侧压

cè yā
  • lateral pressure;side pressure;side compression;side thrust
侧压侧压
侧压[cè yā]
  1. 金属粉末压制过程侧压应力直接测试系统的研究

    Investigation on side pressure 's test mode of metal powder during compaction

  2. 锚索技术在侧压巷道中的应用

    Application of anchor cable technique in side pressure lane

  3. SP侧压过程板坯头部失宽的有限元分析

    FEM Analysis of Head Width Reduction of Slab during SP Side Pressing

  4. SP侧压过程中板坯变形的理论分析

    Theoretical analysis on plastic deformation of the slab being pressed by sizing press

  5. 脊髓腹侧压伤后前角神经元SDH、ACP活性变化

    Changes of SDH and ACP activities in spinal motoneurons after ventral cord compression in rabbits

  6. 薄板坯连铸液芯压下过程的数值模拟板坯SP调宽用新型侧压模块的研究

    Numerical Study of the Liquid Core Reduction for Thin Slab Continuous Casting Study on the New Sizing Press Anvil

  7. 本文在分析地应力的地质成因的基础上,还提出用岩体地应力的侧压比值K作为评价的准则。

    On the base of studying the geological origin , a lateral stress ratio K is also propsed in this paper as a criterion for evaluating the stability of these two zones .

  8. 同时在相同的入口空气流速和相对湿度下,换热器的制冷量Φ、翅片表面传热系数h和空气侧压降ΔP值随着结霜时间的进行是不断增大的。

    While at the same inlet air velocity and relative humidity , the cooling capacity of heat exchanger Φ, fin surface heat transfer coefficient h and the pressure drop Δ P values are constantly increasing with the frosting time increases .

  9. 方法:本实验采用机动镍钛器械Profile、手用不锈钢器械、声波及超声波器械预备80颗人单根管离体牙后,分别以传统侧压和热侧压充填根管。

    Methods : 80 extracted human teeth with single root were prepared using Profile rotary instruments , stainless steel ( SS ) RT hands files , shaper sonic files , ultrasonic K files and filled with traditional lateral condensation and warm gutta percha lateral condensation respectively .

  10. 根据发电机组计算机数据采集系统(DAS)烟气侧实时检测的烟气侧压差等参数,实现了300MW燃煤电站锅炉回转式空气预热器积灰状态的在线监测。

    On line ash monitoring of the rotary air heaters for a300MW coal fired utility boiler has been realized by processing the relevant operational data acquired from the DAS .

  11. 此时,SK型翅片管式换热器的制冷量Φ、翅片表面传热系数h、空气侧压降ΔP和COP值都随着入口空气流速和相对湿度的增大而增大。

    At this point , the cooling capacity Φ, the fin surface heat transfer coefficient h , the pressure drop Δ P values and the COP of the SK-type finned tube heat exchanger along with inlet air velocity and relative humidity increases increases .

  12. 使用Fortran语言编制计算程序,将结果与试验数据相比较,对混凝土峰前段的应力应变关系,恒侧压伸长与压缩条件下试验强度的模拟都得到了满意的结果。

    Moreover , comparing the results form calculation program compiled by Fortran computer language with the experimental data , the consequences of concrete stress-strain relationship of peak front-end and the simulation of tensile and compression strength under lateral pressure condition are satisfying .

  13. 建立了作用在排肥轴上的扭矩Te与箱内化肥侧压应力δx的关系。

    Having introduced arch formation theory of powdered fertilizer , we may determine the diameter of fertilizer ejection opening and establish a mathematical relationship between the torque Te acting on the shaft of fertilizer ejector and lateral compression stress δ x of the fertilizer contained in the fertilizer case .

  14. 方法应用小肠多点持续式灌注侧压研究10例全胃切除病人的Roux肠运动;核素显像测量小肠排空时间,并与12例B-Ⅱ式远端胃大部切除病人和7例正常人相比较。

    Method The intestinal motility and emptying were investigated in 10 patients who had undergone total gastrectomy and Roux-Y esophagojejunostomy ( with a water-perfused manometry and dynamic scintigraphic study ) compared with intestinal emptying of 12 Billroth - ⅱ subgastrectomy patients and 7 normal subjects .

  15. 首次对混凝土在侧压分别为0.25fc和0.50fc作用下进行了受拉疲劳试验,得到了S-N方程,应力应变曲线,应变、疲劳变形模量比与循环次数关系曲线。

    The tensile fatigue of concrete under a lateral pressure of 0.25f_c and 0.50f_c is achieved respectively , and some S-N equations , curves of stress-strain , relation between strain , the ratios of deformation modulus and the number of cycles which obeys three-stage rules are got accordingly .

  16. 在系统设备方面,本文运用CatiaV5的有限元分析功能,对系统中的核心设备&辊压机的侧压板和压辊轴等关键部件进行了优化分析,并提出优化改进方案。

    On equipments of system , this paper , making use of the finite element analysis function of CATIA V5 , make Optimization analysis of the key components of the core equipments in the system , such as the side platen and the roller axis , and bring optimization Solutions .

  17. 氯仿牙胶糊剂、自产根管封闭剂其根尖封闭效能与AH26、AH-plus相同;直根管充填侧压法优于垂直法。

    The apex blocking efficacy of chloroform gutta percha paste and self made root canal blocking agent is equivalent to that of AH-plus and AH 26 . The lateral pressure way is superior to the vertical pressure way .

  18. 钻孔灌注桩桩端桩侧压浆新工艺的应用

    A New Method Used for Bored Pile End and Sides Grouting

  19. 钢丝铠装抗侧压性能优良,并具有防弹能力。

    Wire-side pressure Armored excellent performance , and a bullet-proof capability .

  20. 定侧压混凝土双轴压疲劳性能研究

    Behavior of concrete under compressive fatigue loading with constant lateral stress

  21. 攻角动态变化的侧压式进气道风洞实验

    Wind tunnel experiment of sidewall compression inlet with adjustable attack angle

  22. 散体中侧压系数的理论分析与计算

    Theoretical analysis and calculation of lateral pressure coefficient in granular materials

  23. 单向恒定侧压下混凝土动态抗压特性试验研究

    Experimental study on dynamic properties of concrete with one-dimensional confining pressure

  24. VC443A拉伸机的侧压系统改造

    Reform of draw-point control system in VC 443a type drawing machine

  25. 软填料密封侧压系数分析

    The Lateral Pressure Coefficient in a Soft - packed Stuffing Seal

  26. 侧压过程板坯温度变化的研究与分析

    Studying and Analyzing of Temperature Change during Slab Siding Press

  27. 高超侧压进气道前/后掠的数值分析和比较

    Calculation and comparison of forward / backward swept sidewall compression scramjet inlets

  28. 密封填料侧压系数的确定

    Determination of coefficient of lateral pressure upon the gland packing

  29. 连铸板坯大侧压不对称变形有限元分析

    FEM analysis of asymmetrical deformation with width reduction for continuously casting slab

  30. 考察了不同侧压应力水平下试件的破坏形态和试件表面裂缝分布及走向特征。

    The failure modes and superficial cracking characteristics of specimens are reported .