电炉炼钢

直接还原铁是电炉炼钢的重要铁源之一。

DRI is one of the important sourses of EAF steelmaking .

（炼钢）酸性转炉欧洲电炉炼钢技术装备的发展与现状

Acid-lined converter Existing Status and Development of EAF Steelmaking in Europe

从电炉炼钢烟尘制取高纯Fe2O3粉的研究

Production of high purity fe_2o_3 powder from electric arc furnace dust

PSA制氧设备在电炉炼钢的应用

Application of PSA Oxygen Making Machine in Electric Furnace Steelmaking

针对复杂工业过程的特点，以电炉炼钢精炼连铸短流程生产线为研究对象，提出了变计时Petri网建模方法。

Aimed at the characteristic of the complex industrial process , time-varied Petri nets is advanced for steelmaking-refine-continuous casting .

电炉炼钢工艺中对Ca的成分有一定的要求，特别是微量Ca元素的快速炉前分析。

There is requirement to know the amounts of calcium in EAF steel-making process and fast analyzing trace calcium on time in front of furnace .

总结了宝钢电炉炼钢厂LF炉之温度行为。

The temperature behavior of the ladle furnace ( LF ) of EAF in Bao Steel is summarized .

从UHP电炉炼钢车间设计实践中总结三位一体结构优化的一些体会

Optimized three-in-one layout in the design of UHP electric arc furnace meltshop

本文探讨了利用电炉炼钢粉尘进行型煤燃烧固硫和烟道气脱硫的可能性，实验测定和理论计算了典型的电炉粉尘的硫容量约为5.5mmol／g；

The possibility of utilizing EAF dust as sul-fur sorbent in coal combustion was investigated . The sulfur capacity of the typical EAF dust is about 5 . 5 mmol / g.

在LD转炉炼钢取代了平炉炼钢的主导地位后，而今氧气转炉炼钢又面临电炉炼钢的竞争与挑战。

After taken the leading place of open-health furnace , oxygen LD converter is being faced with the challenge and competition of electric arc furnace .

利用模块化思想，以区段赋时弧有色Petri网为工具，说明了如何建立一个电炉炼钢连铸过程的实时调度模型。

Based on modular idea , how to establish the scheduling model of an electric arc furnace steelmaking continuous casting process by coloured Petri nets with interval timed arcs is specified .

电炉炼钢采用USTB氧气喷吹工艺的研究

Research of USTB Oxygen Injection Technology in EAF Steelmaking

获得的CO2气体保护焊的能源因子项与电炉炼钢工艺过程相关项有较好的相对可比性，这也表明该评估模型是合理的，并使得材料实现全寿命周期的定量评估成为可能。

The assessment model has been proved reasonable from the fact that power factorial item of CO_2 gas shielded arc welding shows good comparability with correlative item of steel-making process in electric oven , which makes it possible to quantitatively assess the whole life cycle of materials .

用这一新工艺处理硫酸渣可得到含TFe＝90.43%，铁金属化率达94.50%和铁回收率为90.94%的优质电炉炼钢用直接还原铁（DRI）。

The results show that DRI with total iron grade of 90.43 % , metallization of 94.50 % and iron recovery of 90.44 % could be obtained , DRI could be used as high quality source for electric furnace steelmaking .

现代电炉炼钢工艺及设备（2）

Modern electrical furnace steelmaking process and its equipment ( 2 )

感应电炉炼钢碳烧损的研究

Research of Carbon Loss of Steel Smelting in Induction Electric Furnace

全连铸电炉炼钢厂车间平面布置的选择

Layout Selecting of EAF Steel Plant with 100 % Continuous Casting

电炉炼钢作业计划的优化

The Optimum for the Plan of Production in Electric Steel making

电炉炼钢烟气特点及捕集净化措施

Smoke features and collecting and cleaning measures in electric furnace steel-making

一种新型转炉电炉炼钢优质原料

A New Qualified Raw Material for Converter & . EAF Steelmaking

电炉炼钢生产技术的发展与节能增效

Development of EAF steelmaking technology and energy saving and efficiency raising

关于电炉炼钢原料结构调整的探讨

Approach to Raw Material Composition Regulation Used in Electric Furnace Steelmaking

计算机辅助电炉炼钢工艺设计

Computer Assist Design in Technological Design for Electric Furnace Steelmaking

电炉炼钢用电极消耗浅析

Superficial view on the electrode consumption in electric furnace steel-making

电炉炼钢合金化优化计算及其决策分析

The Optimum Calculation and Decision Analysis for Alloying of Electric Furnace Steelmaking

新型脱氧剂碳化硅在电炉炼钢上的应用

Application of new deoxidizer SiC in electric arc furnace steelmaking

电炉炼钢烟尘净化技术探讨

Pilot study of dust collecting technique on electric steel-smelting smoke and dust

复合脱氧粉剂在电炉炼钢扩散脱氧中的应用

The application of powder complex deoxidizer to diffusion - deoxidation in steel-melting

电炉炼钢用各种煤氧枪发展述评

Development review of all kinds of oxygen-coal burner used for EAF steelmaking

珠江钢厂电炉炼钢散状原料准备

Preparation of the bulk raw materials for the meltshop of Zhujiang Steel