阀组

  • 网络Manifolds;Valves;Valve Block;DUNGS
阀组阀组
  1. 针对链式有源电力滤波器直流侧电压不稳定以及各阀组单元直流侧电压不平衡现象,本文提出了一种直流侧电压均衡控制方法,很有效地解决了这一问题。

    Against the cascade APF DC side voltage instability as well as the various manifolds unit DC voltage imbalance , this paper presents a DC voltage balance control method , a very effective way to solve this problem .

  2. CO2固定式灭火系统遥控阀组的设计

    Design of the remote control valves for fixed CO_2 fire-extinguishing system

  3. SVC装置阀组检测电路的研究

    Research on Valve Block Detection Circuit of SVC Device

  4. 在原有PCM流量控制阀组中加上一个定差减压阀,使压力差近似保持定值。

    An invariableness pressure decompression valve is added to common PCM to keep pressure discrepancy invariable approximately .

  5. 在AGC系统中,AGC液压缸通过该供油装置与AGC伺服阀组相连。

    In the AGC system , the AGC hydraulic cylinder is connected with AGC servo valve through the oil feeder .

  6. 以PDMS为主体结构的pH激励微阀组简单且其性能适合于可随意使用的芯片实验室(lab-on-a-chip),而且该装置在控制过程中可以不需要任何的电子或机械元件等外围设备。

    Furthermore the fabrication process of pH-responsive-actuated micro-valve arrays using PDMS is simple and its performance is suitable for a disposable lab-on-a-chip .

  7. RT和FPGA的软件控制PID温度,XY平台运动,泵的运动,32继电器阀组,多以完全自动化的程序。

    The RT and FPGA software control PID temperature , XY stage movement , pump movement , 32 relays for valve manifold , and more to fully automate the procedure .

  8. ±800kV特高压直流保护阀组区测量点配置的探讨

    Discussion on Measuring Configuration of ± 800 kV Ultra HVDC System Protection

  9. 3~5t装载机新型多路换向阀组系列的研制及推广应用

    Development of Multi-way Directional Valve Group Series for 3 to 5 tonnage Loaders and Their Application Promotion

  10. 亚临界和超临界600MW机组高压调节阀组气动特性分析

    Analysis on Aerodynamic Performance of HP Governing Valve Groups for Subcritical and Supercritical 600 MW Units

  11. 实验结果表明:散热系统的水力特性、电阻率特性、热交换性能和控制性能能够满足散热系统以及SVC(静止无功补偿装置)阀组的要求。

    The results show that : hydraulic characteristics , electrical resistivity characteristics , heat exchange performance and control performance of cooling system meet the SVC ( Static Var Compensator ) valve requirements .

  12. 处理厂外阀组区占地:3000m2。

    Area for outlet valve group of export station : 3000m2 .

  13. 构建了VSC-HVDC系统控制体系框架,具体提出了建立四层结构的VSC-HVDC系统控制体系框架的观点,即直流系统控制层、换流器控制层、阀组控制层和独立控制层四层结构。

    A four-layer structure of the control system framework of VSC-HVDC is proposed concretely , which is made up with the DC system control layer , converters control layer , separate control layer and valves control layer .

  14. 湿式报警阀组替代方案的可行性分析

    The feasibility analysis of the substitute program of wet alarm valve group

  15. 数字式可控硅触发控制器作为换流阀组的触发控制核心。

    Digital controllable silicon firing controller is the control core of converter valves .

  16. 将空气管安装到阀组上。

    Fit the air lines to the valve block .

  17. 一种晶闸管阀组高压侧触发能量耦合获取单元

    An Unit to Gain Coupling High Side Trigger Power for Series Thyristor Stack

  18. 液压同步装置专用嵌入式阀组及其分析

    A Descriptive Analysis of Built in Valve Groups specifically Designed for Hydraulic Synchro

  19. 液压缸专用阀组在板坯连铸机上的应用

    Integrating valve unit with cylinder for slab caster

  20. 还讨论了蒸汽伴热系统的配管设计中常年和冬季伴热、集中供汽与疏水、疏水阀组配管等问题。

    Several problems about the design of steam tracing piping were discussed as well .

  21. 调节阀组性能及应用

    The Capability and Application of Control Valves Group

  22. 更换阀组-“一般警告注释”部分请遵守正确的拧紧力矩。

    Replacing valve block-section on " general warning notes " observe correct tightening torques .

  23. 阀组损失偏大的另一个主要原因是采用通流面积过小的滤网。

    Another one is the filter 's flow passage area , which is too small .

  24. 仪器由一个已知体积的球管和一个阀组或管网所组成。

    The apparatus consists of a bulb of known volume and valve block or manifold .

  25. 利用比肖夫装置控制高炉炉顶压力并联调节阀组在高炉炉顶压力控制中的应用

    The Application of Parallel Grouping Regulators in Pressure Control of Furnace Roof of Blast Furnace

  26. 高炉煤气系统减压阀组调节性能分析

    The analysis of regulatable performance on the pressure reducing valve in blast furnace coal gas system

  27. 一体化微阀组可以作为一种非常有效的工具用于药物传输和高吞吐量筛分。

    Integrative micro-valve array is one of useful tools for the drug discovery , high-throughput screening .

  28. 制作好的微阀组通过一系列不同的实验对其进行测试,结果操作简单方便,运行良好。

    The operation and the function of the fabricated micro-valve arrays were evaluated through the diverse experiments .

  29. 针对炉焊后热处理,应对特别复杂的部件(如阀组和泵的管汇)进行设计。

    C.1.5 particularly intricate parts such as valve and pump manifolds should be designed for furnace pwht .

  30. 安全及真空释压阀组演播厅雨淋灭火系统

    Safety and relief valve systems