柔性轴

  • 网络flexible shaft;FLEX SHAFT
柔性轴柔性轴
  1. 柔性轴电机转子临界转速的动态测试技术研究

    Study of Dynamic Measurement Techniques on Critical Speed of Flexible Shaft Induction Machine

  2. 柔性轴&转子系统动力学研究

    Research on Dynamics of Rotor System-in Flexible Shaft

  3. 分析了在动载轴承非稳态非线性油膜力作用下,具有横向裂纹柔性轴Jeffcott转子在非线性涡动影响下的动力特性。

    An approach about the no-linear whirl dynamic behavior of elastic shaft Jeffcott rotor with a transverse crack , which is supported on the unsteady and no-linear oil film , is presented .

  4. 谐波齿轮传动柔性轴承受力分析

    Analysing Stress of Flexible Bearing under Harmonic Gear Drive

  5. 考虑间隙和柔性轴的圆柱分度凸轮机构动力学特性研究

    Study on Dynamic Respones of Cylindrical Indexing Cam Mechanism Considering Clearance and Flexible - axles

  6. 如何加工柔性轴

    How to Machine the Flexible Axis

  7. 对Y500-2型高速柔性轴电机进行了全面的振动测试。

    This paper introduces the whole vibration test process of Y5002 type high speed flexible shaft motor .

  8. 柔性轴设计独特,解决了螺杆泵偏心距大,负载重的难题;

    Unique flexible shaft design to solve the problem of large excentricity and heavy load of the pump ;

  9. 非稳态非线性油膜力作用下柔性轴裂纹转子的动力特性分析

    Dynamic behavior analysis of elastic shaft rotor with a crack supported on the unsteady and non-linear oil film

  10. 电机采用柔性轴驱动系统直接传动转头,运行平稳,振动小,噪音低。

    Flexible axle driven system which drive the rotor directly , smooth in operation , low noise and small vibration .

  11. 在采用液体静压和液体动压轴承的柔性轴的高精度单级直齿和斜齿减速器上已经过实验论证。

    Experiments have been conducted on a high-precision single stage spur and helical gear reducer with flexible shafts mounted on hydrostatic or hydrodynamic bearings .

  12. 传动系统中柔性轴模型考虑了传动轴的刚度和阻尼,便于对转动系统进行疲劳强度分析和稳定性分析。

    Considering the rigidity and damper of the axle , the flexible shaft model makes the analysis of the intensity and the stability more accurate .

  13. 通过建立凸轮机构在运动过程中的力学方程及柔性轴五自由度动力学模型,研究机构的啮合特性和动力学性能,能够为滚珠型弧面凸轮连续传动机构的设计、制造及其实验研究提供理论依据。

    Therefore , it is significant to study the meshing characteristic of the mechanism and its dynamic performance by establishing its mechanics equations and flexible shaft five-degree-freedom dynamic model during its motion .

  14. 计算机在柔性转子轴的临界转速实验教学中的应用

    Application of Computer in the Teaching of Critical Speed Experiment of the Flex Rotor Axis

  15. 柔性路面轴载换算式在北京地区的验证与补充

    The Verification of and addition to the Equivalent Axle Loading Conversion Formula for Flexible Pavement Based on Beijing 's Pavement Data

  16. 通过将计算机用于柔性转子轴的临界转速实验教学,对柔性转子轴在通过其临界转速时进行了相关数据的测量,并阐述了将计算机应用于该实验的优点。

    Through using the computer in the teaching of critical speed experiment of flex rotor axis , this paper measurers the revenant data as the flex rotor axis passing the critical speed , and expounds the advantages of using computer in this experiment .

  17. 单列短圆柱滚子轴承柔性航天器单轴姿态机动的鲁棒稳定性分析

    Single row cylindrical roller bearing Robust stability of flexible spacecraft during attitude maneuver

  18. 电火花成形机高性能柔性化多轴联动数控系统的研究

    The Study of High Performance Flexible Multi-Axes CNC System in Die Sinking EDM

  19. 柔性航天器单轴姿态机动的鲁棒稳定性分析

    Robust stability of flexible spacecraft during attitude maneuver

  20. 研制了高性能柔性化多轴联动电火花加工数控系统,论述了数控系统的软、硬件结构。

    This paper develops high performance flexible multi-axis synchronous machining CNC system in die sinking EDM machine tool .

  21. 以及首次提出了一种考虑风力机叶片弯曲柔性和传动轴扭转柔性的风力机等效三个质量块模型,并分析叶片柔性对机组暂态稳定性的影响。

    And a three mass wind turbine equivalent model considering both blade and shaft flexibility is firstly proposed to study the influence of wind turbine blade stiffness .

  22. 本文是在模拟发动机燃烧室压力条件下,进行柔性喷管全轴摆动的动态分析与计算。

    In this paper , an analysis and calculation for the dynamic characteristics of the omni-axial movable flexible joint nozzle are presented under the simulated motor chamber pressure .

  23. PAROS给出的柔性铰链绕z轴的转动刚度(柔度)计算公式相比,提出了更为简洁、精确的转动刚度计算公式,使其有利于柔性铰链的设计和分析。

    This will be propitious to the design and analysis of flexure hinges .

  24. 柔性基层沥青路面轴数系数研究

    Research on Equivalent Axel-number Coefficient of Asphalt Pavement with Flexible Base

  25. 此外,对柔性接触的多轴压缩试验也作了初步尝试。

    Test with flexible contact is also reported .

  26. 文中应用变结构控制,研究了柔性飞行器的单轴机动运动的控制问题,给出了到达规律,并分析了模态测量方法。

    After the analysis of a suggested reaching law , the overall nonlinear feedback control law is established .

  27. 柔性辊轧成形轴类零件具有周期短、成本低、高柔性的特点,但中心材料容易产生疏松或孔腔等损伤缺陷。

    The flexible rolling process is suitable for forming of the step shaft forgings , with the advantages such as short development period , lower cost and high flexibility .

  28. 建立了柔性空间飞行器三轴耦合姿态动力学模型和四元数姿态运动学模型,建模时考虑了帆板的弯曲变形和扭转变形。

    Three dimension attitude dynamical model with consideration of bending and torsional deformations of the flexible appendages is derived by using quasi coordinate LaGrange ' equations , and attitude kinetic model is described by quaternion .

  29. 为此,文中建立了异型截面弹芯柔性变形时弹轴运动的微分方程,以便分析柔性变形对杆式弹飞行性能的影响,特别是对异型截面弹芯的运动稳定性的影响。

    The paper establishes the movement difference equations of the projectile with distortion , so that the effect of the distortion can be acquired on the flight performance , especially on the movement stability of the projectile .

  30. 随着计算机技术和控制技术的飞速发展,实现数控系统的高性能、高精度、高速度、高柔性化、多轴协调运动、开放式和模块化设计成为研究的热点。

    With the incessantly development of computer and control technology , realizing NC system becomes the focus , toward high performance , high precision , high speed , high flexible , multi-axis harmony motion , opening architecture and modularization .