染色工艺

还原橄榄绿B的电化学还原及其染色工艺的探讨

Investigation of electrochemical reduction and dyeing technology of Vat Olive Green B

还原大红R的电化学还原及其染色工艺的探讨红土矿还原生产镍铁熔炼条件的研究

Electrochemical Reduction and Dyeing Technology of Vat Scarlet R RESEARCH ON THE EXPERIMENTAL CONDITIONS OF SMELTING PROCESS FROM LATERITES TO FERRONICKEL

K型活性染料在真丝上染色工艺条件正交实验分析

Crosed Test Analysis of Dyeing Silk with K Reactive Dye

在涤棉混纺织物用分散与活性染料一浴湿短蒸法染色工艺探讨中，选用低温耐碱性分散染料配合高温K型活性染料进行单因素分析试验。

Experiments and results of one-bath wet rapid-steaming dyeing of T / C fabric with disperse and reactive dyes are discussed .

研究结果表明，不同染料和染色工艺对刨花表面的相对自由基浓度有显著影响，染色对OSB的性能无不良影响。

Results revealed that both dyes and dyeing procedure had significant influence on the free radicals , but had no negative effects on properties of the colored OSB .

分析了染色工艺过程的PID控制算法，提出一种分段改进PID参数的控制方法。

This paper introduces the PID control over the dyeing process . A step wise control method of improving PID parameters is also stated .

无毒染料皮革黑ATS染色工艺研究

Studies on Dyeing Technology of Leather Black ATS Nonpoisonous Dyestuff

本文对纤维素纤维改性剂CM的合成及其应用性能进行了研究，得到了最佳轧烘焙改性工艺及活性染料染色工艺。

An optimal process of padding & Curing modification and reactive dyeing is conducted based on the synthesis and application researches of modifier CM .

FN型活性染料的低盐染色工艺

Low salt dyeing process with FN reactive dye

不同染色工艺对PBT纤维卷曲性能的影响研究

Study about the Effect of Different Dyeing on the Crimp Properties of PBT Fiber

PTT纤维的染色工艺研究

Study on the dyeing technology of PTT fibers

Bes型活性染料在苎麻织物上染色工艺探讨

Studies on Dyeing of Ramie Cloth with BES - Reactive Dyes

对染色工艺参数，如压强、温度和CO2的流量进行了分析，结果表明这些参数对染色效果影响较大。

The dyeing parameters such as pressure , temperature and CO_2 flux were analyzed , which influenced the dyeing to a large extent .

PTT弹性纱线筒子染色工艺

Cheese dyeing of PTT elastic yarn

通过单因素分析，探讨了大黄素天然染料上染PTT和PLA纤维的最佳染色工艺。

The optimum dyeing process on PTT and PLA fabrics with ultrasound were established by the single factor analysis .

用于汽车纺织品的Dacron多孔纤维在染色工艺中的优势

Dacron multi-channel fibers for automobile textiles-advantages in the dyeing process

探讨了新型接枝剂CY－1在全棉筒子纱无粉尘染色工艺中的应用；

Application of new type grafting agent CY-1 to non-dusting cotton package dyeing was re_searched .

在介绍染色工艺特点的基础上，详细阐述了模糊PID控制推理系统设计的过程，并给出了软件设计流程图。

On the basis of introducing the technology characteristic of dyeing , the process of designing a fuzzy PID control logic system is related in detail and the flow chart of software is given .

Coolmax针织物的前处理及染色工艺

The pretreatment and dyeing technology of Coolmax knitted fabrics

涤棉织物的PECH-amine改性与清洁染色工艺探索

Study on the Cleaning Dyeing Process of the Polyester-Cotton Blends Modified with the Pech-Amine

结果表明，采用稀土媒染轧染工艺效果较好，文中给出了天然染料用稀土媒染棉织物的染色工艺条件。结果：酶切、PCR及测序鉴定证实，pAd。

Results show that the dyeings using natural dyestuff with rare earth as mordant feature enhanced dye depth and color fastness . In addition , the optimum conditions for cotton pad dyeing using rare earth as mordant were defined .

活性黑KN-B的日晒牢度与染色工艺关系的研究

A Study on the Relationship Between Lightfastness of Reactive Black KN-B and Dyeing Processing

本文在可溶性还原染料对锦纶的染色工艺试验的基础上，着重对防光脆化问题进行了研讨。试验表明：印地素金黄IRK和妃红IR是促使锦纶纤维光化降解的光敏染料。

On the Basis of an experiment on the dyeing technology of solubilized vat dyes on chinlon , the light-degradation of the fibre is emphatically discussed .

有关分散染料与超临界CO2二元体系的相平衡数据（溶解度）实验测定及模型关联，对超临界流体染色工艺基础研究及工业化至关重要。

The measuring and correlating of the phase equilibrium data ( solubility ) in supercritical CO_2 / disperse dye binary system are a key to the foundational research and technologic development of supercritical fluid dyeing ( SFD ) .

双组分涤纶T-400染色工艺探讨

Dyeing process probe of T-400 bi-component polyester

对活性染料代用固色碱SL在活性染料浸染染色工艺中的应用性能进行研究，并比较使用固色碱SL与传统固色碱碳酸钠在应用性能和效果上的差别。

The applications of the substitutive alkali SL to dip dyeing with reactive dyes were studied , and the differences between SL and soda in fixation and effects were compared .

介绍了双组分涤纶T-400的染色工艺方法及特点。

In this paper are introduced its dyeing processing technology and features of T-400 bi-component polyester .

结果表明：选择合适的染料及配套的助剂，控制好染浴pH值、升温速率、保温温度及保温时间等染色工艺条件，可以改善尼龙66纤维的染色均匀性，提高产品质量。

The result shows that the suitable dyes and aids and the proper control of process condition including the PH value of the dyeing bath , time and speed of temperature increasing etc , will improve the dyeing uniformity of nylon 66 fiber and product quality .

皮革黑LR-N染色工艺的研究

The Application of Leather Black LR-N Dyestuff

通过正交试验，优化出染色工艺条件：压力30MPa，温度140℃，动程5mm，时间90min。

Through orthogonal tests , the optimized conditions for this dyeing process is obtained : pressure : 30 Mpa , temperature : 140 ℃, traverse : 5 mm and time : 90 min.