刚性

gāng xìng
  • rigidity;stiffness;inflexibility;strong character
刚性刚性
刚性 [gāng xìng]
  • [stiffness] [物体]坚硬不易变形的性质

  • [strong character] 刚强不屈的性格

  • 一个男子汉应该有刚性

刚性[gāng xìng]
  1. 同时证明了等度连续性(一致刚性)在f,f~,-f之间的等价性。

    The equivalence of equicontinuity ( uniform rigidity respectively ) among f , f , and f is also proved .

  2. 结果认为纳米PP复合材料具有更好的刚性,保持了良好的低温冲击性。

    The results show that composites of nano particle and PP have good rigidity and impact property under low temperatur .

  3. 强度:自动差速齿轮,滚子轴承上的刚性车轴。

    RUGGEDNESS . Automotive ring gear differential . Axle shafts on roller bearings .

  4. 湿地推土机系半刚性悬挂、液力传动、液压操纵的履带推土机。

    TYS165-2 bulldozer is semi-rigid suspended , power shift , hydraulically controlled and track type . TYS165-2

  5. 作为DNA嵌入剂,它们一般都具有平面刚性结构和大共轭π键。

    They generally consist of a flat , rigid and large conjugated aromatic structure .

  6. 直角平面区域内固定圆形刚性夹杂问题的Green函数解

    The anti plane Green function solution of the problem of a fixed rigid circular inclusion in right-angle plane

  7. N层半无限弹性体在刚性圆板压缩下的力学计算

    Calculation of stresses , strains and Displacements in a N-layered Semi-Infinite Elastic System Compressed by Rigid Circular plate

  8. 刚性无机填料增韧PP

    Toughening of PP by Rigid Inorganic Filler

  9. 目的探索在PC平台上实现腹部CT及MRI图像非刚性融合配准,讨论其为临床提供新的诊断信息的应用价值。

    Purpose To provide new diagnose information for clinician by exploring the abdomen CT and MRI image nonrigid fusion technique .

  10. 高频焊接H型钢具有宽肢薄腹构件的特征,其强轴方向具较强的抗侧能力,形成刚性框架。

    The high frequency welding H-section steel has properties of broad and thin section component . Its higher axial lateral resistance capacity forms rigid frame .

  11. MTS数字程控伺服岩石刚性试验机功能开发

    On the function development of MTS program-controlled rock stiff test machine

  12. CaCO3刚性粒子增韧HDPE及其增韧机理

    CaCO_3 Rigid Particles Toughened HDPE and the Toughening Mechanisms

  13. 成核剂的加入,不但改善了PP的光学性能,而且提高了PP的刚性,在某种程度上改善了其加工性能。

    Not only the optical property but also the rigidity of homopolymerized PP is improved by adding nucleating agent , and the processing performance is improved .

  14. 治疗组全血黏度低切变率、高切变率及红细胞刚性指数与治疗前比较有显著性差异(P0.05)。

    The level of whole blood viscocity low shear rate , high shear rate and erythrocyte rigidity index significantly changed compared with those before treatment ( P0.05 ) .

  15. 机械特性聚醚醚酮PEEK具有刚性和柔性,特别是对交变应力下的抗疲劳性非常突出,可与合金材料相媲美。

    Mechanical properties PEEK PEEK has rigid and flexible , especially for alternating stress of fatigue resistance is very outstanding , but and alloy material comparable .

  16. 目前,CFG桩复合地基沉降计算方法、固结度计算方法还不成熟,已有的研究成果大多集中在刚性基础下的试验、计算方面。

    But the computational methodology of settlement and consolidation degree needs improving . Recent research mainly centered on the aspects of test and computation of CFG-pile composite under rigid base .

  17. 合成了既含聚乙二醇醚(PEG)柔性链、又含刚性液晶结构单元的活性增韧促进剂(LCEUPEG),对其促进环氧树脂/双氰双胺体系的固化反应活性、反应机制;

    A series of reactive toughening accelerators ( LCEU PEG ) containing both the flexible chain and rigid chain liquid crystal unit were synthesized and used to toughen the epoxy resin / dicyandiamide curing system .

  18. 对刚性约束的非线性动力系统进行研究,得到了该动力系统周期运动稳定性分析的Floquet特征乘子计算的半解析法。

    A semi-analytic calculation method of Floquet multipliers is presented for the stability analysis of periodic motions in nonlinear dynamic systems with rigid constraints .

