遥感器

yáo ɡǎn qì
  • remote sensor
遥感器遥感器
  1. 推扫型TDICCD光学遥感器动态成像研究

    Study on dynamic imaging on push-broom TDI CCD optical remote sensor

  2. 介绍了线阵CCD遥感器单轴转台的工作原理,分析了转台模拟飞行器成像的误差,给出了转台的指标及参数设计。

    This paper introduces working principle of liner CCD remote sensor uniaxial turntable , analyses imaging error of turntable simulation flying and brings point and parameter design of turntable .

  3. 空间遥感器CCD组件热设计

    Thermal engineering design of CCD component of space remote sensor

  4. SiCp/AL复合材料在空间光学遥感器上的应用

    Application of sic_p / Al composite materials on space optical remote sensor

  5. 阐述了航天光学遥感器CCD成像单元仿真系统的工作原理;

    The work principle of the CCD imaging unit simulation system was described ;

  6. 推帚式航天遥感器CCD航向调制传递函数的讨论

    Discussion on CCD modulation transfer function of the pushbroom space remote sensor along track

  7. 基于FPGA的空间光学遥感器CCD信号检测系统设计

    Detection System Design of CCD Signals for Space Optics Remote Sensing Device Based on FPGA

  8. 空间光学遥感器的多光谱TDICCD信号检测与生成

    Detection and generation of multi-spectral TDI CCD signals for space optical remote sensors

  9. 遥感器CCD驱动器热设计及其在摄像过程中的温度变化

    Thermal design of CCD driver and its temperature changing in the course of taking picture of space remote sensor

  10. 基于刃边法的航天光学遥感器在轨MTF测试研究

    On Orbit MTF Test Research of Remote Sensors Based on Knife-edge Method spaceborne remote sensing

  11. 基于线性特征的中分辨率航天遥感器MTF在轨评价及其在图像恢复中的应用

    The Linear Feature Based on-orbit MTF Estimation and Image Restoration of Mid-resolution Space Remote Sensor

  12. 混杂复合材料空间光学遥感器拉压承力杆件RTM成型工艺及性能研究

    RTM Technique and Property Study of Hybrid Composite Support Pole Used in Space Optical Sensor

  13. 红外遥感器的MTF的变化直接影响到成像结果的变化。

    The change of MTF of infrared remote sensor affects the change of the outcome of image directly .

  14. 利用6S进行月光条件下遥感器信号模拟研究

    Using Modified-6S to Simulate the Remote Sensor Signal of Moon

  15. 文章对航天光学遥感器MTF测试方法进行理论分析,比较各种测试方法存在的优缺点。

    This article studies the theory of the testing methods , and the advantage and defect of each method .

  16. 文章主要研究采用刀刃法测量在轨遥感器的MTF。

    This paper mainly does research on how to use Edge Method to measure the MTF of on-orbit remote sensor .

  17. 所以,对于整个遥感器的主要物理参数MTF退化特性的监测,遥感器研制单位、遥感应用部门均非常关注。

    So the manufacture units and application departments of the remote sensing image pay great attention to degeneration inspecting of MTF .

  18. 通过对带偏振的辐射传输方程进行求解得到精确的Rayleigh散射计算结果,便可以对水色遥感器进行偏振修正。

    It can be corrected by the method that the vector radiative transfer equation ( VRTE ) is calculated to get the value of exact Rayleigh scattering .

  19. 为了在实验室条件下模拟线阵CCD遥感器的飞行成像,并验证其成像效果,设计了一种线阵CCD遥感器单轴转台控制系统。

    In order to simulate liner CCD remote sensor flying image and check up its image effect in laboratory , one kind of liner CCD remote sensor uniaxial turntable control system was designed .

  20. 实验室条件下IRMSS遥感器MTF与遥感图像参数的相关分析设计与性能评估

    The Correlation Analysis Between MTF of IRMSS Remote Sensor and Parameters of Remote Sensing Image in the Laboratory

  21. 针对探测平台受体积的限制,提出了用CMOS探测器构建微小型偏振成像遥感器的思路,分析了其可行性,研制了一套微型CMOS偏振成像遥感器实验系统。

    Aiming at detecting platform limited by the cubage , the idea that using CMOS detector to construct subminiature polarization imaging remote sensor is put forward , and its feasibility is analyzed .

  22. 另一方面,随着卫星遥感器在轨运行时间的增长,其性能会逐渐退化,MTF也会逐渐下降。

    On the other hand , when the remote sensor runs on orbit , its performance will gradually degenerate and MTF will gradually descend too .

  23. HY-1卫星COCTS水色遥感器精确瑞利散射算法研究

    Study of exact Rayleigh scattering arithmetic for COCTS sensor on " HY-1 " satellite

  24. CBERS-1红外遥感器图像处理系统设计

    The System Design of CBERS - 1 Infrared Multi - Spectral Scanner ( IRMSS ) in Image Processing

  25. 对于合成孔径雷达这种侧视遥感器图像,SAR图像中道路与周围背景对比度强弱与雷达的侧视方向及道路的延伸方向密切相关,针对这一问题,提出了一种多阈值局部检测算子。

    The contrast of road in SAR images with the background is tightly related with the side-looking direction of radar and the extension direction of roads . Aiming at this problem , a multi-threshold detector is presented .

  26. 探月光学有效载荷系统含CCD立体相机与干涉成像光谱仪两台光学遥感器,CCD立体相机完成的科学目标主要是与激光高度计配合获取月球表面三维立体图像。

    The system of the optical payload for the Lunar Explorer includes a CCD stereo camera and an imaging interferometer . The former is devised to get the solid images of the lunar surface with a laser altimeter .

  27. 实验证明,文中所采取的EMC分析及其优化设计方法,取得了预期的效果,实现航天光学遥感器EMC优化设计。

    And the experimental result proves that the EMC analysis and optimal design method adopted in this paper has obtained the expected effect and achieved the spaceflight optics remote sensors EMC optimal design .

  28. MTF(ModuleTransferFunction)调制传递函数,在物理光学理论中,是光学系统成像性能的评价指标。MTF的高低直接关系到遥感器研制过程的成本高低和成像质量的好坏。

    MTF ( Module Transfer Function ), in the physical optics theory , is a evaluating index of imaging performance of optics system , which has close relation to the manufacture cost of the remote sensor and the quality of imaging .

  29. 本文基于有限元基本理论,利用有限元分析软件(ANSYS),对遥感器主镜面形和光机结构性能进行仿真分析。

    This paper designed a simulation analysis about optical remote sensor structure , which make use of finite element software ( ANSYS ) based on finite element basic theory , and verified the scheme that was feasible and reasonable .

  30. 北京一号是具有双遥感器的灾害监测小卫星,其星载的CCD多光谱传感器可以获取32m的多光谱数据。

    China launched a disaster monitoring constellation satellite recently , called China DMC , which has two remote sensors . Its CCD multi-spectral sensor has a spatial resolution of 32m .