贴面

tiē miàn
  • Trim;wainscot
贴面贴面
贴面 [tiē miàn]
  • [wainscot] 任何材料的内墙衬里

  • 瓷砖贴面

贴面[tiē miàn]
  1. 这些塔楼是钢结构,花岗岩贴面。

    The towers are made of steel cased in granite .

  2. 成双成对的舞伴在跳贴面舞。

    Couples were dancing cheek to cheek .

  3. 他们坐在铺有福米加塑料贴面的餐桌前,桌上凌乱地堆着用过的茶杯。

    They sat at a Formica table cluttered with dirty tea cups .

  4. 摘要〕目的:研究瓷贴面复合体应力分布规律

    Objective : To study the stress tooth preparation with two kinds of porcelains . 〔

  5. B组(30个瓷贴面)使用光固化复合树脂粘接。

    B light - cured composite resin .

  6. 旋转扶梯石材贴面CAD的研究

    Research on CAD of the stone slice used on the handrail of eddied ladder

  7. 结论:帕娜碧亚F粘结系统是一种较为理想的烤瓷贴面粘结材料。

    Conclusion Panavia F system is a reliable and ideal material for porcelain veneer bonding .

  8. 环保型PVC贴面胶的制备

    Preparation of environment protection type PVC sticking gum

  9. 目的:尝试上颌中切牙贴面计算机辅助设计(CAD)方法。

    Objective : To develop a new method of computer aided design ( CAD ) of veneer on maxillary incisor .

  10. 目的通过计算机辅助设计(CAD)获得待修复的前牙贴面的数据,以备计算机辅助加工(CAM)之用。

    Objective To obtain the data of veneer through CAD ( Computer-aided design ) for CAM ( Computer-aided manufacuring ) .

  11. 树脂粘结剂对IPSEmpressI铸瓷贴面修复颜色的影响

    The influence of resin cement on the color of IPS-empress I ceramic veneer

  12. IpsEmpress全瓷贴面颜色效果的初步研究

    A preliminary study on the color effect of IPS Empress all - ceramic veneers

  13. 邻苯二甲酸二烯丙酯(DAP)类塑料装饰贴面材料的研制

    The Preparation of DAP Type Surface plastics Decoration Materials

  14. 选择30个氢氟酸(HF酸)浓度-时间搭配点,测试瓷贴面复合体整体粘结抗剪强度。

    After HF acid etching under 5 different HF concentrations and 6 exposing times , shear bonding strength of porcelain to enamel were tested .

  15. IPSe.max铸瓷贴面在前牙美容修复中的临床应用

    Clinical effects of IPS e.max all porcelain veneer on the anterior teeth

  16. IpsEmpress铸瓷贴面修复上颌年轻恒切牙冠折的临床观察

    Three years clinical observation of effect of young permanent incisal teeth with crown fracture restored by IPS Empress porcelain laminate veneers

  17. 结果:修复体的加工时间平均在20min以内,其中贴面所需时间最少,嵌体需要时间最长。

    Results : The average fabrication time was less than 20 minutes .

  18. MF浸渍纸贴面定向刨花板钢框模板的力学分析与计算

    THE MECHANICAL ANALYSIS AND CALCULATION OF STEEL FRAMED FORMWORK MADE BY OSB OVERLAID WITH MF RESIN IMPREGNATED PAPER Processing Technology for Mouldings Overlaid with Veneers

  19. IPS-Empress铸瓷贴面的临床效果评价

    Evaluation of a three-year clinical study on IPS-Empress ceramic veneer

  20. IPS-EmpressⅡ瓷贴面上前牙美容修复的临床评价

    Clinical Evaluation of IPS-Empress ⅱ Ceramic Veneer in Cosmetic Repairing

  21. IPS-Empress瓷贴面修复前牙间隙2年的临床评价

    Clinical evaluation of using IPS-Empress ceramic veneer to close the anterior tooth space

  22. 测试结果还显示,刨切薄竹背衬无纺布后再与MDF胶合,其表面胶合强度比刨切薄竹直接贴面MDF时低。

    It was also found that lining a nonwoven fabric on sliced bamboo veneer would result in decreased surface bond strength for the bamboo veneer overlaid MDF .

  23. 油漆薄木贴面中密度纤维板TVOC释放量与薄木贴面中密度纤维板差异不大,甲醛释放量很少,苯系物相对较多。

    Less formaldehyde and more benzene released from spray MDF veneered veneer that had little difference in TVOC emission comparing with MDF veneered veneer .

  24. 加一些墙面胶,把瓷砖和墙面贴合在一起。IPSe.max铸瓷贴面在前牙美容修复中的临床应用

    Use some glue to stick the ceramic tiles together . Clinical effects of IPS e.max all porcelain veneer on the anterior teeth

  25. E-max全瓷贴面边缘适合性的研究

    The study on the marginal adaptation of E-max ceramic veneer

  26. 【目的】评价3种烤瓷贴面(PLV)牙体预备的近期临床效果。

    Objective To evaluate the clinic results of three types of preparation of fired porcelain laminate veneers ( PLV ) .

  27. 目的:应用Meta分析法研究国内关于贴面修复的临床应用现状,评估5种类型贴面修复的总体平均成功率。

    Objective : Our aim was to make an inventory of clinical studies on veneer restorations ( VRs ) in China by using a meta analysis review procedure on an overall of results of 5 types of VRs .

  28. 方法:对冠折未露髓的上颌年轻恒切牙采用IpsEmpress铸瓷贴面修复后的临床效果观察2~3年。

    Methods : Young permanent incise teeth with crown fracture ( no pulp exposed ) were restored by IPS Empress porcelain laminate veneers . The restorative effect was evaluated in 2 to 3 years .

  29. 3D-FEA法分析粘固层厚度对三型瓷贴面复合体应力分布影响的比较研究

    Comparative study of the effect on stress distribution of Porcelain laminate complex with different bonding interface

  30. ZWT-35型全自动纸碗贴面机是一种多工位全自动的纸碗贴面成型设备。

    ZWT-35 automatic paper bowl veneer machine is a multi-station automatic bowl veneer molding equipment .