电子束辐照

  • 网络electron beam irradiation;e-beam;PE-Xc
电子束辐照电子束辐照
  1. 表面活性剂(PVA)浓度对电子束辐照制备纳米铜锡合金的影响

    Effects of surfactant ( PVA ) concentration on preparing Cu / Sn alloy nanoparticles by E-beam irradiation

  2. 电子束辐照对鲜切胡萝卜表面食源性致病菌的灭杀效果显著。

    The effects of e-beam irradiation in killing food-borne pathogens were obvious .

  3. 降低晶体管h(FE)值的电子束辐照工艺的研究

    Electron-beam irradiation technology for decreasing the h_ ( FE ) value of transistors

  4. 低温下电子束辐照产生F2~+心及其荧光发射

    Production of f_2 ~ + centers by electron irradiation and their fluorescence emission

  5. 电子束辐照处理烟道气&CO对脱出NOx和SO2的影响

    Flue gas treatment with electron beam irradiation & effect of CO on removals of no_x , so_2

  6. Si(SiO2)Al2O3结构的电子束辐照效应

    Radiation effects in si - ( sio ~ 2 ) - alos structure

  7. 电子束辐照对HDPE结构与亲水性能影响的研究

    Effect of electron beam irradiation on structure and hydrophilicity of HDPE

  8. 电子束辐照对HDPE及其与Mg(OH)2共混体系力学性能影响的研究

    Effect of electron beam irradiation on HDPE and mechanical properties of its blend with mg ( oh ) 2

  9. 电子束辐照对PMMA样品介电常数的影响研究

    Influence on Permittivity of PMMA after Electron Beam Radiation

  10. 氢化作用对低能电子束辐照下GaN发光演变的影响

    Effect of hydrogenation on the luminescence evolution of GaN under low energy electron beam irradiation

  11. 研究了高能电子束辐照对聚酰亚胺薄膜(PI)试样电气性能的影响。

    The effect of high-energy electron beam radiation to electrical parameters of polyimide ( PI ) was studied .

  12. SiO2中电子束辐照产生的电子陷阱

    Electron Trapping Induced by Electron Beam Irradiation in SiO_2

  13. 电子束辐照法在MWNTs上修饰纳米CdS研究

    Modification of CdS on the MWNTs by Electron Irradiation

  14. 电子束辐照聚碳硅烷热解合成SiC陶瓷材料Ⅱ.低分子量聚丁二烯对不熔化反应的敏化效应

    Synthesis of SiC ceramics by pyrolysis of electron beam irradiated polycarbosilane ⅱ sensitizing effect of low molecular weight polybutadiene on curing reaction

  15. 通过杂质扩散工艺实验,试制了不同p区扩散深度和不同基区宽度的半导体断路开关二极管,利用高能电子束辐照方法改变器件中的少子寿命。

    The diffusion technology is used to fabricate the SOS device with different p-well depth and different base region width , and the irradiation method is used to shorten the minority carrier lifetime .

  16. 研究了在空气中电子束辐照所引起的HDPE分子结构变化以及辐照对HDPE亲水性的影响。

    The effect of electron beam irradiation conditions on the structure of HDPE and its hydrophilicity were studied .

  17. 本文通过FT-IR、SEM、接触角、DSC等方法对电子束辐照HDPE/PA6体系的界面相互作用及其对共混体系结构与性能的影响进行了研究。

    The effect of irradiation on the HDPE and its blends with PA6 were studied through contact angle measurement , DSC , SEM .

  18. HDPE经电子束辐照后产生部分降解,可生成少量分子量较小的氧化低聚物,这类低聚物的含氧比例较大。

    Electron beam irradiation causes the degradation of HDPE and some small molecules that contain many oxygen-containing groups are thus formed .

  19. 电子束辐照对LLDPE、EVA及其共混物阻燃性能和热降解性能的影响

    Effects of Electron Beam Irradiation on the Thermal Degradation and Flame Retardant Properties of LLDPE 、 EVA and Their Blends

  20. 电子束辐照引入的含氧极性基团改善了HDPE与PA6的相容性,从而提高了e-HDPE/PA6共混体系的力学性能;该体系对甲苯具有一定的阻隔性能。

    The compatibility and mechanical properties of e-HDPE / PA6 blend are thus improved .

  21. 分析电子束辐照对聚甲基丙烯酸甲酯(polymethylmethacrylate,PMMA)样品介电常数的影响。

    The effect of electron beam radiation on permittivity of polymethyl methacrylate ( PMMA ) samples was investigated .

  22. 应用电子束辐照法净化含SO2和NOx的烟气,是原子核化学反应工程在环境工程中的具体应用。

    The method of application of electronic beam irradiation to purify smoke with SO_2 and NO_X , is the practical application of atomic nucleus chemical reaction engineering in the environmental engineering .

  23. 提出了适用于X射线或电子束辐照、爆炸和高速碰撞等问题的一、二维弹塑性流体动力学数值模拟计算的一种新自由面格式。

    A new free surface scheme for 1 D and 2 D numerical calculation of elastic plastic flow is proposed to study e beam or X ray radiation , high velocity impact and blast .

  24. 研究了以EVA共聚物为基础,采用等离子体和高能电子束辐照接枝丙烯酸类单体样品的阻燃性能。

    An attempt has been made in the paper aiming at imparting flame retardancy to EVA copolymer by grafting acrylic monomers induced by plasma and electron-beam preirradiation .

  25. 本文研究了电子束辐照剂量对线性低密度聚乙烯(LLDPE)、乙烯-醋酸乙烯酯共聚物(EVA)及其共混物凝胶含量和力学性能的影响。

    The effect of electron beam irradiation dose on the gel content and mechanical property of LLDPE , EVA and their blends has been studied .

  26. 于80℃将敏化剂加入配有多种填料的顺-1,4-聚异戊二烯橡胶(IR)中,用1.00MeV的电子束辐照。

    Various sensitizers were kneaded into cis - 1,4 - polyisoprene rubber ( IR ) containing fillers under 80 ℃, and then irradiated using electron beam to prepare vulcanized rubber with good quality .

  27. 利用电子束辐照是在改善功率双极晶体管存储时间TS方面已逐步取代中子辐照或钴-60辐照的一种新兴技术。

    Electron beam irradiation , instead of neutron irradiation or Co-60 irradiation , is a new technique to improve the storage time TS of power bipolar transistor .

  28. 利用X射线光电子能谱(XPS)和X射线衍射(XRD)对高能电子束辐照前后晶体黄铁矿的表面结构进行了分析。

    The structures and compositions of pyrite surface before and after high energy electron beam irradiation were investigated by applying X ray photoelectron spectroscope ( XPS ) and X ray diffraction ( XRD ) .

  29. 本文研究了丙氨酸/ESR剂量体系对于60Coγ射线和电子束辐照的剂量学响应性能,并通过实验确定了丙氨酸薄膜剂量计的最佳测量条件。

    This paper studies several dosimetric characteristics of alanine / ESR dosimetry system on 60Co Y - ray and electron beam irradiation .

  30. 本文采用γ射线和电子束辐照在聚乙烯主链上引入含氧极性基团,增加了HDPE与无机粒子的界面相容性,通过优选界面增容剂进一步增强了γ-HDPE与白云母的相容性。

    Through y-ray and electron beam irradiation , some oxygen containing groups can be introduced onto the molecular chain of HDPE to increase the affinity of HDPE and inorganic fillers .