钻削

基于Web的钻削过程仿真系统的研究

Study on Web Based Simulation System of Drilling Process

钻削类组合机床夹具交互式CAD系统

Interactive CAD system for tongs of drilling modular machine tools

基于ARM的嵌入式微孔振动钻削机床数控系统

A Embedded CNC System of Micro-hole Vibratory Drilling Machine Tool Based on ARM

多工位冲压模具设计基于PLC的多工位钻削加工控制系统

Design on the Processing Control System of Multi-work-location Drilling and Paring Based on PLC

Al2O3和C短纤维混杂增强铝基复合材料钻削加工性的研究

Investigation on drilling machinability of alumina and carbon short fibers reinforced aluminium alloy hybrid composites

SiCp/Al-MMCs的超声振动钻削力特性研究

Study on Ultrasonic Drilling Force Characteristics of SiC_p / Al-MMCs

超声振动钻削SiC颗粒增强铝基复合材料时的切削力研究

Cutting Force Research on Ultrasonic Vibration Drilling of SiC Particle Reinforced Aluminum-matrix Composites

DF深孔钻削系统加工质量的研究

Study on the machined quality with DF deep hole drilling system

外排屑深孔钻削DF系统的设计与研究

Design and study on outside chip removing DF system of deep-hole drilling

Al2O（3f）+Cf/ZL109混杂复合材料钻削加工性的研究

Investigation on drilling machinability of al_2o_ ( 3f ) + c_f / zl109 Hybrid Composites

碳纤维复合材料（CFRP）钻削加工技术的研究

Study on the Drilling Technology of CFRP

振动钻削Al2O（3f）+Cf／ZL109复合材料钻头磨损研究

Tool Wear in Vibration Drilling of Al_2O_ ( 3f ) + C_f / ZL109 Composites

低频振动钻削方式在DF系统中的应用

Application of Vibration Drilling in DF System

可加工陶瓷材料ZrO2/CePO4钻削刀具的磨损

Tool Wear in Drilling of Machinable Ceramics ZrO_2 / CePO_4

ZrO2/CePO4可加工陶瓷材料钻削加工的试验研究

Experimental Investigation on Drilling Process for Machinable ZrO_2 / CePO_4

采用通用计算流体力学软件FLUENT对深孔钻削中油路系统进行力学仿真。

The circuit system of deep-hole drilling is simulated using general purpose Computational Fluid Dynamics ( CFD ) code FLUENT .

高速钻削PCB时硬质合金钻头磨损经历初期磨损、正常磨损和剧烈磨损三个阶段。

Carbide drill wear during high-speed PCB drilling has three stages , the initial wear , normal wear and severe wear .

针对印刷电路板（PCB）钻孔加工的质量问题，对微钻头的设计和微孔钻削工艺进行了分析。

Aim at the quality problems in PCB drilling process , the design of micro-drill and the micro-drilling process were analyzed .

XYZ系列岩石钻头钻削力试验研究

Test research of drilling force for XYZ series rock bit

对外排屑深孔钻削DF系统的原理及装置进行了研究，对外排屑深孔钻削DF系统的参数选择及使用时注意事项进行系统地阐述。

The paper study the theory and equipment of outside chip removing DF system of deep-hole drilling .

ZrO2/CePO4复合陶瓷钻削试验中刀具磨损机理的研究

Study on Wear Mechanism of Twist Drill in Machining ZrO_2 / CePO_4 Composite Ceramics

BTA深孔钻削中扭曲现象的探讨

Research of the Twist Phenomenon in BTA - Deep Hole Drilling

考察了Al2O3短纤维和C短纤维含量、纤维位向、钻削速度及进给量对钻削力、刀具磨损和钻削精度的影响，并进行了分析。

The influences of quantity used in cutting and orientation of fiber on drilling force , tool wear and drilling precision were investigated , and the mechanism was analyzed .

FANUC数控系统在曲轴油孔钻削机床中的应用

The Application of FANUC CNC on Drilling Machine for the Crankshaft Oil Hole

由经验公式可以确定：对钻削力和扭矩影响最大的是钻头直径d，进给量f次之，切削速度v的影响最小。

Experiential formula indicates that the effect of the aiguille diameter on drilling force and torque moment is maximal , feed level takes second place and cutting speed is minimal .

采用改进Hopfield方法结合孔群加工的最优化目标函数进行钻削加工中心路径的优化。

Adopting an improved Hopfield algorithm and holes machining route optimization functions , the center route was optimized in drilling and cutting process .

指出了采用厚膜CVD金刚石钻头进行高速钻削加工是获得高质量孔的良好方法。

It is pointed out that the high speed drilling by using the thick film CVD diamond drill is a good method to get high quality holes .

针对钻削过程的特点，利用Deform软件建立了适于钻削过程的三维有限元模型。

Considered characteristic of drilling process and Deform software , the finite element model of three-dimension fit for drilling process is built .

开展了MQL技术在轴向振动钻削中的应用研究。

The research of application of MQL on vibration drilling has been developed .

成组钻削夹具利用了偏心钻套的偏心特性，V型可调滑块机构等实现了夹具上钻套位置的移动，可以对夹具孔系中心距进行精确调整。

It makes use of eccentricity characteristic of eccentricity axis sheath and V-shaped adjustable slide-block machine which actualize the motion of drilling sheath 's position on clamps and can adjust the hub distance of clamp holes .