络纱

luò shā
  • winding
络纱络纱
络纱[luò shā]
  1. 针织机和络纱机疵点检测设备GB/T15075-1994电子探针分析仪的检测方法

    Fault-detecting apparatus for knitting machines and winding machines Method for testing EPMA instrument

  2. 在机织和针织生产中,纱线准备的第一个工序是络纱。

    The first step in yarn preparation for both weaving and knitting is winding .

  3. 大豆11S球蛋白酶解产物及对肌原纤维混合蛋白特性的影响竹浆纤维/精梳棉/大豆蛋白纤维赛络纱的生产

    Properties and Effects of 11S Globulin Hydrolysates on Myofibrillar Protein Production of bamboo fiber / combed cotton / soybean protein fiber blended Siro yarn

  4. 1332M型络纱机工艺张力研究

    Study of Process and Yarn Tension on Model 1332 M Winder

  5. 21C型自动络筒机的络纱张力自动控制系统进行了深入分析,提出混合环控制是自动络筒机络纱张力控制系统的发展趋势。

    21C auto winder , based on which it claims that mixed loop control represents the development trend of tension control system on automatic winding machine .

  6. 络纱槽筒的特点及其发展

    Flooding in Vertical Tubes Features of the grooved drum and its development

  7. 在纱线然后会根据常规络纱评估。

    The yarns are then evaluated against conventional Sirospun yarns .

  8. 表面活性剂对亚麻纤维的损失率及络纱的影响

    The Surfactant has Influence on the Loss Rate of Linen Fibre and the Doffing

  9. 在络纱过程中,保持纱线捻度的不变是十分重要的。

    It is important that , during winding , no twist change take place .

  10. 竹浆纤维/精梳棉/大豆蛋白纤维赛络纱的生产

    Production of bamboo fiber / combed cotton / soybean protein fiber blended Siro yarn

  11. 络纱毛羽的测试与改善途径

    Measuring and Improving Ways of Winding Hairiness

  12. 络纱工艺断头自停装置的研制

    Development of stop motion for roving winding

  13. 自动络筒机络纱张力控制分析

    Analyse on tension controling for automatical winder

  14. 竹纤维赛络纱的纺制

    Spinning of Bamboo Fiber Siro Yarn

  15. 络纱筒管注射模设计

    Mould Design for Spooling Cone Pipe

  16. 络纱技术的发展

    The Development of Winding Technology

  17. 络纱毛羽测试分析

    Analysis of Spooling Hairiness

  18. 重点从赛络纱成纱强度及成纱毛羽两方面对影响赛络纱成纱质量的因素进行详细地分析。

    The factors of influencing siro-spun yarn quality were detailedly analysed from the aspects of yarn strength and hairiness .

  19. 与普通环锭纺单纱、赛络纱及紧密纱相比,紧密赛络纱突显其优越性。

    Compact siro spun yarn of cotton displays superiority compared with compact spinning , siro-spinning and ordinary ring spinning .

  20. 另外,在络纱机启动时,由于需要克服筒子的惯性,会产生较大的纱线张力。

    Also , upon start - up , higher tension are developed because the winder must overcome spool inertia .

  21. 另外在任何情况下,如果络纱机停车,应采取措施使筒子停止回转。

    Furthermore , provision must be made to stop the spool if , for any reason , the winder stops .

  22. 在毛衫生产中,络纱张力和上蜡工艺对纱线准备的影响尤其显著。

    During the produce of the sweater , the winding tension and waxing will have a remarkable effect on fabric quality .

  23. 在高速络纱时,由于惯性作用,筒子的回转会导致纱线张力的波动。

    At high winding speeds , due to inertia , the rotation of the spool may lead to tension variations in the yarn .

  24. 对确保合股无捻粗纱络纱过程线密度稳定及减轻工人劳动强度有重要意义。

    This is very important to ensure constant linear density of assembled roving in its winding process and reduce the labor intensity of operators .

  25. 络筒机在络纱时容易造成纱线长度长短不一,这将导致后续整经工序中纱线的巨大浪费。

    Winding frame silk would make the yarn unparallel in the course of winding which will result in great waste of yarn in later procedure .

  26. 阐述了亚麻粗纱煮漂工艺中表面活性剂对亚麻纤维损失率及络纱的影响。

    The paper expounded that the surfactant had influence on the loss rate of linen fibre and the doffing in linen roving kiering and bleaching .

  27. 回想一下在络纱过程中,往复导纱机构引导纱线沿着卷装往复一次,完成一个完整的循环。

    Recall that , in package winding , the traversing mechanism makes a full cycle in carrying the yarn completely back and forth along the package .

  28. 本文分析对比了二种络筒机络纱质量的差异,对粘胶纱在自动络筒机的工艺配置、纱线质量进行了测试与分析,提出了较为合理的络筒工艺。

    In this paper we compare the quality differences of yarn wound between these two types of machine , analyse the technique parameters and measure the respective winding quality .

  29. 试验研究结果表明:与普通环锭纺单纱、赛络纱及紧密纱相比,紧密赛络纱成纱毛羽明显减少,成纱强伸性能和条干得到了较好的改进,突显其优越性。

    The results showed that the Compact-Siro Spinning system can decrease yarn hairiness , improved yarn strength and elongation , regularity of yarn . It displays superiority compared with sirospun yarn , compact yarn and traditional ring-spun yarn .

  30. 对喷射纱生产中的毛羽产生的原因作了系统、详细的分析后得出,毛羽的产生是与原丝张力、浸润剂的润滑性、原丝烘干过程、络纱过程相关。

    Through systematic and detailed analyses for the causes of fuzz in gun roving production , it is concluded that the fuzz arising is related with strand tension , fiber size lubrication , cake drying and roving winding process .