微金属

准LIGA工艺技术在加工微金属齿轮中的应用

Application of Quasi-LIGA Process to Machining Metal Micro-gears

用散射图法测量微金属丝直径的理论误差及其修正公式

The theoretical error of scattering pattern method for measuring the diameter of metal thin wire and it 's modification

基于UV-LIGA技术的微注塑金属模具的工艺研究

Study on Process of Microinjection Metal Mold Based on UV-LIGA Technology

检测仪硬件由微结构金属氧化物气体传感器阵列、气体进样装置及高速SOC单片机为核心的信号处理电路组成。

The hardware of the detector consists of a metal oxide micro gas sensor array , gas sampling apparatus and a signal processing unit with high speed SOC microprocessor .

以DOA基CMSs或DOA焦渣为碳源，微米镍粉为金属源，通过真空热处理法，合成了微纳米金属/碳复合材料。

Carbon / nickel composites were synthesized with the vacuum heat treatment methods and utilizing CMSs or DOA residue coke as carbon source and nickel as catalyst .

用微痕量金属分析仪（AS-01型）同时测定痕量锌、镉、铅、铜

Simultaneous Determination of Trace Zn , Cd , Pb , Cu with Trace Metal Analyzer Model AS-01

提出了用于电子纸的微结构金属模具的“选择生长”方法。

A'selective grow'method for fabricating E-paper metal mould is approached .

紫外激光微烧结金属粉制造微型金属零件的研究

Research on Micro Selective Sintering Powder to Fabricate Metallic Micro-component Using Ultraviolet Laser

丰富了多样化截面形状微结构金属模具的制作工艺路线。

The fabrication process routes of nickel molds with diverse cross-section microstructures are enriched .

有机基材表面构筑微纳金属/无机/生物高级结构的研究

The Research for Building Micro-nano Metal / Organic / Biology Advanced Structure on Organic-Supported Surface

含微缺陷金属材料损伤理论的几何拓扑

Topological Damage Theory of Metal with Defects

研究了利用UV-LIGA技术制造PMMA微流控芯片金属热压模具。

Using UV-LIGA technique to fabricate hot embossing mould of PMMA microfluidic chip was presented .

微纳米片状金属粉制备设备

The Producing Equipment of Micrometer and Nanometer Sheet Metal Powder

微结构对金属基复合材料宏观弹塑性性能的影响

Effects of microstructure on the macroscopic elasto-plastic properties of metal matrix composites

空心微珠表面金属化及其电磁防护性能研究

Electroless Metal Plating of Cenosphere and Its Electromagnetic Shielding Properties

一种微小型液态金属反应堆的反应性控制方案

A reactivity control scheme for a minitype liquid metal reactor

一种新型微流控芯片金属热压模具的制作工艺研究

A New Method to Fabricate Metal Hot Embossing Mould for Microfluidic Chip

空心微珠表面金属化研究

Surface metallization of cenospheres and precipitators

在二（2-乙基己基）磷酸钠的微乳液中金属萃合物对水增溶的影响

The Effect of Metal-extractant Complex on Water Solubilization in the Microemulsion Containing Sodium Di ( 2-ethylhexyl ) Phosphate

而利用微纳粉末金属材料进行微成型目前尚处于探索阶段。

However nowadays it is still at the stage of exploring to utilize micro powder metal material for micro-fabrication .

即通过在金属基材上形成选择性的导电与不导电图形，来制作深纹的“微杯”金属模具。

The Microcup pattern with insulating material was made on metal substrate and the mould was obtained with follow-up process .

建立了通过高温热解无机盐溶液前驱体制备微纳结构金属氧化物晶体的简便路线。

A facile thermal decomposition route has been developed for the synthesis of metal oxides using inorganic salt solution as precursors .

空心微珠经过金属镀层处理后，对可见光、近红外的反射能力都有所下降。

The reflectivity to the visible and near infrared ray will be dropped as cellshpere is plated with metal such as silver and nickle .

另外，微通道的金属整体式载体不仅可以提高催化剂载体的机械强度，还可以实现反应器的小型化，但其核心问题是载体与催化剂的粘附强度问题。

On the other hand , the metallic honeycomb support with micro-channel not only can improve the mechanical strength of the catalyst , but can compact the reactor volume .

峰温为1350℃、1200℃时，基体金属中产生大量晶间微裂纹，金属与瓷层界面无裂纹但出现气泡；

After cyclic heating to 1350 ℃ and 1200 ℃, many intergranular cracks occur in base metal In the interface of the metal enamel , bubbles occur , but no cracks ;

由单一金属前驱体溶液与较活泼金属间的置换反应制备各种微-纳米金属材料，是近年来广为采用的一种简便方法。

To prepare various micro / nano-materials through galvanic replacement reaction of a single metal precursor solution with a more active metal is a simple way , and this method is used widely .

本文也提出了目前有发展前途的几种微叠层金属间化合物材料，并认为制备纳米级微叠层材料、研究其断裂和脱层机理、增韧机理是该材料领域的重要研究方向。

Some promising micro laminates were proposed . The fabrication , fracture mechanism , delamination mechanism , toughing mechanism of the nano - sized micro laminates are important for the development of the materials .

该方法所制备的二氧化钛薄膜有较高的均匀性和附着力。（4）开展了磁控溅射对空心微珠表面金属薄膜的沉积机理研究。

The titania films coated on cenospheres using magnetron sputtering method were uniform , compact and adhesive . ( 4 ) The growth mechanism of the metal film coated on cenospheres using magnetron sputtering method was also studied .

对由高温超导体微块嵌于金属基中而形成的复合体的临界电流密度Jc进行了估算。

The critical current density Jc for high temperature superconductor composite block embedded in metal matrix is estimated .

本文对微合金钢焊缝金属中AF组织的相变动力学和相变热力学进行了系统的研究，同时对热输入对焊缝金属组织及性能的影响和焊缝金属中的夹杂物也进行了深入的研究。

In this paper , the transformation dynamics and thermodynamics of AF in weld metal in microalloyed steel were thoroughly investigated .