增压器

基于ARM的嵌入式增压器测试系统

Testing System of Embedded Supercharger Based on ARM

大众汽车公司的机械式G型增压器

Volkswagen 's G Type Mechanical Supercharger

基于PWM方式的变几何涡轮增压器可调喷嘴气动执行机构

Pneumatic Actuating Mechanism for Variable Nozzle of VGT Based on PWM

涡轮增压器主要零部件的模态计算及压气机CFD分析

The Mode Analysis of Turbo-charger ' Blades and CFD Analysis of Compresser

柴油机NOx排放测试在柴油机与增压器优化匹配中的应用

Application of NOx Emission Measurement in Optimized Matching of Diesel Engines and Turbochargers

涡轮增压器监控系统与PIC单片机的串行通讯

Serial Communication for Turbocharger Monitor System to PIC Electronic Control Unit

加藤NK系列汽车起重机用自动蓄能系统共有5种型式：Ⅰ型系统用增压器供油，各路供油比为1：2：1，蓄能压力与操作工况有关，用液控卸荷阀保持最小蓄能压力。

There are five types of automatic accumulation systems for Kato NK series truck cranes .

基于PIC单片机的变喷嘴涡轮增压器电控系统设计

Development of New Variable Nozzle Turbocharger Electronic Control System Based on PIC Microprocessor

DF（4C）型内燃机车增压器机油压力低故障分析及处理

Analysis on the Low Machine Oil Pressure Fault of DF_4 Type Diesel Locomotive Turbocharger

利用现代CAD技术建立了轴向后弯式增压器涡轮的实体模型，并用有限元法对其进行变结构模态特性研究，给出了不同截面叶片的曲面建模方法。

The solid models of axial back swept turbines are established by means of advanced CAD techniques and the finite element method is used in studying their modal characteristics .

KY公司是一家专营涡轮增压器的民营企业。

KY Corporation is one civilian-run enterprise which monopolizes turbochargers .

VTR废气涡轮增压器涡壳漏水的原因及其对策分析

Causes of Shell Leakage in VTR Exhaust-driven Turbocharger and Countermeasures

这是霍尔塞特公司和无锡动力工程有限公司的一个合资企业。霍尔塞特无锡公司的MR涡轮增压器在中国市场占有领先地位，有很大的客户群，其中包括了中国主要的卡车制造商。

This is a joint venture between HOlset Turbochargers and Wuxi Power Engineering Co. Ltd. Wuxi Holset enjoys a leading position in MR turbos in the Chinese turbocharger market and serve an extensive customer base including leading Chinese truck manufacturers .

DF（8B）型机车增压器机油滤清器滤芯清洗工艺及试验设备

Cleaning process and test equipment for lubricating oil filter core of turbocharger of DF_ ( 8B ) diesel locomotive

可变几何废气涡轮增压器（VGT）的控制系统研究

Study on Control System for Variable Geometry Turbocharger

采用高频感应加热快速熔炼、低模壳温度稳速浇注工艺铸造出一批TiAl增压器涡轮。

A novel method was employed to cast TiAl turbocharger wheels with vacuum high frequency induction heating , low temperature of mold shell and smoothly filling .

实验结果表明，以现有涡轮增压器产品充当涡轮制冷器时，在货车发动机常用工况下，空调装置可提供低于环境温度6℃的冷气；Air（初三适用）

The test results indicate that , when now available turbine superchargers are used as turbine refrigerators , the new air-conditioning device can provide conditioned air with the temperature being 6 ℃ less than the environmental temperature as the truck engine operates in normal condition .

NZP陶瓷增压器蜗壳隔热管的研制

Preparation of NZP ceramic insulate-thermal tube

本文介绍了德国大众汽车公司设计、生产的采用螺旋推进压气原理工作的G型增压器，对其原理、结构及应用作了详细的分析说明。

G-type supercharger designed and manufactured by Volkswagen Motor Company , based on the spiral compression principle is described in the paper . Its working principle , structure and application to supercharging of automotive engine are illustrated and discussed in detail .

本文简要介绍美国热力学系统（TMS）公司开发的三级涡轮增压器系统的设计、高空模拟试验和飞行试验等。

The paper presents briefly the designing , high altitude simulating test and flying test of three-level turbocompressor system developed by America TMS company .

ZY-1型增压器转速检测仪

ZY-1 speed detectors for turbochargers

介绍了多台增压器相继增压系统的工作原理及系统组成，并建立了某船用V型高速柴油机采用四台增压器相继增压的计算模型。

The paper introduces the configuration and working principle of the sequential turbo-charging ( STC ) system of multi-turbocharger , and builds a computational model for a marine V type high-speed diesel engine with STC system of 4 turbochargers ( 4TC ) .

为了缩短研制周期，降低制造成本，采用快速成型技术制造了HIF增压器涡轮叶轮。

To shorten developing cycle and to reduce manufacturing cost , the rapid prototyping technology was applied to make turbine impeller of HIF charger .

采用可变几何涡轮增压器（VGT）是改善增压柴油机低工况的有效方法。

The variable geometry turbocharger ( VGT ) is used to improve the performance of high pressure-ratio diesel engine , particularly at low load .

可变截面涡轮增压器（VGT）从根本上改变了传统涡轮增压器的性能，是迄今为止最为理想的涡轮增压器。

The variable geometry turbo-compressor ( VGT ) changes performance of the traditional types turbo-compressor radically . It is the best turbo-compressor so far .

CB-200型气波增压器的试验研究

Investigation of the Model CB-200 Comprex Pressure-Wave Supercharger

本文介绍了GZ680增压器的离心压气机与轴流透平的气动热力学设计思想及特点。

The thermoaerodynamic design philosophy and features of the centrifugal compressor and the axial turbine of the turbocharger GZ680 are discussed .

VNT通过调节废气涡轮增压器涡前压气后的压差，可将EGR率提高2%~12%。

The EGR rate could be increased by 2 % ~ 12 % through regulating the difference between the gas pressure before the VNT and the air pressure after the VNT by means of VNT adjustment .

进行了可变喷嘴涡轮增压器与WD615柴油机的匹配试验，并将匹配结果与原机进行了试验比较；

The matching experiment for WD615 diesel engine with VNT was also carried out , and the results were compared with those with constant geometry turbocharger .

按此准则对CA6DF2-24G型柴油机匹配了电动增压器，并进行了试验研究。

An electric supercharger is matched on CA6DF2-24G diesel engine according to the criterion , and experimental research is carried out .