固化条件

通过进一步对胶粘剂的固化条件、耐介质性能及耐湿热老化性能的考查，说明J-200-1D胶粘剂具有优异的工艺性能及耐候性能。

The tests of curing condition , resistance to medium and hydrothermal ageing showed that the J-200-1D adhesive has excellent processing properties and resistance to weathering .

聚氨酯粉末涂料的制备与固化条件的研究

Study on the Production and Curing Condition of Polyurethane Powder Coatings

用DTA法对环氧树脂固化条件的研究

Study of epoxy resin solidification conditions by using DTA method

详细介绍了移印的承印材料、UV移印工艺的特点、UV固化条件、油墨调整、印刷要素等UV移印油墨的应用知识。

It also introduces the application knowledge on substrate , process , UV curing , ink matching for pad printing .

用差热分析（DTA）法对环氧树脂固化条件的研究

Study on Epoxy Resin Solidification Conditions by DTA

应用该固化条件，所制备的铜导电浆料导电性能良好，电阻率≤4.7×10-3Ω·cm。

Under these curing conditions , the conductive performance of the copper paste is good , as the resistivity ≤ 4.7 × 10-3 · cm .

而在60℃加热1h的固化条件下，玻璃鳞片的含量对涂层的硬度无显著影响。

The percentage of addition of the glass flake has no evident effect on the coating hardness under the heating condition of 60 ℃ curing for 1 h.

采用DSC进行卷材涂料热分析研究，测试在不同PMT（最高金属板温）下漆膜的Tg，以确定各种卷材涂料的最佳固化条件。

Coil coatings was thermal analyzed and researched with DSC in order to test glass transition temperature ( Tg ) of the paint film at the maximum precoated metal temperature ( PMT ) and determine the optimal curing conditions of different coil coatings .

通过对液态低聚物辐射固化条件和SDS-II型曝光机的加速电压、曝光剂量等曝光参数的分析研究，得出SDS-II型曝光机可以用于液态低聚物辐射固化的结论。

Based on the studies of oligomer curing conditions and accelerating voltage , exposure dose of SDS-II electron beam exposure system , a conclusion is achieved that SDS-II is suitable for curing oligomer .

介绍了J-125改性环氧结构胶膜的基本组成和固化条件，并讨论了各组成及固化参数对胶粘剂力学性能的影响。

Basic compositions and cure condition of J-125 modified epoxy structural film adhesive are introduced in the paper , influences of each composition and cure parameters on the adhesive properties are discussed .

在不同固化条件下其性能有明显变化。

And the properties of polybenzoxazine were different with various curing condition .

固化条件对改性环氧树脂混凝土中橡胶分散相形态的影响

Effect of solidification condition on pattern of rubber domain in modified epoxy concrete

讨论了不同多元醇、不同氨基树脂和固化条件等因素对漆膜性能的影响。

Effects of each component and curing condition on paint properties were discussed .

用动态力学性能分析仪考察了树脂的固化条件。

The curing condition of the resin was determined by the torsional braid analysis .

固化条件对CR/MMA接枝胶剥离强度的影响

Effects of Curing Conditions on the Peeling Strength of CR / MMA Graft Adhesive

氨基醇酸树脂的研究&Ⅱ固化条件对力学性能的影响

Study of the amino-alkyd resin part ⅱ: effects of curing conditions on mechanical properties

铅酸蓄电池固化条件的研究

Study on plate curing of lead-acid batteries

考察了固化条件、底材表面处理对涂层性能的影响。

The influences of curing condition and substrate surface treatment on coating properties were investigated .

生极板固化条件对极板质量的影响

The effect of curing conditions for green plates on the quality of lead-acid battery plates

重点讨论了不同EMA/ETM配比和固化条件等因素对烘漆性能（特别是耐热性）的影响。

Effects of the ratio of components and the curing condition on their properties were discussed .

固化条件对AISI304不锈钢粉末固化材的显微组织和力学性能的影响

The Effect of Consolidation Condition on the Structure and Mechanical Properties of AISI 304 Powder Material

介绍了水性丙烯酸涂料的设计思路、生产工艺、施工固化条件。

The formulation design , production technology , and curing conditions of the water-borne acrylic coatings are introduced .

重点讨论了不同原料组分及配比和固化条件等因素对漆膜性能的影响。

Effects of each component , the ratio of components and curing conditions on their properties were discussed .

介绍了各种粉末涂料的使用特点、涂装工艺、固化条件、涂层性能及影响因素。

The application characteristics , finishing technology , curing schedule , film properties , and the affecting factors were discussed .

初步研究了几种封闭剂对异氰酸酯基团的封闭率及对所制成单组分聚氨酯胶粘剂的热固化条件和贮存稳定性的影响。

The effects of several blocking agents on the blocking ratio of isocyanate group ( - NCO ) are studied .

低温固化条件下黏接强度低，断面较平整；

When cured at temperatures below 80 ℃ , the bonding shear strengths were low and smooth fracture surfaces were observed .

此结果对于选择磁带涂布的固化条件有一定意义。

These results can be used as reference data for the selection of curing conditions in the coating technology of magnetic tapes .

对W/O型不饱和聚酯树脂乳状液的固化条件进行了研究，并对乳状液的固化机理进行了探讨。

The curing conditions of unsaturated polyester W / O type emulsion were studied and the polymerization mechanism of the emulsion was investigated .

本文讨论了消光剂、配方组成、施工和固化条件等对100%UV固化涂料光泽的影响。

The influence of matting agents , formulation , and application and curing schedule on gloss of 100 % UV curing coatings is discussed .

分析了偶联剂、镀覆金属、漆膜厚度及固化条件对导电涂料的导电性能的影响；

Influence of coupling agent , coating metal , film thickness , and curing schedule on the performance of electromagnetic shielding paint is analyzed .