边界润滑
- 网络Boundary lubrication
-
电镀的Ag,Cu,Zn层在边界润滑状态下摩擦学性能
Tribological Properties of Coatings Electroplated with Ag , Cu or Zn Under Boundary Lubrication Conditions
-
本文利用Matlab建立了磁流体边界润滑时,摩擦系数与外加载荷、磁场、纳米粒子浓度以及摩擦副材料硬度之间关系的BP神经网络模型。
This paper establishes BP neural network model between load , intensity of magnetic field , density of nano-particles , hardness of friction pairs and friction coefficient in boundary lubrication of magnetic fluids with Matlab .
-
Al2O3的磨损机理是磨屑边界润滑下的晶粒拔出和沿晶断裂;
Wear of Al2O3 is explained in terms of the grain fracture .
-
采用EDX和AES分析了边界润滑膜的成分。
EDX and AES were used to examine the composition of boundary film .
-
这主要是由于在摩擦过程中钢球表面形成了由FeSO4、MoO3及Fe的氧化物等组成的边界润滑及防护薄膜所致。
This was attributed to the formation of a surface protective film composed of FeSO_4 , MoO_3 and iron oxides on the worn steel surface .
-
Fe-Ni-P合金镀层与几种材料配副在边界润滑下的摩擦学特性
The Tribological Characteristics of Fe-Ni-P Alloy Coating against Different Materials under Boundary Lubrication
-
利用分子模拟,以一种C30分子为例,研究了聚α-烯烃合成基础油在流体润滑和边界润滑时不同表现。
The performances of poly-alpha-olefin base oil under fluid lubrication and boundary lubrication were discussed .
-
Ni-P-Si3N4镀层对Si3N4颗粒具有良好的把持力,避免了磨料磨损的产生,摩擦副处于稳定的边界润滑摩擦状态。
Ni-P coating has better bond against Si_3N_4 particles to avoid abrasive wear . Steady boundary lubrication friction is formed within Ni-P-Si_3N_4 pairs .
-
根据边界润滑中的滚珠模型,将聚合物形微粒(PMB)作为新型的润滑添加剂引入到水基润滑中。
Polymer micro - ball ( PMB ) was introduced into water based lubrication as a new type additive based on the " roll ball " model .
-
利用MMW-1型立式万能摩擦磨损试验机分别在流体润滑、边界润滑和干摩擦条件下,测试了涂层材料的摩擦系数,分析了涂层的耐磨性及磨损方式。
The friction coefficient and wear resistance of these coatings were determined on the MMW-1 vertical omnipotence friction wear testing machine , under lubrication and dry friction conditions .
-
试验结果表明:有润滑时,硅橡胶和聚氨酯分别与316L不锈钢组成的摩擦副,其润滑机理是边界润滑,聚乙烯醇水凝胶(PVA&H)/316L不锈钢摩擦副的润滑机理为混合润滑。
The experimental results showed that the lubricating mechanism for the lubricated sliding pairs of silicone rubber / 316L stainless steel and polyurethane / 316L stainless steel are boundary lubrication , and the lubricating mechanism fnr the lubricated sliding pair of polyvinylalcohol hydrogel / 316L stainless steel is mixed lubrication .
-
边界润滑膜的微观分析
The Micro Analysis of Boundary Lubrication Film produced by EP Additives
-
边界润滑摩擦面固体润滑涂层技术发展的若干趋势
Some Developing Tends of Solid Lubricant Coatings on Boundary-lubricated Tribological Interface
-
齿轮工作时,齿面是处于边界润滑和混合润滑状态。
Gears lie in boundary and mixed lubricating condition as running .
-
在轧制变形区并存边界润滑和流体动压润滑;
Boundary lubrication and PHD is coexisted in deformed area .
-
分析了润滑油边界润滑的失效机理;
This paper analyzes the invalidated mechanism of boundary lubricating ;
-
边界润滑下滑动接触表面破坏行为的数值分析
Numerical Analyses of Breakage Behavior of Rolling Contact Surface under Boundary Lubrication
-
切削液形成边界润滑层动力学模型的建立
A Study on Kinetics Model of Forming Boundary Lubrication Layer during Cutting
-
混合润滑涉及到边界润滑、薄膜润滑、微观弹流润滑及流体动压润滑等多种润滑特征,润滑性能受到各种因素的影响。
Involving micro-EHL , thin film lubrication and boundary lubrication .
-
极压润滑剂基础油分子结构对边界润滑的影响
Effect of Molecular Configuration of EP Lubricant 's Base oil on Boundary Lubrication
-
纳米技术用于边界润滑中的探讨
Discussion on Application of Nanometer Technique in Boundary Lubrication
-
超高分子量聚乙烯材料的边界润滑特性研究
Behaviours of Boundary Lubrication on Ultra-high Molecular Weight Polyethylene
-
基于不同摩擦副条件下的边界润滑抗磨效果研究
Investigation on Anti-wear Effects of Borderline Lubrication under Different Condition of Tribological Pairs
-
边界润滑条件下磨损机理
Study on the Wear Mechanism under Boundary Lubricated Condition
-
X光电子能谱分析边界润滑膜特性的研究
Study on boundary lubrication film using X-ray photoelectron spectroscopy
-
电火花放电熔涂层在边界润滑条件下的磨损特性
The Sliding Wear Characteristics under Boundary Lubrication of the Coating Electrospark-deposited with Chromium Anode
-
边界润滑齿轮磨损的最恶速度现象分析
Analysis of Worst Velocity of Boundary Lubrication Gears
-
全膜润滑到边界润滑的过渡研究
Study of Transition from Full-film to Boundary Lubrication
-
铸铁滑动摩擦副边界润滑表面膜的考察
Research on the Surface Film of Cast lron Pairs in Boundary Lubricated Sliding Wear
-
边界润滑膜的形成与破裂分析
On Formation and Breakup of Boundary Lubricating Layer