压铸

yā zhù
  • die-casting;diecast;pressure casting;striking
压铸压铸
压铸[yā zhù]
  1. 压铸模套板的壁厚校核

    Wall Thickness Checking of Sleeve Plate for Pressure Casting Die

  2. 浅析差压铸造件粘砂机理及解决措施

    Mechanism and Solution of Bonded Sand in Differential Pressure Casting

  3. 基于产品约束模板的压铸模参数化CAD系统

    Product constraint template based parametric CAD system of casting die

  4. 基于PRO/E的压铸模具CAD系统开发

    Development of CAD System of Die-casting Mould Based on Pro / Engineer Software

  5. 压铸模CAD系统的研究

    Study on the CAD System of Die Casting Die

  6. 铝合金压铸模CAD技术

    The CAD Technology of Diecasting Mould for Aluminum Alloys

  7. 基于DSP的压铸机电控系统设计

    A Circuit Control System Based on DSP for Die-casting Machine

  8. 基于PLC和触摸屏技术的压铸机控制系统研究

    The Research of the Die-casting Control System with PLC and Screen Touching Technology

  9. 压铸模CAD系统斜销抽芯机构模块分析

    Analysis on the Module of Bevel Pin Core Pulling Mechanism of Die-casting Die CAD System

  10. 压铸模CAD系统开发

    The Development of Die-casting Dies CAD System

  11. P变质对不同冷速下过共晶压铸铝合金初晶Si的影响

    Effects of P Modification on Primary Si in Hypereutectic Al-Si Die Casting Alloy with Different Cooling Rates

  12. AutoCAD环境下压铸模浇注系统设计

    Design of Runner System of Diecasting Mould in the AutoCAD Environment

  13. 压铸态SiCw/6061Al复合材料中弹性模量的不均匀性

    Inhomogeneity of Elastic Modulus in the SiC_w / 6061Al Composites as Squeeze Cast

  14. SiCp/ZL102复合材料压铸工艺试验

    Study on Die-casting Process of SiC_p / ZL102 Composite

  15. 解决厚壁95%Al2O3瓷在热压铸生产线存在的问题

    To Solve the Problem Existing in the Production Line of Hot Injection

  16. 压铸SiCW/6061Al复合材料中晶须取向分布与热残余应力

    Whisker Orientation and Distribution of Residual Stress in Squeeze Casting SiC_W / 6061A1 Composites

  17. 基于ADAMS的热室压铸机机铰优化设计

    Optimization design of hot chamber die casting machine based on ADAMS

  18. 压铸条件对Al-Si合金组织中Fe相形态的影响

    Influence of Die Casting Condition on the Morphologies of Iron Compounds in Al-Si Alloy

  19. 基于数据库的三维压铸型BOM自动设计系统

    BOM Auto Design System of 3D Die-casting Die Based on Database

  20. 基于UG平台的压铸模CAD/CAM系统设计与实践

    Design and Practice of Casting Die CAD / CAM System Based on UG

  21. 根据国外发展压铸模CAD/CAM的经验和我国的具体情况提出了发展压铸模CAD/CAM的建议。

    The suggestions of developing die casting die CAD / CAM are offered , according to external experience and internal concrete conditions .

  22. 基于CAE分析的电脑外壳压铸模浇注系统的设计

    Design of Gating System for Die Casting die of Magnesium Computer House Part Based on CAE Analysis

  23. 目标压铸厂总体上OK,尽管总是时不时的重犯一些化学成分和气孔的问题。

    Target 's die castings have been generally okay , although there have been some issues with chemistry and porosity that have recurred from time to time .

  24. 以莫来石&刚玉质瓷为材质,采用多熟料配方和热压铸成型方法制备SHF陶瓷衬垫。

    SHF ceramic lining is produced based on the material of mullite corundumporcelain by the method of multi-filler formula and hot-press casting .

  25. 制备了SiO2Al2O3K2ONa2O系可压铸玻璃陶瓷,采用X射线和SEM等方法对材料的结构和物理性能进行了测试和分析。

    The die-cast glass ceramics in SiO_2-Al_2O_3-K_2O-Na_2O system were prepared in this study . The structure and physical property were tested and analyzed by using XRD and SEM .

  26. 本文深入分析了用压铸法制造SiCw/Al复合材料过程中液态铝渗入SiC晶须预制块中的渗透过程。

    The infiltration processes of melt aluminium alloy into SiC whisker preform were analyzed during the fabrication of SiCw / Al composite by squeeze casting method .

  27. 通过对普通压铸件和真空压铸件的X-Ray检测比较表明:使用本课题研制的真空压铸辅助系统生产的真空压铸件的气孔缺陷明显减少。

    The comparison with the ordinary die-casting casting and the vacuum die-casting casting X-Ray detection showed that there is less air trap defect in casting produced by the self-development system obviously .

  28. 多输入/多输出GA-BP网络压铸工艺参数设计系统

    Die-Casting Process Parameters Design System Based on a Multi-Input / Multi-Output GA-BP Neural Network

  29. Acheson自动喷涂机在B5发电机支架压铸生产中的应用

    Application of Acheson Automatic Sprayer in Production of Support of Model B5 Engine

  30. 基底瓷与饰瓷的厚度比对IpsEmpressⅡ热压铸陶瓷抗弯强度的影响

    Effect of core ∶ dentin thickness ratio on the flexure strength of IPS Empress ⅱ heat-pressed all-ceramic restorative material