铸造性能

  • 网络castability
铸造性能铸造性能
  1. Al-Si合金具有优良的铸造性能和力学性能,是铸造铝合金中最重要的一种,在工业中应用非常广泛。

    Due to their excellent castability and good mechanical properties , aluminum-silicon alloys are the most important and most widely used aluminum alloy .

  2. Mg-Gd-Y-Zr合金铸件具有优异的室温和高温力学性能,但是Mg-Gd-Y-Zr合金的铸造性能及其铸件的力学性能都与主要第二相的数量、种类密切相关。

    Mg-Gd-Y-Zr alloy castings possess excellent mechanical properties at room and high temperature , but the castability and mechanical properties of the Mg-Gd-Y-Zr alloy are closely related to the number and variety of the main second phases .

  3. Al3Ti/ZL101原位复合材料的铸造性能研究

    Study on Casting Properties of Al_3Ti / ZL101 in Situ Composite

  4. TiCp/Fe复合材料铸造性能的研究

    An Investigation on Castability of TiC_p / Fe Composite Material

  5. 过共晶Al-Si合金是一种铸造性能优良的合金。

    Hypereutectic Al-Si alloy is a good performance of casting alloy .

  6. 试验结果表明,新型合金经1220℃×2h水冷固溶化处理后,具有良好的耐均匀腐蚀性能、较高的抗晶间腐蚀与抗点蚀能力和良好的铸造性能。

    Test shows that the alloy after a special treatment is characterized by high corrosion resistance and good castability .

  7. Al-Si合金具有优良的力学性能和铸造性能,广泛应用于航空、航天及汽车制造等领域。

    Al-Si alloy has been widely used in aerospace and automobile industry as it has excellent mechanical properties and cast ability property .

  8. 过共晶Al-Si合金铸造性能优良,具有良好的耐磨性及低的热膨胀系数,在工业生产中应用广泛。

    Hyper-eutectic Al-Si alloy have excellent casting performance , abrasion resistance and low coefficient of thermal expansion , so it is extensive used in industry .

  9. 结果表明:硅锰钢中加入量w为015%的稀土合金后,其铸造性能得到了改善,铸态组织细化,为发展稀土铸钢奠定了基础。

    The result shows that the casting properties of SMS ( silicon manganese steel ) are improved and the casting structure is refined greatly after adding 0.15 % of No. 1 RE alloy to SMS .

  10. Al合金作为轻质结构材料,具有良好的力学性能、耐腐蚀性、热传导性和铸造性能,被广泛应用于微电子、汽车和航空等领域。

    As lightweight structural materials , Al-based alloys are of a good combination of mechanical properties , corrosion resistance , thermal conduction and cast ability , and thus have found extensive application in the fields of microelectronics , automotive and aerospace .

  11. 本文研究了钠变质和磷变质对ZL108合金铸造性能的影响。

    This paper deals with the Influence of modificator Na and P on castability of ZL108 alloy .

  12. ZA27合金强度高、铸造性能优越熔化时能耗低、基本上无污染,是一种很有前途的工程合金。

    ZA27 alloy is of high strength , excellent castability and of low energy consumed and pollution free.ZA27 alloy isa excellent engineering alloy .

  13. Al-Si-Cu-Mg合金的铸造性能优良,通过热处理可以大幅度提高其力学性能。

    Al-Si-Cu-Mg cast alloy is extensively used mainly because of its good castability and excellent mechanical properties by heat-treatment .

  14. 对于Al-Si-Cu系合金,兼有Al-Si系合金铸造性能好和Al-Cu系合金力学性能高的优点,已受到广泛的关注。

    The Al-Si-Cu series alloys , with such comprehensive advantages as good casting performances of Al-Si series alloys and high mechanical properties of Al-Cu series alloys , have received more and more attention .

  15. 本文介绍使用单一稀土和稀土与去气剂混合物对铅合金(ZL104)处理的两种试验,测定其对铝合金的气孔率、金相组织、铸造性能和机械性能的影响程度。

    The two experiments in which the aluminium alloy ( ZL104 ) was treated with rare earth and its combination with degasifier are reported .

  16. 在Zl201的基础上,调整合金成分,改善合金的铸造性能,进行压铸试验研究。

    On the basis of ZL201 , B , Zr , V are added to melt to enhance the cast ability before die cast experiment .

  17. 试验结果表明,该钢经1050℃×1.5h水冷(或空冷)固溶处理后,在浓硝酸介质中具有优良的耐蚀性与满意的韧性和铸造性能。

    The results show that the stainless steel , subjected to a solution heat treatment ( 1050 ℃× 1.5h , water cooling or air cooling ) has good corrosion resistance and satisfactory toughness and casting performance .

  18. ZL107合金具有良好的铸造性能和较高的力学性能,应用非常广泛,但目前还不能满足现代工程结构中大型、复杂、高强度重要铸件的要求。

    ZL107 is widely used because of better cast property and higher mechanical property , but it does not meet the need of large-scale , complicated and high strength castings in modern engineering .

  19. 研究结果表明,该钢经1150℃固溶处理可得到单相奥氏体组织,在20~80%H2SO4,温度为80℃的硫酸介质中具有优良的耐蚀性和良好的综合机械性能与铸造性能。

    The results show that it has a single-phase austenite microstructure after solution treatment at 1150 ℃, so to provide a good corrosion resistance in 20 % ~ 80 % H_2SO_4 at 80 ℃ and has a good synthetic mechanical properties and casting behaviors .

  20. 改善镍基合金铸造性能的研究

    Study on the Improvement in Casting Properties of Ni Base Alloy

  21. 改进齿圈结构提高铸造性能

    Structural Improvement of Ring Gear for the Increase of Casting Property

  22. 稀土对硅锰耐磨铸钢铸造性能的影响

    The Influence of RE Alloy on the Silicon-manganese Abrasion-resistant Steel Casting

  23. 超高锰钢铸造性能的研究

    Study on Cast Ability Property of Superhigh Manganese Steel

  24. 过滤处理对再生铝铸造性能的影响

    Effects of Degasification and Filtration Treatment on Foundry Property of Scrap Aluminum Sash

  25. 它可提高流度和其他铸造性能。

    It improves fluidity and other casting properties .

  26. 中铬抗磨铸钢铸造性能的研究

    Study on Castability of Medium-Chromium Wear-Resistant Cast Steel

  27. 它具有良好的耐蚀性能、较好的综合机械性能与铸造性能。

    It had good corrosion resistance , better synthetical mechanical properties and casting properties .

  28. 锶加入镁合金中可以提高合金的铸造性能;

    The strontium addition in Mg alloys significantly improves the diecasting property of the magnesium alloys .

  29. 铸造性能评价。

    Evaluation of casting performance .

  30. 并具有良好的断面均匀性和铸造性能,成本低廉。

    In addition , it also has good section uniformity and casting characteristics , and its cost is low .