冷轧板

  • 网络cold-rolled sheet;cold rolled plate;cold rolled steel;SpCC
冷轧板冷轧板
  1. 提高SPCC冷轧板断后延伸率的研究

    Study on Improving the Elongation of SPCC Cold Rolled Plate

  2. 冷轧板厚度的自动控制

    Automatic Control of Cold Rolled Plate Thickness

  3. 四辊冷轧板带轧机液压AGC系统数学模型

    Mathematical Model of Four-high Cold Mill Hydraulic AGC System

  4. CSP生产条件下冷轧板退火织构的实验研究

    Experiment Study of Annealing Texture of Cold Rolled Sheet in CSP Process

  5. 再结晶退火对Ni(47)Ti(44)Nb9合金冷轧板相组成及板材织构的影响

    Effect of Recrystallization Annealing on Constitutional Phases and Texture of Cold-rolled Ni_ ( 47 ) Ti_ ( 44 ) Nb_9 Sheet

  6. 以CSP热轧板生产的冷轧板表面缺陷主要是孔洞和翘皮缺陷,缺陷主要是由夹杂物引起的。

    The surface defects of CSP sheets are mainly holes and blisters and these defects are caused by inclusions too .

  7. Ti-IF钢冷轧板罩式退火工艺研究

    Study on Batch Annealing Process of Ti-IF Steel Cold Rolled Sheet

  8. 用晶体取向分布函数(ODF)研究了Zr-4合金冷轧板的退火织构。

    The annealing texture of Zr-4 alloy cold rolling plate is studied with the crystal orientation distribution function ( ODF ) .

  9. 退火工艺对CSP基板DDQ冷轧板深冲性能的影响

    Effect of Annealing Technology on Deep-drawing Property of DDQ Cold Sheets Rolled with CSP Hot Strips

  10. 冷轧板1145铝化学镀Ni-Fe-P合金工艺的研究

    Study on the Process of Electroless Plating Ni-Fe-P Alloy for Cold-rolling Plate 1145 Aluminum

  11. 通过对3104铝合金冷轧板的三维取向分布函数(ODF)的测算,研究和分析了该材料的织构类型与分布规律。

    The textures types and distribution rule of 3104 aluminium alloy during cold rolling has been investigated by means of orientation distribution functions .

  12. 在相同的钢种和板厚条件下,邯钢CSP热轧板卷生产的冷轧板缺陷率比传统工艺热轧板卷生产的冷轧板缺陷率高62%。

    For the same steel grades and the same thickness of slab the defects of sheets produced by CSP hot strip is 60 % higher than that produced by conventional hot strip .

  13. 采用ODF分析方法对IF钢冷轧板在退火过程中织构变化进行了分析。

    By means of ODF ( Orientation Distribution Function ) analysis , the de-velopment of texture during annealing has been investigated in cold rolled IF steel sheet .

  14. EBNER公司出产的冷轧板卷退火炉

    Annealing furnaces of cold finished sheet in coils produced by Ebner

  15. 在2~3mm厚的不锈钢板的市场上,廉价的不锈钢热轧板开始与冷轧板竞争。

    In stainless steel market the cheaper hot rolled sheet has started to compete with cold rolled material in 2-3 mm gauges .

  16. 介绍了在实验室模拟实际CSP轧制工艺条件生产的冷轧板,经不同退火工艺处理后,试样不同厚度位置处其{100}及{111}织构的变化情况。

    The experiment showed that , under the same rolling condition and different annealing parameters , the { 100 } and { 111 } texture were varied at the positions across the strip thickness .

  17. 采用OM、TEM、SEM、硬度测量、超塑拉伸试验等手段研究了冷轧板和冷旋管的退火行为与再结晶组织,以及在480~540℃,8×10-4s-1条件下的超塑性变形与断裂行为。

    Annealing process , recrystallized microstructures and superplastic deforming and fracturing behaviors of the cold-rolled sheet and cold-spun pipe were studied by means of OM , TEM , SEM , hardness measure and superplastic tensile test .

  18. 宝钢冷轧板形控制采用CVC技术,在板形缺陷识别方面存在一些问题。为此,开展了冷轧板形缺陷识别中采用人工神经网络的研究工作。

    There exist some problems in CVC technology adopted in the shape control of cold rolled sheet in Bao Steel , therefore , the research on the artificial nervous net has been carried out .

  19. 通过拉伸、宏观织构、FLD等实验,测试并比较了SPCD和SPCE冷轧板的成形性能。

    The forming properties of SPCD AND SPCE cold-rolled sheet are tested and compared through experiments such as drawing , macrostructure and FLD .

  20. 在ST12冷轧板上用线切割加工出不同深度的狭缝来模拟钢板中缝类缺陷。

    Slots with different depth were made by WEDM in metal sheet of ST12 to simulate slot-type defects .

  21. 实验结果表明,除各向异性指数外,SPCE冷轧板的成形性能均优于SPCD。

    It is showed from the result that the forming property of SPCE is better than that of SPCD except anisotropy index .

  22. 在实验室条件下,研究了罩式退火工艺对SPCC-SD冷轧板组织和性能的影响。

    The effect of batch annealing process on the microstructure and mechanical properties of SPCCSD cold rolled steel sheet was studied under laboratory conditions .

  23. 低碳铝镇静钢(LCAK)常用于生产冷轧板,要求铸坯有高的洁净度。

    High cleanliness is required for low carbon aluminum killed ( LCAK for short ) steel which is widely used for production of cold rolled sheet .

  24. 因该机床中70%以上的零部件均采用2.5~3mm冷轧板冲压成形制造,故机床制造简单、重量轻及互换性强,因此该结构的木工多用机床具有广阔的推广应用前景。

    More 70 % parts of the machine tool were made of 2.5 ~ 3mm cold rolled steel plate shaped , so the machine tool was simple in production , light in weight , good in exchangeability , and has a brilliant prospects .

  25. 探讨冷轧板钢(LZ06)和20号钢在连铸过程中钢液的二次氧化现象和防止措施。

    This paper discusses the reoxidation of the cold-rolling sheet steel ( LZ06 ) and 20 # steel during the process of continuous casting and the protective measure from reoxidation .

  26. 试验结果表明,在再结晶的低温区(580~620℃)退火和采用双台阶退火,SPCC-SD冷轧板均具有较细的铁素体晶粒、较高的屈服强度和抗拉强度。

    The results show that SPCC-SD cold rolled steel sheet can obtain refined ferrite grain and exhibit higher yield strength and tensile strength when annealed at recrystallization low temperature zone ( 580 ~ 620 ℃) and applied double steps annealing .

  27. 研究了≤0.005%C-2.5%~2.8%Si的2.5mm热轧电工钢板在850~1100℃常化对0.5mm冷轧板880℃+950℃退火后组织和磁性能的影响。

    The effect of 2.5 mm hot rolled plate of electric steel (≤ 0.005 % C-2.5 % - 2.8 % Si ) normalizing at 850-1 100 ℃ on structure and magnetic properties of 0.5 mm cold rolled sheet annealed at 880 ℃ + 950 ℃ has been studied .

  28. 基于神经网络的冷轧板带平直度控制研究

    The Cold Rolling Strip Flatness Controlling Research Based on Neural Networks

  29. 张力对冷轧板带变形的影响

    Influence of tension on the deformation of strip during cold rolling

  30. 无间隙原子钢冷轧板织构的快速检测

    Rapid Measurement of Texture for Cold Rolling Interstitial Free Steel Sheets