  19. 首先利用Forstner算子提取对应图像的解剖标记点,并作初始的图像刚性变换。

    Anatomical landmarks are extracted by the image geometry feature operator introduced by Forstner .

  20. 采用满足边界条件的试函数方法,利用QR法计算得到刚性悬挂接触网的固有频率及相应的特征向量。

    The inherent frequency and the corresponding eigenvector , that is to say , the mode function is solved with the method of the trying function that is fit to the condition of the boundary .

  21. 差分方程隐式部分采用了LU-SGS方法以避免矩阵运算,对化学反应和振动能量源项采用预处理矩阵以解决刚性问题。

    The LU-SGS method is used in implicit part of the difference scheme to avoid matrix operations . The preconditioning technique is used for solving stiffness problem .

  22. 数值试验结果表明,RTFHM对线性和非线性的非刚性延迟微分方程都是有效的。

    Numerical experiments show that RTFHM is efficient for solving linear and nonlinear non-stiff delay differential equations .

  23. 利用Hankel变换及矩阵理论,获得了位于水平刚性基础上的弹性层在其内部受垂直于边界的集中力作用下的精确解,推广了已有的结论。

    In this paper , an exact solution of an elastic layer on a rigid foundation subjected to an internal concentrated force perpendicular to the boundary is obtained by the use of the Hankel transform and matrix theory .

  24. 用刚性无机粒子硅-铝(Si-Al)空心球填充增强聚丙烯(PP),研究了Si-Al空心球的含量、粒径及偶联剂对PP/Si-Al空心球增强材料力学性能的影响。

    This paper investigated the effect of the content of the cenosphere , the particle size and the coupling agent on the mechanical properties of Si-Al cenosphere / PP reinforcing materials , and PP is reinforced by the Si-Al cenosphere .

  25. 从而为进一步深入研究落锤式弯沉仪(FWD)在各种路基、路面(刚性路面,柔性路面和复合式路面)以及建筑物地基的结构承载能力评价提供基础。

    Therefore practical and versatile analysis access is established for the Falling Weight Deflectometer ( FWD ) on evaluation of capacity of pavement ( subgrade , rigid pavement , flexible pavement and composed pavement ) and foundation of structures .

  26. 端胺基聚氨酯(ATPU)是一种新型的环氧树脂固化剂,它含有刚性单元和柔性链,能同时增强、增韧环氧树脂;

    Poly ( ethylene glycol ) - based amino-terminated polyurethane ( ATPU ) is a novel kind of flexible curing agent of epoxy resin , containing both flexible chains and rigid groups .

  27. 对比了各种传动方式,认为采用柔性与刚性相结合的传动方案,可使抽油机获得5~8m的冲程,是提高泵效和降低电机功率的有效途径。

    Through comparing different driving schemes , a structure that combines wrapping connector driving with rigid driving is adopted to obtain a 5 to 8 meter long stroke , thus may increase the efficiency of pump and decrease driving motor power at the same time .

  28. 应用现代螺旋桨升力面元方法计算冲压空气涡轮的气动性能,叶片采用单层涡模型,尾涡采用与Goldstein假设一致的刚性尾涡,将螺旋马蹄尾涡视为开口涡环以便于编程。

    The modern propeller lifting surface method has been applied to calculating the performance of Ram Air Turbine , and a single layer vortex model is adapted to the blade , the wake is modeled to rigid cylinder wake coincided with Goldstein hypothesis .

  29. 非线性油膜力数据库方法获得非圆滑动轴承的非线性油膜力,利用Runge-Kutta法、Poincaré映射和频谱图对刚性Jeffcott转子&椭圆轴承系统在较宽参数范围内的分叉和非线性动力学行为进行研究。

    The nonlinear dynamic bifurcation behavior of a rigid Jeffcott rotor-non-circular bearing system was investigated in a wide rang of parameters based with the help of Runge-Kutta method , Poincar é map and frequency spectrum . The journal bearing oil film forces were obtained from database .

  30. 但对于冲压成型壁厚仅为2mm的钛圆盘,由于钛塑性好、刚性差,冲压后产生飞边,后续工序困难。

    But for the titanium round disk with 2 mm in thickness , because of its excellent plasticity and bad rigidity character , the crease after compress is very difficult to remove , and it is difficulty to fix on center in the following process .