铁水

铁水运输仿真系统研究

Study on Iron Melt Transport Simulation System

本产品用于钢水或者铁水的球化处理。

The utility model is used for the spheroidization treatment of molten steel or iron melt .

基于ANSYS的铁水罐倾翻吊钩结构优化设计

Structural Optimization Design of the Hot-metal Ladle Roll-over Hook Based on ANSYS

基于数据挖掘的铁水硅质量分数SVM预测方法

SVM forecasting of hot metal silicon quality score using data mining

含铬铁水脱磷用BaO基渣系中Cr2O3的溶解度

Cr_2O_3 Solubility in BaO-Based Slags for Dephosphorization of Chromium Hot Metal

CaO基熔剂对铁水同时脱硫脱磷的应用性研究

Simultaneous removal of sulphur and phosphorus from hot metal with CaO-based fluxes

基于广义遗传优化的RBF算法在铁水脱硫中的应用

Application of RBF Algorithm Based on Generalized Genetic Optimization in Prediction Model for Molten Iron Desulfuration

铁水预处理用Al2O3-SiC-C砖的使用及其损毁机理

Application of Al_2O_3-SiC-C brick for hot metal pretreatment and its wear mechanism

含铌铁水-铌渣的平衡和渣中α（Nb2O5）的测定

The investigation of equilibrium between slag and hot metal containing Nb and measurement of α nb_2o_5 in the slag

KR预处理的工艺参数对铁水脱硫效果的影响

Effect of KR Pretreatment Process Parameters on Hot Metal Desulphurization Results

武钢二炼钢KR铁水脱硫生产实践

Production Application of KR Desulphurization at No.2 SMP of WISCO

济钢KR铁水预处理工艺设计

Process Design of KR Hot Metal Pretreatment in Jigang

铁水硅含量越低，kO越大。

Si content in hot metal was lower , kO was higher .

兑铁水条件下UHP电弧炉脱碳数学模型

A Mathematical Model of Decarburization in UHP Electric Arc Furnace with Hot Metal Charged

结果表明：球化铁水在高温保持过程中，氧活度不断增加，而RE，Mg，S含量降低；

The results show that the oxygen activity of the spheroidal liquid iron increases , while the contents of RE , Mg and S decrease in the maintained high temperature ;

100t铁水罐耳轴强度分析与修复

The Intensity Analyse and Repairing of 100t Hot Metal Ladle Trunnion

含CaCl2稀土氧化渣处理铁水的试验研究

Experiment and Investigation on Treatment of Molten Iron with RE-Oxide Slag Containing CaCl_2

考虑到偏最小二乘法（PLS）在处理多重共线性数据中的优势，利用PLS对高炉铁水含硅量进行预测。

Considering the advantages of partial least square ( PLS ) in dealing with collinear data , it is used to predict silicon content .

DISA线高硫铁水的型内球化

In-Mould Nodularizing of Ductile Iron with High S-content on DISA Production Line

50t电炉热装铁水工艺研究与应用

Research and application of hot metal charging into 50t EAF

昆钢高炉铁水在出铁时含碳量达饱和，运输过程中平均温降为1.5℃／min，产生大量片状石墨粉尘是必然的。

The BF hot metal at KISC is oversaturated with carbon and its average temperature fall reaches 1.5 ℃ / min during transportation , hence , a large quantity of kish is inevitably deposited .

通过对基于广义遗传优化的RBF算法与RBF算法的仿真比较，进一步阐明了该算法在铁水脱硫预报模型中的有效性和精确性。

Comparison between the simulation results of RBF and RBF algorithm Based on GGA optimization further proves the efficiency and precision of its application in Prediction Model for Molten Iron Desulfuration .

70t电炉热装铁水的实践与进步

Practicing and Progressing of Hot Charging Melted Iron in 70t Electric Furnace

应用有限元软件Ansys，对某铁水脱硫喷枪的工作温度场与应力场进行动态仿真，显示喷枪在一次工作循环条件下热应力的动态分布。

The working body temperature field and stresses field of desulfurizing lance has been dynamically simulated with the finite element software Ansys to show the dynamic thermal stresses distribution within lance in a duty cycle .

磷在碳饱和的铁水与CaO-CaF2-SiO2渣之间的分配比

Phosphorus distribution between cao-caf_2-sio_2 melts and CARBON-SATURATED iron

在5t铁水包中，对高硅铁水喷吹苏打和苏打-石灰混合粉剂进行脱硫试验。

In a 5t ladle , desulfurization experiments of high-silicon hot metal have been made by injection of soda powder or soda-lime mixture .

铁屑静态烧杯脱色实验表明，影响脱色的主要因素有：废水pH值、铁水投配比、反应时间、曝气、原水色度和染料种类。

Jar test for color removal of printing and dyeing wastewater with iron particle showed that main factor connecting with color removal are raw wastewater pH , dosage ratio of iron to water , reaction time , aeration , raw wastewater color and type of dye .

COREX工艺是当代冶金工业的炼铁前沿技术，可以使用铁矿和非焦煤生产出优质铁水。

COREX process , known as an advanced technology of metallurgical industry presently , can use iron ore and non-coking coal to produce high quality hot metal .

本文总结了安阳钢铁公司第三炼钢厂（以下简称安钢三炼）100t超高功率竖式电炉部分热装铁水的生产实践，并对部分热装铁水后的冶炼工艺进行了研究和优化。

The production practice of 100t ultrapower shaft furnace melting process with hot metal charging were thoroughly investigated and optimized , on which this paper shall be concentrated .

使用证明，KR法铁水预处理工艺选型合理，脱硫率稳定在90%左右，能够满足钢种、转炉和连铸机的生产要求。

The application has shown that the " KR " process is reasonable , the degree of desulphurization is 90 % . The process has met the requirement of steel grade , BOF and continuous casting machine .