浸渍
- immersion;dipping;soak;macerate;pickle;soakage
-
[pickle] 浸在液体中泡透
-
肌肤之所浸渍。--宋. 苏轼《教战守》
-
其最佳工艺参数为:熔融焊料温度≤270℃,母材在熔融焊料中的浸渍时间为2~3s。
The best soldering parameters are temperature less or equal to 270 ℃, and soakage time in 2-3s .
-
最终选取浸渍1h,在350℃反应,降温时隔绝氧气等最佳条件制备载银硅藻土。
Through these tests , 1h soakage , reaction under 350 ° C and isolating oxygen when temperature drops is concluded the best condition for producing silver diatomite .
-
干邑白兰地也用于浸渍食材,给砂锅炖菜提味。
Cognac is also used to macerate and flavour ingredients and casseroles
-
交错层的浸渍不一致。
The dips of the cross-strata are irregular .
-
通过浸渍法制备镧和镧钛改性膨润土吸附剂,探讨了处理含磷废水的最佳条件
Bentonite absorbent modified by La and La-Ti was prepared with maceration method .
-
热模压辅助先驱体浸渍裂解制备Cf/SiC复合材料研究
Fabrication of c_f / sic composites via precursor infiltration and pyrolysis assisted by hot-pressing
-
桐油-亚胺H级绝缘浸渍漆的研制
Studies on H-Grade Insulating Impregnating Varnish Prepared From Tung Oil-imide Copolymer
-
浸渍负载型无铬CO高温变换催化剂工业侧流试验
Commercial sidestream test of a chrome-free carbon monoxide HTS catalyst
-
浸渍法制备无铬CO高温变换催化剂
On impregnated preparation for chrome-free catalysts for high-temperature shift reaction
-
P(204)-TBP浸渍树脂对硫酸介质中Sc~(3+)的吸附行为研究及其应用
Study on the adsorption of scandium in sulfuric acid medium with p_ ( 204 ) - tbp impregnated resin and its application
-
应用浸渍法对加铝样品进行二次Mg2+改性,调节强B酸和B酸的比例。
The aluminum-replenished samples were modified with Mg2 + by impregnation for adjusting the ratio of strong B acid to B acid .
-
低温溶剂化金属原子浸渍法制备Fen/MgO催化剂及其性质的研究
Preparation and studies of fe_n / mgo catalysts via solvated metal atom impregnation at low temperature
-
浸渍法制备NiO/γ-Al2O3催化剂中金属与载体的相互作用
Metal-support interactions in nio / γ - al_2o_3 catalysts prepared by impregnation
-
浸渍法制备的ZnO/r-Al2O3催化剂的宏观结构特点
The macrostructure characteristics of zno / γ - al_2o_3 obtained by impregnation method
-
建立了浸渍过程中树脂基体在纤维集合体内流动的统计力学模型。Resin方法进行纯化。
A statistical model is developed to study the flowing performance of resin fluid inside fibrous assemblies during the impregnation process .
-
真空压力浸渍法制备Gr/Mg复合材料
Vaccum Pressure Infiltration Manufacturing Gr / Mg Composites
-
结果表明:该新型H级阻燃无溶剂浸渍漆具有阻燃性能好、电气绝缘性能佳、低温快固化的特点;
The results showed that the impregnating varnish had good flame-retardant properties , and it could be cured quickly at lower temperature .
-
PVA浸渍合成革基布的生产工艺探讨
Production Process Exploration of PVC Impregnated Synthetic Leather Substrate
-
HK纤维高压浸渍工艺&废纸加工的新方法
The HK Fibers Autoclave Process & The Next Generation in Wastepaper Processing
-
杉木的PVA、MF真空加压浸渍改性试验
Chinese Fir Wood Modification with PVA & MF Vacuum pressure Impregnating Treatment
-
CAS浸渍管修补料的研制
Development of the Patching Material for CAS Impregnated Tube
-
采用溶液-凝胶浸渍涂布工艺在Al_2O_3陶瓷管上制备了掺杂SnO_2气敏薄膜;
Doped SnO_2 gas-sensing thin films are prepared on Al_2O_3 ceramic tubes by the sol-gel method .
-
采用醇盐法制备TiO2溶胶,用浸渍&提拉方式制成TiO2薄膜。
The TiO 2 films were prepared by soak-raise in TiO 2 sol , formed from hydrolysis of titanium alkoxide .
-
采用熔体浸渍工艺制备长玻纤增强PA6复合材料。
Composite was prepared with melt dipping that PA6 enhanced with the long glass fibre .
-
浸渍液的浓度、酸度和浸渍时间可影响H2PdCl4浸入Al2O3的深度。
The depth of impregnation of H_2PdCl_4 into Al_2O_3 can be affected by the con - centration , acidity of impregnation solution and impregnation time .
-
用溶胶-凝胶法和浸渍-提拉工艺在载波片上制备了均匀、透明的WO3+掺杂的纳米TiO2薄膜。
Homogeneous and transparent nano-TiO2 films doped with WO3 + were prepared on glass substrates by sol-gel processing and dip-coating technique .
-
超声浸渍法对CuO/CeO2/γ-Al2O3催化剂催化燃烧挥发性有机化合物性能的影响
Effect of preparation by ultrasound-assisted impregnation on properties of CuO / CeO_2 / γ - Al_2O_3 catalysts for catalytic combustion of VOCs
-
本文介绍了F级快固化无溶剂绝缘浸渍漆的合成及工艺性能,并对有关问题作了简单的分析。
This paper introduces the synthesize and technical properties of a new class F fast curing solventless Insulation Impregnating Varnish , and analyzes related problem simply .
-
通过混合法和共浸渍法合成了系列负载型WP加氢精制催化剂。
Supported tungsten phosphide catalysts were prepared by mixing and co-impregnation method .
-
采用浸渍法制备了一系列低Pt、Rh含量的Pt-Rh型汽车尾气净化催化剂。
A series of low Pt-Rh catalysts for automobile exhaust purification was prepared by dipping method .