电刷镀

系统研究了激光强化电刷镀技术的原理、特点、设备、工艺、镀层性能及强化机理。

In this work , Principle , characteristics of Laser Enhanced Electro Brush Plating Technology ( LEBP ) was introduced and equipments was practiced .

采用电刷镀技术制备了nZrO2/Ni纳米复合镀层，研究了镀层的接触疲劳性能。

The nano composite coating of n ZrO 2 / Ni prepared by electro brush plating and its contact fatigue property was investigated .

电刷镀Cu／Ni纳米多层膜的微动磨损性能

Micro-motion wear resistance of electro-brush plated Cu / Ni nano-multilayer film

激光强化电刷镀Ni镀层耐磨性研究

Wear Resistance of Ni Coating Prepared by Laser Enhanced Electro-brush Plating

电刷镀NiWCo三元合金镀液及工艺研究

Study on Liquor of Brush Plating Ni-W-Co Allay and Brush Plating Process

激光电刷镀Ni基镀层表面形貌及相结构研究

Research on Morphologies And Phase Structure of Laser Brush Plating Ni Based Coatings

镍基纳米Al2O3粉末复合电刷镀镀层的耐磨性

Wear resistance of Ni / Nano-Al_2O_3 composite coatings plated by composite brush plating

电刷镀纳米Al2O3/Ni复合镀层的组织与接触疲劳性能研究

Microstructure and Contact Fatigue Performance of n-Al_2O_3 / Ni Composite Coating by Electro-brush Plating

电刷镀技术在修复ND2型机车柴油机下机体上的应用和探讨

Application and investigation of electroplating technique in renovating lower blocks of ND_2 locomotive diesel engines

Ni-P非晶镀层的电刷镀制备工艺及其性能的研究

Study of Ni-P Amorphous Coatings by Electro Brush-plating and Its Properties

应用电刷镀技术制备了含有纳米SiC粉的镍基复合镀层，对该复合镀层的显微硬度和摩擦学性能进行了测试，并讨论了主要工艺参数对这些性能的影响规律。

In this paper , the composite coating of Ni / nano SiC was prepared by brush-plating technology .

在NiP电刷镀工艺的基础上，研究和开发了NiWP电刷镀工艺，镀液中加入钨酸盐。

Brush plating of Ni-W-P ternary alloy was developed in which tungstate was added into Ni-P binary plating solution .

（Ni-P）-SiC复合电刷镀

( Ni - P ) - SiC Composite Brush Plating

电刷镀非晶态Ni-P合金镀层形貌和结构研究

Morphology and microstructure of amorphous Ni-P alloy coatings prepared by electro brush-plating

本文研制出一种新型NiCuP／MoS2电刷镀固体润滑复合镀层。

This Paper developed a new kind of Ni-Cu-P / MoS2 solid lubricating deposit by brush plating .

电刷镀含纳米SiC粉复合镀层的EPMA分析

EPMA Analysis of Brush-plating Ni / nano-SiC Composite Coating

研究了电刷镀Ni-P合金镀层的制备工艺，检验了镀层的耐蚀性和硬度等性能。

Technology for preparation of a brush plated Ni - P alloy coating was studied .

磷含量与热处理对电刷镀Ni-P合金的组织结构和性能的影响

Effects of phosphorus content and heat-treatment on the structures and properties of brush-plating Ni-P alloys

MCS-51单片机在电刷镀中的应用

The Application of MCS-51 in Electric Brush Plating

电刷镀Ni-P合金工艺及其耐盐雾腐蚀性能研究

Study on Process and Corrosion Resistance of Ni-P Alloy Brush Plating layers in Salt Spray Test

TL电刷镀Ni-Cu-P非晶态合金工艺研究

Study on the Technology of Ni-Cu-P Amorphous Alloy TL Brush Plating

采用电刷镀技术制得了纳米复合镀层，并用SEM和TEM对其表面形貌、断面组织和微观结构进行了表征，探讨了镀层的生长过程。

The nano-composite coating was prepared by electro-brush plating . Surface and section morphology and microstructure of the coating were characterized by SEM and TEM .

电刷镀Ni-W过渡层与离子镀TiN复合涂层的结合力和磨损特性

Adhesion Strength and Wear Behavior of Ion Plating TiN Composite Coating with Electric Brush Plating Ni W Interlayer

电刷镀技术对Fe3Al基合金室温环境脆性的改善作用

Improvement of room temperature environmental brittlement of fe_3 Al-based alloy by electro-brush plating

可溶性阳极电刷镀纳米晶Ni-Fe合金镀层的退火再强化

Annealing hardening of nanocrystalline Ni-Fe alloy coatings synthesized by brush plating using soluble anode

激光强化电刷镀n-Al2O3/Ni复合镀层残余应力研究

Study of residual stress of n-Al_2O_3 / Ni composite coatings prepared by laser-enhanced electro-brush plating

抽屉滑轨成型模具的Ni-W（D）合金电刷镀修复

Repairing of Drawer Glide Shapeable Mould by Brush Plating Ni-W ( D ) Alloy Layer

n-Al2O3/Ni电刷镀复合镀层组织与沉积机理

Study on Microstructure and Co-deposition Mechanism of n-Al_2O_3 / Ni Composite Coating Prepared by Electro-brush Plating

利用电刷镀技术在A3钢基底上制备了Ni-PTFE纳米复合镀层；

Ni-PTFE nano-composite coatings were deposited on A3 carbon steel substrate using brush electro-plating technique .

电刷镀Ni-P-Al2O3-碳纳米管复合镀层工艺研究

Study on Ni-P-Al_2O_3-Carbon Nanotubes Composite Brush Plating Process