驱动模块

  • 网络driver;driver module;Modules;Drive
驱动模块驱动模块
  1. LED大屏幕显示驱动模块的一体化设计

    Integration design of LED display screen driver module

  2. 驱动模块的电机速度采用PWM方式进行控制。

    The velocity of motor in driver is controlled in PWM manner .

  3. 电机驱动模块是该系统的另一个主体组成部分,它采用了基于该ARM芯片的变频调速矢量控制策略。

    It adopts ARM chip-based frequency vector control strategy .

  4. 基于嵌入式Linux用户驱动模块设计

    Design of User-driven Module Based on the Embedded Linux

  5. 通过调控多个红外LED驱动模块,构建了光学特征点网;

    Optical feature points network is constructed , through the regulation of several infrared LED drive module .

  6. 利用COM对象将驱动模块封装成构件形式。

    Packaging the I / O driver into a COM object .

  7. 控制系统包括DSP控制器、电机驱动模块、步进电机和减速器模块。

    The digital control system including DSP controller , driver module , steeping motor and retarder .

  8. 描述了一种基于DSP和CPLD控制的多路并行激光驱动模块的设计。

    A multiplex parallel laser driver module based on DSP and CPLD is described .

  9. 系统由DSP最小系统、智能功率驱动模块、隔离模块等组成,用DSP汇编语言编程。

    The system consists of the minimum system of DSP , IPM , isolation module and so on .

  10. NP防火墙协议栈驱动模块的设计与实现

    Design and Implementation of Protocol Stack Driver Module in NP-based Firewall System

  11. 该数据采集系统可以分为CCD驱动模块、数据采集模块、数据缓冲模块和数据处理模块四个部分。

    The system includes four blocks : CCD driving , data acquisition , data buffering and date processing .

  12. IGBT驱动模块内部电路解析及应用

    Analysis of Drive Circuits for IGBT and Its Application

  13. STD步进电机细分驱动模块的设计

    The Design of Stepping Motor Divided Driving Module

  14. IGBT驱动模块分析比较与选用

    Comparison and selection of IGBT driving - chip

  15. 模拟高压断路器系统的硬件主要由单片机控制系统、复杂可编程逻辑器件CPLD(ComplexProgrammableLogicDevice)、功率驱动模块及液晶显示器等组成;

    The system hardware consists of single-chip microcomputer control system , CPLD ( Complex Programmable Logic Device ) , power drive module and liquid crystal display .

  16. 图形用户界面(GUI)中窗口消息驱动模块和窗口管理模块设计和实现;

    Then the main module of Graphic User Interface such as message-driven mechanism , window management , are designed and implemented ;

  17. 该平台分为FPGA系统模块、光学器件驱动模块、信号调理模块以及电源模块四个部分。

    The platform includes four parts : the FPGA system module , the optical devices driver module , the signal conditioning module and the power module .

  18. 控制系统硬件设计详细介绍了DSP最小系统模块、输入输出模块、信号采集模块、串口通信模块和电机驱动模块的电路设计。

    The hardware part introduce the minimum of DSP module , input and output module , signal collection module , drive module and serial communication module circuit design in detail .

  19. 过滤驱动模块采用虚拟驱动过滤技术和IRP分层技术;

    Filter driver module adopts virtual driver and layered IRP ;

  20. 实现了USB总线驱动模块提供的回调函数,能够完成设备驱动的安装、加载和卸载操作。

    All the call back functions provided by USB bus driver module are implemented , so the device driver can be installed , loaded and unloaded successfully .

  21. 在已选器件基础上,将整个控制系统程序按功能分为芯片初始化模块、红绿灯循环显示模块、中断处理模块、LED驱动模块、读时钟及写时钟模块、键盘及显示模块。

    The software of system can divide into : initialization module , circulative display module , interrupting module , LED driver module , read clock and write clock module , keyboard and display module .

  22. 其中包括主要的五个模块的设计:A/D采样模块、功率驱动模块、保护电路模块、供电电源模块和DSP控制模块。

    Including the design of the five main modules : the A / D sampling module , power module , the protection circuit module , power supply module and DSP control module .

  23. 特别是嵌入式软件的设计,软件实现分成六大模块:海图显示模块,航线设计和航行监视模块,人机界面模块,鱼探模块,GPS模块,驱动模块。

    The system software is divided into six modules : Electronic Chart displaying module , course design and monitor module , people-machine interface module , fish-finder module , GPS module , driver module .

  24. 带CAN总线的CIGVFD外围驱动模块的研究

    The Peripheral Drive Model with CAN Bus of CIG VFD

  25. WANG-PCCOBOL语言编译系统CRT驱动模块实现方法分析

    Analysis of implementation of CRT drive module in the wang-pc COBOL compiler sysem

  26. 在本文的第四章,主要介绍系统的硬件设计,其中包括主要的三个模块的设计:供电电源模块、功率驱动模块、DSP控制模块。

    In this third chapter , it mainly introduces the hardware system design , including the three main design modules : power supply modules , power drive modules and the DSP control modules .

  27. 梯形图扫描API,通过读取I/O状态和编译后的梯形图数据结构,进行逻辑解算并将结果传送至驱动模块。

    The trapezium scans API , the logical calculation is carried out and the results are sent to drive module by reading I / O state and coded trapezium data architecture .

  28. 此外,设计了ADC驱动模块,能够实现同时4个通道的采样,实现各个模块数据的模数转换。

    We gat each value at last . In addition , we designed the ADC driver module which can realize four channel sampling and data conversion .

  29. UCDOS键盘驱动模块的分析与改进

    The Analysis and Improvement of Keyboard Drive Module for UCDOS System

  30. 论文最后对伺服驱动模块中的关键技术(PWM逆变)进行了研究,给出了SVPWM调制算法和高频调制方波的实现算法。

    Finally , the thesis studies the key technologies ( PWM Inverter ) of Servo drive module and provides the algorithms of SVPWM and High-frequency modulation square .