纺丝机

fǎnɡ sī jī
  • spinning machine
纺丝机纺丝机
  1. 高速纺丝机筒管夹紧装置的分析比较

    Comparison and Analysing about Bobbin Holder for High Speed Spinning Machine

  2. PC在国产高速纺丝机上的应用

    The application of PC on domestic high speed spinning machine

  3. 长丝纺丝机DCS控制系统

    DCS Control System of Spinning Machine for Long Filament

  4. FMS型小熔融纺丝机的研制

    Development of FMS type small melt - spinning machine

  5. 在中型湿法纺丝机上纺制了2h左右的腈纶纤维,不堵喷丝孔。

    PAN fiber was prepared by medium-sized spinning machine about 2h continuously .

  6. 艾玛NELSON连续纺丝机酸性丝的控制

    How to Control the Acid Yarn of ETMA NELSON Continuous Spinning System

  7. 常规POY纺丝机开发涤纶微细旦纤维条干均匀性探讨

    Yarn evenness of pet microfilament developed with normal POY spinning machine

  8. FDY纺丝机卷绕控制系统的设计

    The Winding Control System Design of FDY Spinning Machine

  9. 本公司在FDY纺丝机上成功地研制生产了一步法涤纶FDY、POY并网混纤丝。

    The one-step process of producing PET FDY-POY intermingled yam on FDY machine is introduced .

  10. 概述了功能齐全的FMS型小熔融纺丝机的研制过程,性能特征,结构特点及成品丝的物检分析。

    Developing process , properties charateristic , structure characteristic and finished fibre 's physics test of FMS type small melt-spinning machine with all function were presented briefly .

  11. 本文介绍一种应用MCGS组态软件的纺丝机断丝检测管理系统,描述了系统的设计和实现。

    This article introduces an application of MCGS configuration for yarn break inspect and manage system , describes the designing and achieving of the system .

  12. 给出了高速纺丝机卷绕张力控制器的三种设计方法:变参数PI控制、神经元自适应PID控制及神经元自适应PSD控制。

    Three methods for the design of tension controller in winding process of the high speed spinning machine are studied . They are variable parameter PI control , neuron adaptive PID control and neuron adaptive PSD control .

  13. 探讨了在常规POY纺丝机上开发涤纶微细旦纤维影响条干均匀性的因素。重点讨论了侧吹风、集束上油位置对细微旦纤维条干的影响。

    Factors that affect the yarn evenness of PET microfilament developed with normal POY spinning machine especially the lateral blow and gather oiling position were discussed .

  14. 通过增加特制的加热设备,在国产POY纺丝机上成功地开发了仿TCS工艺和涤纶全取向丝(FOY)。

    By the addition of special-made heating device , the polyester FOY is successfully produced on the domestic POY spinning machine with the new TCS technology .

  15. 本文研究了采用常规KV441高速纺丝机生产聚酯细旦POY的工艺技术特点。

    Characteristics of production technology of polyester fine denier POY produced by conventional KV441 high-speed spinning machine are studied .

  16. 介绍了希腊艾玛公司粘胶长丝NELSON连续纺丝机的水洗系统,并分析其成品产生酸性丝的原因及处理办法。

    Introducing the washing water system of NELSON viscose yarn spinning machines from ETMA company in Greece , and analyzing the exerting reasons of acid yarn and providing the methods of how to treat it .

  17. HSS高速连续粘胶长丝纺丝机是目前世界上最为先进的纺丝机种,本文较为详细地阐述了它的生产及工艺特点。

    Hss spinning machine is the high speed subsequently rayon filament spinning machine which is the most advanced spinning machine in the world . The composition mainly state the character-istics of the machine in the production and technique .

  18. 本文介绍了NOY高速纺丝机纺丝组件的结构特征,结合生产提出技术改造方案及其生产应用情况。

    The paper states the feature and technical innovation of the spinneret pack on NOY high speed spinning machine , as well as results of its application .

  19. 用高粘度聚酯切片和高分子量聚酰胺切片在自制的(?)20mm双螺杆复合纺丝机上纺制了锦/涤皮芯复合轮胎帘线。

    PA / PET sheath-core composite filaments for tyre cords are produced on the self-made 920 mm twin screw composite spinning machine from chips of high viscosity polyester and high molecular weight polyamide .

  20. HS401腈纶转向纺丝机是我国定型腈纶纺丝机,性能良好,在腈纶厂广泛应用。

    HS401 nylon reforming spinning machine is a kind of domestic standard one , with good performance and widely used in acrylonitrile production plant .

  21. 介绍了Barmag公司涤纶POY纺丝机联苯系统的工艺流程和运行中存在的问题,提出了3种改造方案,经比较后选择其一对联苯系统进行了改造。

    The process and remaining problems of dowtherm system for Barmag ′ s spinning machine of POY microfilament yarn were introduced . Compared three kinds of technical innovation methods , the technical innovation was carried out on dowtherm system .

  22. 主要改进是在标准静电纺丝机的喷丝头上增加了气流喷射系统。对喷丝头重新设计。

    A new spinneret combined a gas jet orifice was designed .

  23. 高速纺丝机筒管夹头的研究

    The research of bobbin chuck in high speed spinning machine

  24. 纺丝机筒子座组合件的调整与分析

    The adjustment and analysis of winder head bobbin holder of spinning machine

  25. 浅析熔融纺丝机变频调速系统

    Analysis of the frequency converting speed regulating system on melt spinning machine

  26. 提高化纤纺丝机计量泵安装精度的方法

    The Ways for Improving Mounting Accuracy of Metering Pump for Filature Machine

  27. KV461-4型复合长丝纺丝机的技术改造

    Reform of domestic kV 461-4 composite filaments spinning machine

  28. 活塞外侧形状的椭圆度柱塞式纺丝机的设计

    The Ellipticity of Piston Profile DESIGN OF PLUNGER SPINNER

  29. 纺丝机高精度牵伸控制系统设计

    Design of a spinning-machine high accuracy drawing control system

  30. 变频调速系统在涤纶两部位纺丝机上的应用

    Application of inverter speed regulating system in polyester spinning machine with two positions