测厚仪

  • 网络Thickness gauge;thickness meter
测厚仪测厚仪
  1. 椭偏测厚仪测量结果的计算机数据处理

    Computerized Data Processing for the Measuring Result of Oval Polarized Thickness Gauge

  2. γ测厚仪的设计

    The Design of γ Thickness Gauge

  3. 可编程控制器在非接触式X射线测厚仪中的应用

    The application of PLC in non contact X ray thickness gauge

  4. 薄膜X射线测厚仪的设计与开发

    Development of X - ray Thickness Gauge for Plastic Film

  5. 往复式薄膜X射线测厚仪的研制

    Development of reciprocating X-ray thickness gauge for plastic film

  6. 影响X射线测厚仪测量精度的因素及维护方法

    The factors of impacting the X-ray thickness measurement accuracy and methods to maintain

  7. 有关X射线测厚仪技术的研究

    Research on the Technique of X-ray Thickness Gauge

  8. 同位素源磁带涂层在线X射线荧光测厚仪

    On-line radioisotope X-ray fluorescence instrument used for the thickness measurement of coating layer on tapes

  9. 基于Matlab的激光测厚仪的误差分析及数据仿真

    The Error Analysis and Data Simulation of Thickness Determination Equipment Using Laser Based on Matlab

  10. 基于测厚仪监控的厚控系统动态建模及其鲁棒H∞控制器设计

    Dynamic Modeling of Gauge Control System Based on Thickness Gauge and Design of H_ ∞ Robust Controller

  11. x射线锡涂层测厚仪

    X-ray tin coating thickness gauge

  12. 低能量X-RAY测厚仪与β-RAY测厚仪在薄膜生产中的应用比较

    Comparison of Low-Energy X-RAY Thickness Measuring Device and β - RAY Thickness Measuring Device Applied to Film Manufacture

  13. 基于XPEmbedded的嵌入式数字测厚仪设计与实现

    Design and implementation of embedded digital coat thickness measurement instrument based on XP embedded

  14. 介绍了一种X射线冷轧测厚仪控制系统的硬件设计和软件设计。

    It introduces the hardware and software design of control system in X-ray thickness gauge used in cold-rolled steel strip .

  15. 分析比较了低能量X-RAY和β-RAY两种测厚仪在薄膜生产测量中的差别。

    Difference between low energy X RAY thickness measuring device and β RAY thickness measuring device used in film manufacture is analysed .

  16. 目的:本文针对我国压力管道检测技术的现状,基于透射式工业CT的基本原理,研制开发了一种新型的便携式压力管道在线测厚仪。

    Objective According to the situation of detection technology , a new portable pipeline thickness gauge based on TICT theory is studied in this paper .

  17. 基于MCS-51单片机的智能辐射测厚仪

    Design of Intelligent Radiation Thickness Gauge Based on MCS-51 Single-chip Microcomputer

  18. SH型智能测厚仪

    Model sh intelligent instrument for thickness measuring

  19. 本文详细介绍应用在双向拉伸薄膜生产线上的X射线测厚仪的研制和设计过程。主要从三个方面对研制和设计作了详细介绍。

    This paper gives a detailed introduction about our developing and designing process for X-ray thickness gauge using in biaxial oriented polypropylene ( BOPP ) film .

  20. 它的特点是结构紧凑、能谱和强度稳定性好、发射面积小。目前它已成功地用干XYH-86型小面积X射线荧光镀层测厚仪中。

    The major features of this generator are compact construction , high stability in both X-ray intensity and its energy spectrum , and X-ray emission with small area .

  21. 本文叙述了X射线荧光测厚仪的原理、特点及测量头的设计考虑原则。

    This paper describes the elements and characteristics of XRF coating gauge , presents the design principles of measuring head and illustrates two gauges that are of our manufacture .

  22. 指出低能量X-RAY测厚仪将逐渐替代β-RAY测厚仪,成为今后薄膜厚度测量的主流机型。

    It is pointed out that the low energy X RAY device will gradually replace the β RAY one , and become an essential model for film thickness measurement in years to come .

  23. XFT-84基于微机X荧光涂层测厚仪

    XFT-84 microcomputer-based X-ray fluorescent coating thickness measurement instrument

  24. 为此建立了钢板的高精度厚度计式模型,采用X射线测厚仪检测参数和各种补偿算法对计算模型进行修正。

    For this reason , we develop a model which can calculate thickness for plate rolling , and an X-ray thickness gauge monitor and several compensation algorithms are used to compensate model error .

  25. 作为应用之一制成的核辐射测厚仪,已成功地实现了在很宽的范围内对不同材质的厚度测量,丰富和扩大了这一应用领域,揭示了特征X射线新的应用前景。

    The thickness gauge , as one of the applications , has succeeded in thickness measuring of the different materials in large range , and present a new application field for characteristic X-ray source .

  26. 介绍了电感式传感器的硬件结构及其实现电机齿槽信号的检测原理,阐述了DSP获取动子位置的计算方法。电感传感器及智能化磁法涂层测厚仪

    The hardware of the inductive sensor , the teeth-slot signals detection principle of long stator , and signals processed with DSP are elucidated . The Design of the Inductive Sensor and the Intelligent Coating Pachometer Using Magnetic Method

  27. 本文详细介绍了r射线测厚仪控制系统的基本工作原理及在精轧机自动控制系统中的接口应用与控制,同时对人机对话界面作了详细介绍。

    This paper introduces the theory of the radio measuring gauge control system , the control and application interface with finish mill control system , at the same time given the details of the HMI ( Hardware Monitor Interface ) .

  28. WCH型铝箔测厚仪

    WCH-type Aluminum Foil Depth-measuring Meter

  29. 方法采用Tomey,SP&2000型角膜超声测厚仪测量PRK术前及术后1月、3月及6月的角膜厚度。

    Methods Used Tomey . SP-2000 ultrasonic machine to measure the corneal thickness before and after PRK .

  30. 基于PCI-1710数据采集卡的多通道智能化同位素测厚仪设计原理与实现

    The designing principle and implementation of multi-channel intelligence isotope thickness gauge based on multifunction card PCI-1710