弥散强化

喷射Al2O3粒子弥散强化α&黄铜的研究

Dispersion strengthening of α - brass by spraying a1_2o_3 particles

分析认为：纳米复合镀层的强化机制为基质金属强化和纳米Al2O3的弥散强化。

The strengthening mechanism is analyzed from two aspects of matrix metal strengthening and nano-particle dispersion strengthening .

Al2O3弥散强化Cu基复合材料高温拉伸行为研究

Tensile Behavior of Al_2O_3 Dispersive Strengthened Copper-based Composite at Elevated Temperature

Al2O3弥散强化铜电极点焊镀铝钢板的行为研究

Dispersion Strengthened Copper Electrode Behavior During Spot Welding of Aluminum-coated Steel

混粉工艺对纳米Al2O3弥散强化铜基复合材料摩擦学特性的影响

Study on the Tribology Characteristics of Nano-Al_2O_3 Reinforced Copper Based Composite

硝酸盐分解法制备Al2O3弥散强化铜基复合材料的研究

Al_2O_3 Dispersion Strengthened Copper Composite Manufactured by Decomposing of Nitrate

纳米Al2O3粒子浓度对弥散强化铜合金退火行为的影响

Effect of nano-alumina concentration on annealing behaviors of dispersion strengthened copper alloys

机械合金化制备SiC弥散强化铜基复合材料

Preparation of SiC Particulate Reinforced Cu Matrix Composites by Mechanical Alloying

陶瓷颗粒Ti3SiC2-碳纤维弥散强化铜基复合材料组织和性能研究

Microstructure and Properties of Ti_3SiC_2 / Carbon Fibre Dispersion-strengthening / Cu-graphite Composites

内氧化法制备Al2O3弥散强化铜合金的组织和性能

Microstructure and Properties of Al_2O_3 Dispersively Strengthened Copper Alloy Prepared by Internal Oxidation

Al2O3弥散强化铜内氧化动力学及其再结晶研究

Internal Oxidation Kinetics and Recrystallization of Al_2O_ ( 3p ) / Cu Composites

Ti3SiC2弥散强化Cu：一种新的弥散强化铜合金

Ti_3sic_2 dispersion-strengthened copper : a new dispersion-strengthened copper alloy

Cu-0.54Al2O3弥散强化铜合金的拉伸变形和断裂行为

Tensile deformation and fracture behavior of cu-0.54al_2o_3 dispersion strengthened copper alloy

Al2O3弥散强化铜与T2铜的真空钎焊研究

Study on Vacuum Brazing of Al_2O_3 Dispersion-strengthen Copper and Copper T2

Al2O3颗粒弥散强化Y－PSZ基复合陶瓷的R曲线

The R-Curve of Toughened Y-PSZ-Based Ceramic Composite with Al_2O_3 Particle Dispersion

烧氢对Al2O3弥散强化铜合金组织与性能的影响

The Effect of Annealing in Hydrogen Gas on the Microstructures and Properties of Al_2O_3-Cu Alloy

Cu-0.23%Al2O3弥散强化铜合金的高温变形特性研究

Study on high temperature deformation characteristics of cu-0.23 % al_2o_3 dispersion-strengthened copper alloy

Al2O3弥散强化316L不锈钢粉末的高速火焰喷涂

High velocity oxy-fuel spraying of Al_2O_3 dispersion strengthened 316L stainless steel powders

纳米Y2O3弥散强化Ni基合金激光熔覆层

Nano-Y_2O_3 Dispersion Strengthened Ni-Based Alloy Laser Coating

纳米α-Al2O3颗粒弥散强化镍基复合涂层的耐磨性能研究

Abrasive Resistance of Nanometer α - Al_2O_3 Particle Dispersion Reinforced Ni Matrix Composite Coating

原位合成TiC颗粒弥散强化2A50铝基耐磨材料

Fabrication of TiC Particles Dispersion-reinforced Aluminum Matrix Composite by In-situ Synthesis Technique

TiC弥散强化铁基合金粉末的研究

Study of TiC Dispersion Strengthening Fe Base Alloy Powder

原位合成TiC弥散强化304不锈钢的高温氧化行为

High-temperature oxidation behavior of 304 stainless steel reinforced by in situ TiC particulates

原位生成TiC制备弥散强化铜材料

Preparation of In-Situ TiC Particle Dispersion-Strengthened Copper Matrix Composites

WC对弥散强化铜的性能的影响

Effect of WC on Properties of Dispersion-Strengthened Copper

而对耐磨寿命的提高则是由于薄膜致密化及Ag相弥散强化的结果。

The increase in durability was resulted from both densification and dispersion-strengthen effect of Ag in the nanocomposite films .

氧化物弥散强化（ODS）合金在高温领域的应用

The Application of Oxide Dispersion Strengthened Alloys in High Temperature Area

WC含量对弥散强化铜Cu/WC组织与性能影响的研究

Effect of WC Content on Structure and Property of Dispersion Strengthened Copper of Cu / WC

挤压态Cu-Al2O3弥散强化铜合金组织结构与强化机制的定量探讨

Microstructure and Strengthening Mechanism of the Al_2O_3 Dispersion Strengthened Copper Alloy as Hot-extrusion

文章介绍了WC弥散强化铜的制备过程，通过比较WC弥散强化铜和纯铜的有关性能（硬度、电阻率、密度），指出WC弥散强化铜是一种有潜力的强化铜。

The process of manufacturing WC dispersion strengthened copper ( DSC ) was introduced by mechanical alloying .