增压系统

  • 网络turbocharging systems;pressurization system;booster system
增压系统增压系统
  1. 工业化超临界CO2萃取装置增压系统的设计

    Design of pressurization system for supercritical extraction device

  2. 为CZ-3A三级冷氦增压系统得到实施提供了一个必不可少的关键设备。

    It provides the cold helium pressurization system of the stage 3 of CZ-3A with a key device .

  3. V型柴油机采用定压和脉冲增压系统对性能影响的比较

    Comparison of the Performance Influence for V Type Diesel Engine Adopting the Different Pressure Boost System

  4. H系列电控共轨柴油机进排气增压系统设计、试验与计算分析

    Inlet , Exhaust and Turbo charging System Design , Experiment and Computational Analysis for H Series Diesel Engines with CRS

  5. MPC增压系统三分支流动计算模型研究

    Study of mathematical models of three way branch flow of MPC turbocharging systems

  6. 结合产品开发的实际需求,本文采用理论分析、数值模拟计算和试验研究相结合的方法,对H系列高压电控共轨柴油机的进、排气增压系统进行了较为详细、深入的分析研究。

    The objective of this paper is to study inlet , exhaust and turbo charging system of H series diesel engines with CRS by analytical , experimental and computational methods according to the actual requirement of production development .

  7. 提出一种适用于船用柴油机涡轮增压系统故障诊断的方法,即基于径向基函数(RBF)神经网络模型诊断方法;

    The method of fault diagnosis for the turbo charging subsystem in marine diesel engine , an artificial neural network model based on radial basis function ( RBF ), is presented .

  8. MSEM增压系统一维非定常流计算模型的改进

    Amelioration of One Dimensional Unsteady Flow Model for MSEM Turbocharging System

  9. 混合式MSEM增压系统流动特性与优化研究

    Research on Flow Characteristics and Optimization of Mixed MSEM Turbocharging System

  10. 对混合式MSEM增压系统排气管流动特性进行了研究。

    Flow characteristics of mixed MSEM turbocharging system are studied .

  11. 6110Z型车用柴油机废气旁通涡轮增压系统的试验研究

    Experimental study of turbocharging system with wastegate in 6110Z vehicle diesel engine

  12. 对贮箱增压系统的仿真表明,合理设计PID控制参数并根据经验预置与额定流量相近的调节阀初始开度,对于提高增压系统起动过程的平稳性有利。

    The simulation of LO_2 tank pressurization system indicates that PID control parameters should be set reasonably and the initial opening of pneumatic diaphragm control valve should be adjusted to nominal pressurant mass rate , which is effective to improve stability of pressurization starting transient .

  13. 本文主要研究了16V柴油机的增压系统与排气管系。

    This thesis is mainly concentrate on the charger system and the exhaust pipe train of 16V diesel engine .

  14. 用V-MPC增压系统改善车用柴油机低速性能的研究

    Research on Low Speed Performance Improvement of Vehicle Engine by V-MPC Turbocharging System

  15. 设计了一套适用于台架试验的电控缸内直接喷射LPG发动机的燃料供给系统,主要包括初级增压系统,高压产生装置,高压喷射系统三大部分。

    The main contents are as follows : A fuel-supplying system for direct injection electronic-controlled engine fueled with LPG in the lab condition , including the primary pressure system , the high-pressure producing device and the injection system with high-pressure , has been developed .

  16. 针对客车专用柴油机的配试要求,对琅驰6C系列发动机的增压系统、燃油喷射系统、燃烧系统等进行优化改进。

    The turbocharging , fuel injection and combustion systems of bus-use Launcher diesel engine are optimized according to the features of a diesel engine special for buses .

  17. 混合式MSEM增压系统混合管中间截面处的气体流速约在±50m/s的范围内喘动,会增加动量的掺混损失。

    The velocity at the middle section of mixed MSEM system exhaust pipe is about - 50m / s to 50 m / s , so it will cause momentum loss .

  18. 介绍了第二代B737飞机座舱增压系统后外流活门和加温垫的工作及控制原理,对实际维护中的一种典型故障进行了分析和研究。

    The paper summarizes the working process of outflow valve and heater gasket of second generation B737 , analyses a routine malfunction and provides a train of analysis .

  19. 本文关于高增压系统相继增压技术的研究成果可用于高速高Pme柴油机增压系统的开发,提高高增压柴油机的性能指标与技术水平。

    The fruits gained in this investigation are considered to be applicable to development of the supercharging system for high speed and high Pme diesel engines and to enhancement of the performance index and technical level of highly boosted diesel engines .

  20. 在一台高速12缸柴油机提高转速功率的改进设计过程中,应用性能分析软件AVL-BOOST对该机采用不同增压系统对性能的影响进行了分析计算比较。

    In the process of improving the rotating speed and power output for a high-speed 12-cylinder diesel engine , a performance analysis software AVL_Boost is applied to analyze , calculate and compare the influences of the diesel engine adopting different pressure boost systems on performances .

  21. 燃机电厂天然气增压系统的选择概述

    Selection of Natural Gas Boosting System in Gas Turbine Power Plant

  22. 脉冲转换增压系统在小型高速车用柴油机上的应用研究

    Application of Pulse Convertor to High Speed Small Vehicle Diesel Engine

  23. 柴油机增压系统热力参数分析及其图解法

    Graphical Method for Thermodynamic parameters of the Diesel Turbo Charging System

  24. 参数调整对混合增压系统动态性能影响的研究

    Effect of Parameter Adjusting on Dynamic Performance for Hybrid Turbocharging System

  25. 探索消除柴油机增压系统喘振的方法。

    The method for eliminating surge of supercharging system is explored .

  26. 压铸机增压系统的数学模型及仿真研究

    Model and Simulation Research for Pressurization System of Die Casting Machine

  27. 机车柴油机增压系统故障诊断仪的研制

    Development on fault diagnosis instrument for locomotive diesel engine turbocharging system

  28. 超高压增压系统压力波动特性研究

    Study to the Pressure Fluctuating Characteristic of the Ultra-High Pressure Intensifier System

  29. 车用柴油机在不同增压系统下的燃烧过程

    Investigation on Combustion Processes of Automotive Diesel Engine with Different Charging Systems

  30. 柴油机增压系统瞬态特性测控系统

    Detection and Control System for Turbo-charging System of Diesel Engine