打孔

dǎ kǒng
  • bore;dock;punch;drill;perforate
打孔打孔
打孔 [dǎ kǒng]
  • (1) [drill]∶用带钻头的器具在固体或坚固材料中凿或钻孔洞

  • (2) [punch]∶穿孔;穿刺做孔

打孔[dǎ kǒng]
  1. 触摸屏和PLC在烟支激光打孔中的应用

    Application of PLC and Touchscreen in the Cigarette punching with Laser

  2. 刀具参数及NC参数的输入,实现打孔加工、切割加工及磨削加工的刀具轨迹的生成。

    The tool paths of punching processing , cutting processing and grinding processing are created by inputting the respective tool and NC parameters .

  3. 用打孔器打两个孔。

    Make two holes with a hole punch .

  4. (列车)乘务员用剪票夹在我们的车票上打孔(验票)。

    The train conductor punched our tickets .

  5. 用连续波CO2激光对氮化硅陶瓷打孔的实验研究

    Experimental investigation on laser drilling of si_3n_4 ceramics with CW co_2 laser

  6. CO2激光心脏打孔医治心肌梗塞的实验研究

    Experimental Study of Myocardial Revascularization by CO _ 2 Laser

  7. Al2O3陶瓷激光打孔重铸层的研究

    Study on the Re-cast Layer for Laser Drilling of Al_2O_3 Ceramics

  8. 打孔用高峰值功率声光调Q脉冲激光器的研制

    Study of High Peak Power Acousto-optical Q-switch Pulse Laser for Drilling

  9. 压电陶瓷的Nd∶YAG准脉冲激光打孔研究

    Investigation of the Drilling Conditions of Piezoelectric Ceramics by Pulsed Nd ∶ YAG Laser

  10. 采用Nd∶YAG经显微物镜会聚形成光刀可以对细胞或细胞器进行打孔或切割染色体。

    The optical scalpel can concise chromosome and punch holes in cells or organelles .

  11. 倍频Nd∶YAG/532激光在离体猪心肌打孔中工作参数的探讨

    Work Parameters for KTP-Nd ∶ YAG / 532 Laser Creating in vitro Transmyocardial Channels on Porcine 's Hearts

  12. 为高密度PCB激光打孔时参数的选择提供了一种模拟方法。

    Has provided one analogy procedure for high density PCB laser drilling when the parameter choice .

  13. 本文首先介绍了高密度PCB材料以及激光打孔技术在国内外的发展情况。

    This article first describes the high density PCB materials and laser drilling technology in domestic and international developments .

  14. Nd-Fe-B永磁材料激光打孔过程的研究

    Experimental research on laser drilling on Nd Fe B material

  15. 方法:以CO2激光烧灼、气化及打孔挤出囊内物破坏囊壁法分次治疗多发性血管平滑肌瘤瘤体;

    Method : Multiple angioleiomyoma was treated repetitiously with CO_2 laser ablation , gasification and perforation to extrude the content and destroy capsule wall ;

  16. 术中TEE检查5例,监测打孔成功率75%。

    The success rate of myocardial laser perforation detected by TEE in operation was 75 % .

  17. 方法对186例股骨头无菌坏死的患者,在骨科确诊、打孔减压术后2~3d开始用HBO治疗,同时加用中药治疗,作为HBO综合治疗组;

    Methods 186 femoral head aseptic necrosis patients received hyperbaric oxygen complex treatment 2 - 3 days after orthopedic drilling decompression ;

  18. 报导用连续波CO2激光加工机对氮化硅陶瓷的激光打孔试验,获得了深径比达18.75的结果。

    The test for laser of Si_3N_4 ceramics by CW CO_2 laser processing system is reported . The result shows that the proportion of depth to diameter is 18.75 .

  19. 方法:2003年12月至2005年06月就诊的CC耐药PCOS患者,阴道超声介导下经阴道卵巢打孔。

    Methods : From Dec 2003 to June 2005 , 38 cases with CC-resistance PCOS women were treated with TOD .

  20. 输油管线反打孔盗油抢修施工中的HSE管理初探

    Preliminary Investigation of HSE Management in Rushing to Repair Construction for Oil Pipeline Against Oil Stolen by Drilling Hole

  21. 本论文针对目前对在金属薄片上进行高速打孔的需求,从理论上分析并设计一套高重复频率声光调Q的Nd:YAG激光器。

    This paper based on the requirements of drilling on the slice metals with high speed , analyzed theoretically and design a high repetitive rate acoustic-optical Q-switched Nd : YAG .

  22. 提出了虚拟打孔法和虚拟剥层法,解决了实心辊中心和空心辊内表层的残余应力的精确测量问题,丰富了Sachs内剥层法的内容;

    The fictitious drilling hole method and stripping layer of the hollow roll method are put forward , which have developed the Sachs method .

  23. 利用PO算法,论文讨论了角度偏差、不平整度误差和打孔误差引起的RCS缩减情况。

    Based on PO , this paper discusses RCS shrinking caused by the deviation angle , the unevenness of error and punched by the error .

  24. 方法应用不同的记录模式对12例行PMR治疗的病患者进行左心造影打孔区定位检查。

    Methods Use different mode to record left ventracular angiography image in12 case CHD PMR .

  25. 目的探讨腹腔镜下卵巢电凝打孔术对治疗多囊卵巢综合征(PCOS)合并炎症的不孕症患者及PCOS患者的临床疗效。

    [ Objective ] To value the clinical effect for those infertility women who have polycystic ovary syndrome ( PCOS ) and inflammation .

  26. 结论:对于CC耐药的PCOS患者,采用超声引导下经阴道卵巢打孔技术是继腹腔镜下卵巢打孔术之后一种简便、有效的选择。

    Conclusion : TOD can be a novel method to treat CC-resistance PCOS patients as convenient and effective as laparoscopy ovarian drilling ( LOD ) .

  27. bFGF组,于AMI30min后行非透壁心肌打孔,并随后向孔道内注射含有bFGF的纤维蛋白胶(FG),以封闭激光孔道。

    Non transmyocardial channels were created and bFGF containing fibrin glue ( FG ) was subsequently injected into the laser channels of the bFGF group .

  28. 结果通过打孔法从62株嗜酸乳杆菌中筛选出16株对Hp具有抑制效应的菌株,其中2株抑制作用较强。

    Results : According punch method we identified 16 strains which had Hp antagonistic activity in 62 isolated Lactobacillus acidophilus , 2 strains among them had stronger depressive effect than others .

  29. 选取5mL塑料离心管,在其表面打孔,制成组织笼,灭菌烘干。

    10ml plastic centrifuge tube was perforated in surface to make tissue cages .

  30. 通过滤纸片扩散法,打孔法和MIC法进行抑菌活性研究。

    The antimicrobial activities of some common microorganisms were determined by three different methods of filter paper disc-agar diffusion method , beating holes method and MIC method .