氮化硼
- 网络boron nitride;CBN;pcbn
-
本文主要介绍了单晶金刚石刀具,高温高压合成的聚晶金刚石(PCD)刀具,聚晶立方氮化硼(PCBN)刀具及化学气相沉积的金刚石膜(CVD)刀具的特性及应用。
This paper mainly introduced the properties and applications of superhard material cutting tools , including monocrystalline diamond tool , polycrystalline diamond tool , polycrystalline CBN ( PCBN ) tool and CVD diamond film tool .
-
在立方氮化硼的合成过程中发现了金属膜;
The metal films have been discovered on synthesised cBN surface .
-
WINTER钻石磨轮和立方氮化硼磨轮的选型
Selection for diamond abrasive wheel and cubic boron nitride wheel of winter
-
铂掺杂氮化硼纳米管及CO在其表面的吸附行为的理论研究
Theoretical Study on Adsorption of CO on Novel Pt-doped BN Nanotube
-
B2O3对合成立方氮化硼的影响
Influences of B_2O_3 on the Synthesis of cBN
-
本文主要研究立方氮化硼的制备、性质和n型掺杂等内容。
In this paper we mainly study preparation , properties and n-type doping of cubic boron nitride thin films .
-
氮化硼掺杂对(Ba,Pb)TiO3陶瓷特性的影响
Influence of BN doping on properties of ( ba , pb ) tio_3 ceramics
-
同时由合成后样品中立方氮化硼的生成区域对V型生长区温度梯度分布进行了分析讨论。
From the observation of cBN crystals growth within the sample capsule , the temperature gradient distribution has been discussed .
-
CVD反应温度对氮化硼纳米球体制备的影响
Investigation on Effect of the CVD Temperature onto Synthesis of Boron Nitride Nanosphere
-
用DFT计算立方氮化硼的状态方程及体积模量
DFT calculations of equation of state and bulk modulus of cubic boron nitride
-
热灯丝辅助射频等离子体CVD法生长立方氮化硼膜的研究
Study on cubic boron nitride films deposited by thermal filament assisted RF plasma CVD
-
立方氮化硼(CBN)工具材料及其生产、应用现状与发展趋势
Cubic boron tool material and its production , application and development
-
ArF准分子激光立方氮化硼薄膜的制备
Cubic Boron Nitride Thin Films Prepared by Pulsed ArF Excimer Laser Deposition
-
氮化硼(BN)纤维微结构与力学性能的关系
The Microcosmic Structure of Boron Nitride ( BN ) and its Mechanical Properties Piao
-
Mg-BN系中B2O3对立方氮化硼生长的影响
Effect of Boron Oxide on the Growth of Cubic Boron Nitride in Mg-BN System
-
Mo涂层的立方氮化硼(cBN)与玻化陶瓷复合烧结体的研究立方氮化硼的合成
Study on Composite Materials Sintered by Mo Clad cBN and Vitrified Ceramics Synthesis of Cubic Boron Nitride
-
通过磁控溅射及其后处理等方法在立方氮化硼(简写cBN)表面形成均匀的Ti镀层。
Well distributed Ti coatings were formed on the surface of cBN grits by means of magnetron sputtering method .
-
用触媒Mg-Mg3N2合成立方氮化硼
The Synthesis of CBN by Using Mg-Mg_3N_2 as Catalyst
-
用射频溅射法将立方氮化硼(C-BN)薄膜沉积在p型Si(100)衬底上,薄膜的成分由傅里叶变换红外吸收谱和X射线衍射谱标识。
The cubic boron nitride ( c-BN ) thin films were deposited on p-type Si ( 100 ) substrates by means of radio frequency sputtering .
-
FTIR和EELS结果还表明氮化硼主要以六方的形式存在。
FTIR and EELS results also showed that the BN mainly existed in the form of hexagonal structure .
-
立方氮化硼复合体的低压合成CO2加氢低压合成甲醇CuO-ZnO催化剂性能的研究
Study on the catalytic properties of methanol synthesis from carbon dioxide and hydrogen under lower pressure
-
Y-ZrO2增韧SiC/Si3N4结合聚晶金刚石/立方氮化硼的研究
Investigation on SiC / Si_3N_4 Bond Polycrystalline Diamond / cubic Boron Nitride Toughened with Y-ZrO_2
-
MW-ECRCVD制备立方氮化硼薄膜
The preparation of cubic boron nitride films by MW-ECR CVD
-
立方氮化硼(cBN)是一种具有广泛应用价值的Ⅲ-Ⅴ族二元化合物,其优异性质可与金刚石相比拟或胜之。
Cubic boron nitride ( cBN ) is an important compound of the ⅲ - V group .
-
将立方氮化硼(CBN)磨料依次浸泡于敏化液和活化液中,进行表面活化处理。
CBN ( cubic boron nitride ) grits surface were processed with sensitizing solution and activating solutions .
-
本文采用声光调QYAG脉冲激光径向辐射,对密实型树脂结合剂立方氮化硼超硬磨料砂轮进行微加工烧蚀修整试验研究。
Experimental study of trimming employs an acoustic-optical Q-swithched YAG pulse laser to radiate in orthogonal direction and micro-machining burn the densely resin bonded CBN super-abrasive wheels .
-
PCVD氮化硼膜形成过程及表面形貌的分析
Surface Morphology Patterns and Growth Process of PCVD Boron Nitride ( BN ) Films
-
介绍了超硬磨料立方氮化硼(CBN)砂轮磨削性能的优越性。
Superiority of grinding property of the extra-hard abrasive cubic borium nitride ( CBN ) grinding wheel is presented .
-
陶瓷结合立方氮化硼(CBN)磨削工具是一类用于磨削加工的新型陶瓷/玻璃复合材料。
Vitrified bond cubic boron nitride ( CBN ) grinding tools are new ceramic / glass composites for grinding .
-
通过XRD、FT-IR对两种BN纤维的物相分析得知纤维基本为六方氮化硼(h-BN),结晶度较高。
The main phase of the two BN fibers is hexagonal boron nitride ( h-BN ) substantially analyzed by XRD and FT-IR .