玻璃纤维

玻璃纤维表面化学镀Cu及其催化脱氢性能研究

A Study on Electroless Cu Plating on Glass Fibre and Its Dehydrogenation

DCS在玻璃纤维池窑拉丝生产线的应用

Application of DCS in glass fibre pond kiln bracing wire production line

"自拍臂"由玻璃纤维制成。

The " selfie arm " is made of fiberglass .

每片桨叶都是用轻木和玻璃纤维手工制成的。

Each of these blades is made by hand from balsa wood and fibreglass .

玻璃纤维润滑剂G的合成机理和应用探讨

Synthetic Principle and Application of Lubricant G for Glass Fiber

粉石英在E玻璃纤维池窑上的应用

Application of powdered quartz in the manufacturing of E - glass fiber by direct-melt process

玻璃纤维增强PP在汽车风扇中的应用

Application of Glassfiber Reinforced PP in the Fan of Automobile

玻璃纤维增强ABS力学及加工性能

Mechanical and processing characteristics of glass fiber / abs composite

磨碎玻璃纤维在MC尼龙中的应用研究

Study on the application of milled glass fibre in MC nylon

短切玻璃纤维（GF）增强PET复合材料的研究

Study on PET / GF Composite Reinforced by Short GF

对磨碎玻璃纤维填充MC尼龙进行了系列研究。

The milled glass fibre was used as stuffing in the MC nylon .

加入2%的抗冲改性剂可以提高玻璃纤维增强ABS复合材料的冲击强度。

Adding 2 % anti-impact modifier can strengthen the impact stress of GF / ABS composite reinforced .

稀土元素对玻璃纤维增强PTFE复合材料拉伸性能的影响

Effect of Rare Earth Elements on Tensile Properties of Glass Fiber Reinforced PTFE Composites

纳米TiO2改性玻璃纤维织物复合材料的摩擦磨损性能研究

Study on the Friction and Wear Behavior of Nano TiO_2-Filled Glass Cloth Composites

DSC法分析玻璃纤维/聚丙烯/聚乙烯复合界面的结晶行为

The Analysis of the Crystal Behavior of GF / PP / PE Composite Interface by DSC Method

本文成功制备了玻璃纤维增强聚丙烯复合材料，并对复合材料进行了力学分析，SEM和DSC分析。

This article successfully prepared glass fiber reinforced polypropylene composite materials , and analysis in mechanics , SEM and DSC .

玻璃纤维负载P25光催化接触氧化活性艳红X-3B

Photocatalytic Degradation of Reactive Red X-3B by Immobilized P25 in a Contact Oxidation Reactor

提出了一种混杂的由玻璃纤维加劲塑料（GFRP）缠绕混凝土和粘贴预应力碳纤维加劲塑料（CFRP）片材的预应力组合结构梁。

A novel hybrid beam with GFRP winding concrete and prestressed CFRP sheets is introduced .

玻璃纤维的表面处理及含量对GF／PVC性能的影响

The effects of surface treatment and weight loading of glass fiber on the behavior of gf / pvc

本文研究并合成了用作玻璃纤维浸润剂成膜组分的不饱和聚酯树脂ZR。

ZR unsaturated polyester resin used as a glassfiber sizing film former has been studied and synthesised .

高纯SiO2玻璃纤维析晶性能的研究

Crystallization Behavior of Silica Fibers

研究聚苯硫醚（PPS）树脂粉与玻璃纤维织物（GF）叠层模塑（粉末工艺）制复合材料的工艺与性能。

Composites fabricated from glass fabric stacking with thermoplastic PPS powder ( powder technology ) was evaluated .

本文主要论述了界面状态对复合材料FRP质量的影响及玻璃纤维的表面处理。

The influence of interface condition on the quality of FRP is reviewed , and treatment methods of fiberglass surface are taken .

PCB是由树脂、玻璃纤维及铜箔等所构成的难加工复合材料，材料各向异性明显。

PCB is the difficult processing composite materials constituted by the resin , glass fiber and aluminum foil , its anisotropic is obvious .

化学镀Ni–Co–P合金层玻璃纤维的热稳定性好，适宜的工作温度范围为：常温～180℃。

Electroless plating of Ni – Co – P alloy on the surface of glass fiber has good heat stability . The suitable working temperature range is lower than 180 ℃ .

未经处理玻璃纤维填充的PTFE复合材料和偶联剂处理玻璃纤维填充的PTFE复合材料都发生了剧烈的粘着转移；

The PTFE composite untreated and the PTFE composite treated with the coupling agent are characterized by severe adhesion and transfer .

本文运用扫描电镜、X射线衍射定性分析和定量分析等手段，研究了以TiO2为成核剂的Li2O-Al2O3-SiO2-B2O3系统玻璃纤维的核化晶化机理。

Mechanism of nucleation and crystallization of Li_2O-Al_2O_3-SiO_2-B_2O_3 system glass fiber was studied by SEM and XRD .

3种纳米粒子对高强玻璃纤维增强EAM树脂复合材料桩钉基体树脂力学性能的影响

Effects of three different nanometer particles on mechanical properties of dental FRC posts matrix resin

用SEM观察到玻璃纤维的表面光滑、低析晶、断口质密度高、断口贝纹呈明显沟状。

It is observed by SEM that glass fiber has smooth surface , low crystallization , high density of fracture and shellfish veins of fracture obviously submits ditch form .

用超细玻璃纤维滤膜采集杭州市某道路上机动车排放的苯并（a）芘，经超声萃取，高速离心后直接进HPLC分析。

The benz ( a ) pyrene discharged by vehicles was collected by air samplers with glass fiber filters , then analyzed by HPLC after supersonic extraction and clarification by centrifuge .