离心鼓风机

  • 网络Centrifugal blower
离心鼓风机离心鼓风机
  1. 污水厂TURBO离心鼓风机的喘振原因分析及对策

    Reason Analysis and Countermeasures for Surge of TURBO Centrifugal Blower in WWTP

  2. DLG型多回流道离心鼓风机

    Type DLG Centrifugal Blower with Multi Backflow Passages

  3. 因此本文对离心鼓风机模型进行全三维整机CFD计算,通过对风机内部流场的模拟来深入的分析不同叶片型线风机产生性能差异的机理。

    So full 3D-CFD calculation has been held on the centrifugal blower model , mechanism of performance difference among different blade profiles has been analyzed deeply by the simulation .

  4. 介绍TGM系列曝气离心鼓风机的主要特点。

    The main characteristic of the type of GM aeration centrifugal blower is introduced .

  5. 污水处理用齿轮增速组装型曝气离心鼓风机发展趋势

    Development Tendency of Geared Speed Centrifugal Air Compressor for Wastewater Treatment

  6. 离心鼓风机噪声治理研究与实践

    Study and practice on Noise Control of Large Centrifugal Blower

  7. 离心鼓风机冷却系统的维护与改造

    Maintenance and Reconstruction for the Cooling System of Centrifugal Blower

  8. 离心鼓风机转子不平衡响应计算的实践

    Practice on Rotor Unbalance Response Computation for the Centrifugal Blower

  9. 离心鼓风机油封失效分析与对策

    Failure Analysis & Countermeasure on Oil Seal of Centrifugal Blower

  10. 离心鼓风机和压缩机钛合金叶轮的焊接

    Welding for titanium wheel of centrifugal blower and compressor

  11. 离心鼓风机在硫酸系统中的应用

    Application of centrifugal blower in sulphuric acid system

  12. 化铁炉用离心鼓风机的主要技术特点

    Main Technical Characteristics of Centrifugal Blower for Cupola

  13. 一种简单可靠的高压离心鼓风机防喘振控制措施

    A Simple and Reliable Control Method for Preventing Surge of High Pressure Centrifugal Air-blower

  14. 离心鼓风机在冶炼烟气制酸系统中的应用

    Application of Centrifugal Blower in Sulfuric Acid Production System with Waste Gases from Zinc Metallurgy

  15. 离心鼓风机润滑油压偏低的原因分析及处理

    Cause Analysis and Treatment of Lubricating Oil Pressure Deviated to Low Value in Centrifugal Blower

  16. 本文对主要的五级离心鼓风机分别进行了性能试验。

    In this paper , the performance test of multi-stage centrifugal blower is carried out .

  17. 由试验结果可知,本系统的五级离心鼓风机的设计压比为1.6。

    By the test results , the design pressure ratio of five-stage centrifugal blower is 1.6 .

  18. 提出了硫磺回收装置用离心鼓风机转子的改造实例。

    An example of rotor transformation of centrifugal blower for sulfur recovery plant is put forward .

  19. 短叶片转角对开缝叶片离心鼓风机叶轮性能的影响

    Influence of Rotating Angle of Short Blade on the Performance of impeller of Centrifugal Blower with Slotted Blade

  20. 高速离心鼓风机是冶炼烟气制酸系统的关键设备。

    High speed centrifugal blowers are key equipment in sulfuric acid production system with waste gases from zinc metallurgy .

  21. 通过本部分的性能试验,利用最小二乘法对试验点进行拟合,由此获得多级离心鼓风机性能曲线及曲线方程。

    By using least-square method to fit the experimental points , multi-stage centrifugal blower performance curve and curve equation are got .

  22. 叙述了大容量、高压、高效离心鼓风机以焊代铸的方法及其效果。

    Zhou Mingguang The method efficiency of weld instead of casting for large capacity , high pressure high efficiency centrifugal blower are described .

  23. 因此本文将主要研究焦点定位于叶片型线和叶轮宽度对超低比转数离心鼓风机性能的影响。

    The study focus of this paper is mainly located in the influence of blade profile and impeller width on under-low specific speed centrifugal blower .

  24. 本实用新型涉及到离心鼓风机制造领域,是一种风机叶轮倾斜温控焊接台装置。

    The utility model relates to a field of centrifugal blower production , in particular to a fan impeller inclined temperature control welding table device .

  25. 本文根据工程中现有应用比较广泛的某一超低比转数离心鼓风机,设计了一个具有同样流量系数和压升系数的风机模型进行研究。

    This paper takes an industrial under-low specific speed centrifugal blower as a reference case and designs a blower model with the same parameters of flow coefficient and pressure coefficient .

  26. 为了进一步分析叶片型线对超低比转数离心鼓风机产生性能差异的原因,本文又对3种叶轮进行可视化流动实验。

    In order to further analysis the reason of performance difference among blade profiles on under-low specific speed centrifugal blower , flow visualization experiment is taken on the 3 different impellers .

  27. 现有的热泵系统主要应用于食品加工、化纤制造和木材加工等行业的干燥循环系统,而超低比转数离心鼓风机是该系统最关键的设备之一。

    The existing heat pump system is mainly used in the drying circle system of the industries such as food processing , chemical fiber manufacturing and wood processing and the under-low specific speed centrifugal blower is one of the most important equipment in the circle system .

  28. 本文论述了硫磺回收装置主风机的设计选用原则、选用方法及流量调节方式,给出了离心鼓风机的特性曲线换算公式,并提出了设计选用主风机所需注意的问题。

    This Paper discusses selection principle and method for main blower of Clause sulfur recovery unit , and control way of flow rate , gives a conversion formuls of characteristic curve of centrifugal blower , puts forward several matters to which the attention must be paid in selecting main blower .

  29. 高炉离心式鼓风机计算机控制系统的实现

    The Realization of Computer Control System of Centrifugal Blower for Blast Furnace

  30. 离心式鼓风机带调整销隔板的快速找正

    Rapid Alignment of Diaphragm with Adjusting Pin of Centrifugal Blower