聚碳酸酯

聚碳酸酯（PC）材料的精密加工工艺的研究和应用

The Research and Application on Precise Machining Process of Polycarbonate Part

全球聚碳酸酯（PC）发展趋势概述

A Summary on Development Trend of Worldwide Polycarbonate

PC的回收：使用温和解聚聚碳酸酯基盘的方法。

Recycling PC : Using the temperate method to depolymerize PC.

对聚碳酸酯（PC）的耐环境应力开裂性和拉伸性能进行了研究。

The ESC and tensile properties of PC are studied .

CO2基脂肪族聚碳酸酯和环氧树脂共混体系的研究

Study on aliphatic from CO_2 / epoxy resin blends

低能离子束表面改性对聚碳酸酯（PC）粘接性能的影响

Adhesion Characteristics of Low Energy Ion Beam-modified Polycarbonate

CO2与环氧化物共聚或脂肪族聚碳酸酯也是很有潜在市场的商品。

Ester carbonate which is made from CO_2 also has very well potential market .

光盘级聚碳酸酯（PC）的回收利用技术

Recycling of Polycarbonate Used in Compact Disc

超临界CO2及共溶剂作用下聚碳酸酯的结晶和熔融行为

Effect of Supercritical CO_2 and Cosolvent on the Crystallization and Melting Behavior of Bisphenol-A Polycarbonate

采用苯基甲基硅树脂对聚碳酸酯（PC）进行阻燃改性。

The flame retardant modification of polycarbonate ( PC ) with methyl-phenyl silicone resin is studied .

采用自制的马来酸酐接枝三元乙丙橡胶/线形低密度聚乙烯共混物（（EPDM/LLDPE）-g-MAH），通过熔融共混挤出对回收光盘聚碳酸酯（PC）进行增韧。

Recycled CD Polycarbonate was toughened by maleic anhydride grafted EPDM / LLDPE through melt extrusion .

概述了聚碳酸酯（PC）/ABS合金国内外的开发应用现状，并综述了国内近年对PC/ABS合金力学性能的研究进展。

The present development situation of PC / ABS alloy at home and abroad is reviewed .

PE接枝共聚物增韧聚碳酸酯/PE共混体系的研究

Studies on systems of pc / PE Blend toughened by PE - maleic anhydride graft copolymers

这些新型聚碳酸酯弥补了普通双酚A型PC的一些缺点，扩大了PC的应用领域，具有一定的实际意义。

These new polycarbonates make up for some flaws of common PC and enlarge the application field of PC.

介绍了高密度聚乙烯（HDPE）/聚碳酸酯（PC）共混体系的增容剂的分子设计与合成技术。

Molecular design and synthesis of compatibilizer for HDPE / PC blend are introduced .

双酚Z型聚碳酸酯的合成工艺改进及在OPC中的应用

Process Improvement of Z-type Polycarbonate and Application in Organic Photoconductors

双酚A型聚碳酸酯自然老化的XPS研究

XPS Study on the Natural Weathering of Bisphenol A Polycarbonate

改性PTFE对聚碳酸酯的阻燃抗滴性能研究

Study on Flame Retardant and Anti-dropping of PC Modified by PTFE

聚碳酸酯（PC）/丙烯腈-丁二烯-苯乙烯（ABS）塑料合金是目前应用很广，很具有商业化价值的合金材料。

Polycarbonate ( PC ) / Acrylonitrile-Butadiene-Styrene ( ABS ) is a widely used commercial plastic alloy .

研究了可在聚碳酸酯基材上形成保护硬涂层的UV涂料配方体系。

Therefore , formulation system of UV curing coatings can form protective hard film on polycarbonate substrate .

采用自制的微孔发泡模拟机研究了温度和压力以及气体饱和时间对微孔聚碳酸酯（PC）泡孔结构的影响。

PC foams were prepared by a foaming simulator at different processing conditions of foaming temperature , gas saturation pressure .

用sol－gel法在聚碳酸酯PC上制备一层耐磨涂层。

Novel abrasion resistant coating materials prepared by the sol-gel method have been developed and applied on the polymeric substrate polycarbonate .

研究了聚碳酸酯（PC）/HBPS共混物的流动性能、力学性能、热性能及其相态结构。

The flowability , mechanical properties , thermal properties and morphology structure of the blends of HBPS / PC were studied .

结果表明：加热温度在聚碳酸酯玻璃化温度（Tg）附近时，加压方式直接影响试件的质量；

The results showed that when heating temperature is near the vitrification point , compression speed influences the quality of the parts directly .

SiO2/聚碳酸酯纳米相复合材料的制备与性能

The preparation and properties of the silica / polycarbonate nanocomposite materials

采用J积分法表征聚碳酸酯（PC）/弹性体共混体系的韧性。

The toughness of PC / elastomer blends has been characterized with J - integral method in this paper .

研究了不同共混方式对高密度聚乙烯（HDPE）／聚碳酸酯（PC）共混体系形态与性能的影响。

The effects of blending method on the morphology and properties of HDPE / PC blend were studied .

使用Pd系氧化还原催化体系氧化羰化双酚A和CO直接合成了聚碳酸酯。

Direct synthesis of polycarbonate by oxidative carbonylation of bisphenol A and CO was carried out using Pd-based redox catalyst systems .

聚碳酸酯（PC）是手机外壳常用材料，它是一种综合性能优异的热塑性工程塑料，具有较高的回收价值。

Polycarbonate ( PC ) is a typical material used widely in mobile phone shell . It is an engineering polymer with excellent comprehensive properties .

阐述了聚碳酸酯（PC）微孔泡沫塑料的制备方法，包括间歇成型法、连续挤出成型法、模压成型法；

The progress of research on preparing methods of microcellular PC foams was summarized , including batch microcellular foaming , continuous extrusion and mould pressing .