首页 / 词典 / good

高载

  • 网络High load;heavy loading
高载高载
  1. 基于虚拟仪器的高载条件下MEMS动态测试系统

    Dynamic test system for MEMS in high load condition based on virtual instrument

  2. 结论:南通地区HBV基因型以B、C型为主,C型为优势基因型,并与重型肝炎、肝硬化、肝癌的发生及血清HBV-DNA高载量相关。

    Conclusions : The dominant genotype of HBV in Nantong is genotype C ; Genotype C is associated with the development of severe liver diseases .

  3. 结果表明,高载Ti量催化剂在加压聚合条件下,具有高活性、高生产能力和降低产品灰分的优点。

    The results show that the catalysts with high Ti content possess high activity , high productivity and low ash content at press poly-merization condition .

  4. 同时,由于TiN的自润滑效应,涂层的减摩性远远优于M2钢,高载荷下摩擦系数仅是M2钢的5.3%。

    The antifriction performance of the TiN coating is also very excellent due to the self-lubricating effect of TiN , the friction efficient of which is about 5.3 % that of the quenched M2 steel .

  5. 在无润滑条件下,反应等离子喷涂TiN涂层的耐磨性明显高于淬火M2钢,在高载荷下,其耐磨性是M2钢的2.5倍;

    The wear-resistance of the RPS TiN coating is significantly higher than that of the quenched M2 high-speed steel . The wear resistance of the quenched M2 high-speed steel was improved about 2.5 times by the RPS TiN coating under high load .

  6. 该装置能够对高温高载条件下的试验件进行转速控制(0~128r/min)和转矩控制(0~50N·m)。

    It can control the rotation speed ( 0 ~ 128r / min ) and torque ( 0-50N · m ) of test samples at high temperature and high load .

  7. 由于在较高载荷下发生表面开裂,高含量的TiB2相增强原位复合材料发生了由轻度磨损向严重磨损形式的转化。

    Owing to the interfacial cracking which occurs under higher applied load conditions , the composite with high content of TiB_2 phase exhibited a transition from mild wear to severe wear over the applied load range from 10 N to 80 N.

  8. 高载能负荷对电网的影响及应对措施

    Influence of High-energy Load on Electric Power Grid and Its Countermeasures

  9. 高载药量萘普生凝胶透皮给药制剂的研制

    Investigation of naproxen gel with high drug content for transdermal delivery

  10. 阻容保护器在高载能用户的应用

    Application of Anti-accommodation Protector on High Energy Loss of Users

  11. 新型二氧化锰材料的制备及在超级电容器中高载量性能研究

    Fabrication of Novel MnO_2 and Its Application in Supercapacitor with High Loading

  12. 西部高载能行业发展与信贷风险

    Development and Credit Risks of Western High Energy Consuming Industries

  13. 这些拱门一直是在承重高载荷上的完美设计。

    The arch is an almost perfect design for bearing heavy loads .

  14. 汽轮机采用高载荷叶片和大焓降级的初步探讨

    Initial Investigation on Turbine Adopting High Loaded Blade and Large Enthalpy Drop Stage

  15. 高载能企业谐波对电力系统的影响分析

    Analysis on Influence of Harmonic from High Energy-loaded Enterprise on Electric Power System

  16. 该材料适用于高载荷下的润滑部件;

    The materials apply to sliding under high load .

  17. 而纳米铜在高载下对抗压能力的提高更为明显。

    However nano copper increased load carrying capacity markedly in a high load .

  18. 接带高载能负荷真空开关操作过电压产生的原因及其防护

    Occurring Reason and Prevention on Operational Over-voltage of Vacuum Switch Connected with High Load

  19. 高载比和高载出现频率对随机加载疲劳裂纹扩展行为的影响

    Effect of high load rate and occurrence in random loading on fatigue crack growth

  20. 研究还发现金属纳米铜镍复合粉体在高载荷下具有很好的减摩性能。

    Excellent antifriction of nanometer Cu-Ni composite powder under high-load was demonstrated in the experiments .

  21. 即使在高载气流速下仍有较高柱效率,可以实现短柱高效的快速分析。

    It is possible to perform high resolution and fast analyses with a short column .

  22. 考虑高载和阻尼介质时刚塑性圆板的塑性动力分析

    Plastic Dynamic Analysis of Rigid & Plastic Circular Plates Considering High Load and Damping Medium

  23. 高载药量萘普生凝胶的制备及抗炎镇痛作用研究

    Preparation of Naproxen Gel with High Drug Content and Investigation of Its Anti-inflammatory and Analgesic Effect

  24. 阻尼介质对短壳在高载作用下的塑性动力响应的影响

    The effect of damping medium on the plastic dynamic response of a short shell under high load

  25. 而在310N的高载荷下其主要的磨损机制为断裂磨损。

    And wear rate rapidly increases and wear mechanism changes into brittle fracture under high load of 310 N.

  26. 但受条件限制,疲劳试验只能在做过高载试验的飞机结构上进行,为此,进行了高载对疲劳寿命的影响研究和全尺寸疲劳寿命试验等研究工作。

    But for the local condition , fatigue life test must be done using the aircraft structure of carried-higher load .

  27. 高速高载时,磨损机理主要为粘着磨损和疲劳磨损。

    While during high load and high velocity , the wear mechanisms were mainly adhesion wear and fatigue peeling off .

  28. 并就水平直管内的高载荷比气固两相流动进行了数值计算,其计算结果和收敛速度都是令人满意的。

    Numerical results of a high loading dilute gas-particle flow in a horizontal straight pipe is given as an example .

  29. 双药胶束作为一种高载药率和高稳定性的载药形式,是胶束设计的一个新的选择。

    BDM in the potentials such as high drug-loading content and excellent stability might be an alternative to the micelles design .

  30. 承载能力的测试结果表明,常规添加剂在低载下能起到一定的作用,高载下则失效;

    The test of load carrying capacity show that additives worked in a lower load and were invalid in a higher load .