的晶型结构、显微结构。
JL-1155 laser particle analyzer X-ray diffraction Fourier transform infrared spectroscopy and scanning electron microscope were used for micro-morphological structure analysis .
-
采用溶胶-凝胶法低温合成了CaO-SiO2:Eu~(3+),Bi~(3+)发光玻璃陶瓷材料。
The luminescent glass-ceramics material of CaO-SiO_2 , Eu ~ ( 2 + ), Bi ~ ( 2 + ) was prepared at low temperature by sol-gel method .
-
单向碳化硅短纤维增强玻璃陶瓷材料弯曲断裂行为的研究
Bending Fracture Behavior of Unidirectional Short SiC Fibers / Glass-Ceramic Composites
-
透明玻璃陶瓷材料,则克服了粉末、单晶和玻璃的这些缺点,更有研究价值和应用潜力。
The transparent glass ceramics materials have overcome these shortcomings .
-
钻削工艺参数对氟金云母玻璃陶瓷材料去除率的影响
Effects of Drilling Technological Parameters on Material Removal Rates of Fluorophlogopite Glass-Ceramics
-
结论:新型热压铸入型玻璃陶瓷材料具有良好的生物安全性,符合临床应用标准。
Conclusions : the new material exhibited good biological safety for clinical trial .
-
激光玻璃陶瓷材料的研制是继激光单晶和激光玻璃之后固体激光材料的又一重大突破。
Laser glass-ceramics materials are a significant breakthrough after the laser single crystal and laser glass .
-
金属封接玻璃陶瓷材料要求有高力学强度及与金属相匹配的热膨胀系数。
Suitable thermal expansion coefficient and high strength are prerequisite of glass - ceramics for sealing with metal .
-
结果表明:刀具材料和冷却方式是影响玻璃陶瓷材料加工去除的主要因素。
The experimental results show that the tool materials and cooling condition have obvious influences on material removal rates .
-
对可切削玻璃陶瓷材料来讲,其内部云母微晶相的含量及云母晶体间交错程度的大小直接影响材料的性能。
Owing to the content of micro-crystal phase of mica and the interleaving degree will affect the performance of Machinable Glass-ceramics directly .
-
鉴于其晶相组成及良好的微观结构,通过新型溶胶-凝胶工艺开发的生物活性玻璃陶瓷材料可望被用于骨修复材料及骨组织工程支架材料。
It is expected that the AW glass-ceramics prepared by newly developed sol - gel method will be a bone grafting material and carrier material for bone tissue engineering due to its excellent crystalline structure and micro-structure .
-
在国内外还未见此研究的报道,本成果已经申请国家发明专利,为科学工作者进一步开发先进的生物活性玻璃陶瓷材料奠定了坚实的基础。
No research reports as the same have been seen at home and abroad . The achievement in this work has been applied for the national patent of invention , which has laid a solid foundation for further development of bioactive macor material .
-
生物活性玻璃陶瓷材料是一种力学性能、生物活性和生物相容性非常优异的材料,长期以来,作为人体硬组织的修复和替代材料为人类健康水平的提高发挥了重要的作用。
Bioactive glass-ceramic is a type of biomaterials with excellent mechanical properties , bioactivity and biocompatibility . For a long time , bioactive glass-ceramic has played an important role for improving the health level of human being as a bone repairing and replacement material .
-
采用溶胶固化法制备了碳纤维(C_f)补强的锂铝硅(LAS)玻璃陶瓷复合材料。
Carbon fiber-reinforced composites with LAS glass-ceramic matrix were prepared by using LAS sol as the binder .
-
在玻璃陶瓷基板材料中加入PS有机球能有效地降低基板的介电常数,但同时影响基板的抗折强度。
The addition of PS can reduce the dielectric constant of glass-ceramic substrate materials effectively , but reduce the flexural strength at the same time .
-
通过以TeO2,GeO2,ZnF2,SiO2,PbF2等为主体的氟氧化物玻璃陶瓷基质材料的研究提出了提高上转换效率的某些条件。
Some conditions are put forward about improving the up-conversion efficiency through study of oxy-fluoride glasses based on TeO 2 , GeO 2 , ZnF 2 , SiO 2 and PbF 2 . Hosts with low phonon energy benefit the energy up-conversion .
-
玻璃陶瓷复合材料的制备、微结构和性能
Preparation , microstructure and properties of glass / ceramic composites
-
生物活性玻璃陶瓷种植材料与牙龈上皮细胞体外界面的超微结构研究
Ultrastructural Study of Epithelial Cells Attachment to BGC Implant Materials
-
氧化铝玻璃渗透陶瓷材料生物相容性的研究
Study on biocompatibility of glass infiltrated alumina ceramics
-
新型牙科氧化锆玻璃陶瓷复合材料初探
The Preliminary Study on A New Dental Glass - Ceramics Strengthened and Toughened by Zirconia
-
钛表面生物活性玻璃陶瓷涂层材料的制备及结构分析
Preparation of BGC-Ti coatings and structure
-
选择适当的钻削工艺参数,可以提高氟金云母玻璃陶瓷的材料去除率。
High material removal rate of fluorophlogopite can be obtained if suitable drilling parameters are selected .
-
最后探讨了提高玻璃-陶瓷材料封接性能的可能途径。
At last , the possible ways to improve the sealing performance of glass-ceramic material were discussed .
-
SiCf/LAS玻璃陶瓷基复合材料的界面
Interface of sic_f / Las glass-ceramics matrix composite
-
微孔挤压技术制备SiCw补强CMAS玻璃陶瓷基复合材料
Preparation of SiC w reinforced CMAS glass_ceramic matrix composite by micro_ hole extrusion technique
-
平板式SOFC玻璃陶瓷封接材料研究进展
Research of glass ceramic sealing materials in planar Solid Oxide Fuel Cell
-
AW生物活性玻璃陶瓷多孔支架材料制备及性能研究
Study on Preparation and Property of Porous AW Glass - ceramic Scaffold