耐高温材料

SiC质复相耐高温材料的碳化氮化制备及性能研究

Study on the Properties of SiC Composite Materials Prepared by Carbonization and Nitriding

芳砜纶（PSA）是一种耐高温材料。对于耐高温材料，了解它们的热稳定性，具有十分重要的意义。

It is very important to study the thermal stability of PSA ( Polysulfonamide ) fiber , a kind of high temperature fibers .

在含SO2成分、添加石英砂细粉的800°C烟气中，对7种耐高温材料进行了热态磨蚀腐蚀试验。

Hot erosion / corrosion test of seven kinds of materials for separating and reinjecting components in CFB was conducted in oil fired gas stream with SO 2 atmosphere and laden with quartz sand powder at 800 ° C.

高铝质耐高温材料的热态固体粒子冲蚀磨损行为

Solid Particle Erosion Behavior of High Alumina Refractory at Elevated Temperatures

聚酰胺-酰亚胺耐高温材料的制备和研究

Preparation and Research of Heat resisting Polyamide imide

真空密封垫圈材料被熔化，并不是采用耐高温材料；

The gasket material for the vacuum has melted and was not made for high temperatures .

工程师在需用耐高温材料时常常选用陶瓷。

Ceramics are often employed by engineers when materials which can withstand high temperatures are needed .

这些面砖敷贴在用耐高温材料制成的机头和机翼前缘。

The tiles are backed by a high-temperature-resistant material on the nose and leading edges of the wings .

本文首次综述了这类含环三磷腈环的耐高温材料的研究进展。

This article introduces the progress of these fire-and heat-resistant materials which contain cyclotriphosphazene for the first time .

聚酰亚胺复合材料是一种的重要的耐高温材料，以其优异的耐热性、力学性能、电绝缘性以及耐药品性，在航空、航天、微电子等工业领域应用广泛。

Polyimide composites are an important class of thermally stable materials . Polyimide composites have been widely used in aerospace , microelectronics and other industrial fields because of its excellent properties , such as heat resistance , mechanical properties , electrical insulation and chemical resistance .

对含12mol%铈的四方氧化锆多晶耐高温材料从17505K温度范围进行了50800cm`（-1）的喇曼散射研究，同时还实测了线膨胀系数随温度的变化。

Raman scattering studies have been carried out on 12 mol % Ce-Tetragonal Zirconia Poly-crystal over 50-800 cm-1 , and a range of temperature 17-505 K , a phase transition was observed from the tetragonal-like to monoclinic-like phase at approximately 165 ± 1 K when the temperature was lowering .

高性能的连续SiC纤维是制备耐高温复合材料的关键。

Continuous SiC fibers are critical for high-performance composites .

氮化硅等耐高温纳米材料的溶剂热合成GB/T16555.4-1996碳化硅耐火材料化学分析方法EDTA容量法测定三氧化二铝量

Solvothermal Approach Synthesis of Silicon Nitride and Other High-temperature Endurant Nanomaterials ; Chemical analysis for silicon carbide refractories Determination of alumina EDTA gas volumetric method

改性有机硅耐高温防腐材料的研制

Research on Modified Organic Silicon Material Bearing High Temperature and Anticorrosion

放射治疗不敏感。耐高温高分子材料的热分解动力学

Kinetic Studies on Thermal Degradation of High - temperature Resistant Polymers

耐高温复合材料用玻璃纤维表面处理研究（1）&酸碱刻蚀处理的研究

Study on the surface treatment of glass fibre for high performance composites

国外耐高温绝缘材料发展现状

Present State of Foreign Heat - Resistant and Insulating Materials

耐超高温材料研究

Research Progress in Materials for Ultra High - temperature Application

耐高温高分子材料的热分解动力学

Kinetic Studies on Thermal Degradation of High-temperature Resistant Polymers

天线罩用耐高温复合材料的研究

Study on high temperature polymer composites for antenna radome

可望在耐高温过滤材料中得到应用。

The fibers would have a great prospect for application of filtration materials .

对比各个配比的共混树脂，4-PPM质量分数为50%的树脂表现出较好的固化工艺性能和耐热性能，可作为耐高温复合材料的基体。

The blends resins might be candidate matrices for the high performance composites .

讨论袋式除尘器新型耐高温过滤材料的选择及工业应用。

An innovative high temperature material of pack-dust catcher was selected and applied in industry .

耐高温聚酰亚胺材料研究进展

Development of High Temperature Polyimide

研究表明这种胶黏剂可以用于陶瓷的修补以及耐高温复合材料的制备。

This adhesive can be applied in the preparation of heat-resistant composite materials and repair of ceramics .

国内生产的传统耐高温过滤材料在产量和质量上都较难满足现状，大部分产品仍然依赖进口，大大增加了我国环保产业的成本。

Our domestic products is hard to meet the status quo , both in yield and quality .

高温输送时，应选择耐高温的材料所制成的泵，请与我厂联系。

The high-temperature transport , they should choose the material made of heat pumps , please contact me .

钛酸铜钙/聚酰亚胺高介电常数耐高温复合材料的制备及性能研究

Fabrication and Study on Calcium Copper Titanate / Polyimide Composite with High Dielectric Constant and High Temperature Resistance

通过分析水刺产品内部孔隙率分布特点来分析水刺耐高温过滤材料的过滤特性，得出了其不同的过滤方式及其过滤效率。

We obtained theory and efficiency of different filtration methods by analyzing the internal porosity characteristics of the materials .

玻璃纤维针刺毡是一种结构合理、性能较好的耐高温过滤材料。

Glass fiber needled filter felt is a kind of heat-resistant filter materials with rational structure and excellent efficiency .