酸酐

suān gān
  • acid anhydride;estolide
酸酐酸酐
酸酐[suān gān]
  1. 一种新的环状膦酸酐的合成与X射线晶体结构

    Synthesis and X-ray Crystal Structure of a Novel Cyclic Phosphonic Acid Anhydride

  2. 用反应加工的方法可在ABS分子链上接枝酸酐基团。

    Acid anhydride groups are grafted onto ABS molecular chains by reaction processing .

  3. 其中聚酸酐类可降解性高分子材料是80年代初发展起来的一类新型可生物降解材料。

    Novel biodegradable polymers-poly anhydrides have been developed since1980s'by the group of langer .

  4. 这和易水解的物质如醋酸酐反应可以很容易转变为无水盐。

    This may be readily converted to the anhydrous salt by reaction with a readily hydrolysed material , such as acetic anhydride .

  5. 马来酸酐接枝C5石油树脂研究

    Study on graft c_5 petroleum resin by maleic anhydride

  6. 用连续CO2激光诱导马来酸酐的聚合

    The Induced Polymerization of Maleic Anhydride by Using CO_2 Laser

  7. PE接枝马来酸酐对PC/PBT共混体系性能的影响

    Influencing Effects of PE-g-MAH on Properties of PC / PBT Blends

  8. 稳定膦叶立德和邻苯二甲酸酐反应的NMR研究

    NMR studies on reaction of stabilized phosphorus ylide with phthalic anhydride

  9. 通过接枝产物的X射线光电子能谱及红外分析可以证实,马来酸酐已接枝到炭黑表面。

    It proved by X ray photoelectron spectroscopy and IR analysis that MAH was grafted onto CBS .

  10. 研究了它们对肌酸酐、尿酸和B(12)的吸附率,以及对苯酚的吸附性能。

    The capacity-of the carbonaceous adsorbents for creatinine 、 uric acid and B12 , and its sorp-tion isotherms for phenol were studied .

  11. 马来酸酐接枝POE改性SAN树脂的制备与性能研究

    Study on Preparation and Property of SAN Resin Modified by POE-g-MAH

  12. 马来酸酐接枝ABS及其应用

    Maleic Anhydride Grafted ABS and Its Application

  13. 实验结果表明,选择马来酸酐接枝的均聚聚丙烯(PPgMAH)作为增容剂,所制得的动态固化PP/环氧树脂共混物的力学性能较好。

    The results show that maleic anhydride grafted PP ( PP-g-MAH ) is a better compatibilizer .

  14. 用毛细管流变仪和DSC方法研究了马来酸酐接枝改性的聚丙烯(PPgMA)对PP/PPgMA共混体系流变性和热行为的影响。

    The effect of PP-g-MA on rheological behaviour and thermal properties has been studied with capillary rheometer and DSC method .

  15. 马来酸酐紫外辐照接枝POE的研究

    Study of Maleic Anhydride Grafted on POE Induced by UV Irradiation

  16. HDPE氯化原位接枝顺丁烯二酸酐共聚物的合成、性能和应用

    Synthesis , Properties and Application of HDPE Grafted MAH VIA In-Situ Chlorinating Grafting Copolymerization

  17. 采用熔融法研究了马来酸酐(MAH)接枝ABS。

    The maleic anhydride ( MAH ) grafted ABS is studied by molten method .

  18. POE与马来酸酐的反应挤出接枝

    Grafting of maleic anhydride on POE by reactive extrusion

  19. 用马来酸酐(MAH)对聚丙烯(PP)进行接枝改性,制得改性PP膜。

    It modified the PP through grafting MAH onto PP , and then prepared the modified PP film .

  20. 采用熔融缩聚法合成了PEG(1)-己二酸酐(2)聚合物。

    Poly ( PEG ( 1 ) - adipic anhydride ( 2 )) was synthesized by melt polycondensation .

  21. 以国产苯乙烯-丙烯腈-顺丁烯二酸酐共聚物(SAM)为原位反应性增容剂,制备了超韧PA6/ABS合金。

    The super-toughening PA6 / ABS blends were successfully prepared using a homemade styrene-acrylonitrile-maleic anhydride terpolymer ( SAM ) .

  22. 对马来酸酐接枝炭黑进行了结构表征和应用,结果表明:接枝炭黑使PVC分散性更好,并可显著提高抗冲击强度和拉伸强度。

    The results showed that the grafted carbon black had better dispersion in PVC , the impact strength and tensile strength increased obviously .

  23. 本文主要以顺丁烯二酸酐和丁二酸酐作扩链剂对DA系列聚醚进行改性并用渤海原油对其产物进行破乳评价,从而得出破乳效果与扩链剂、反应时间的关系。

    This paper mainly discusses the modification of a series of polyethers by extending reaction with maleic anhydride and succinic anhydride .

  24. 根据FTIR测定结果,推测在反应中可能发生酮与酸酐的缩合反应。

    It was deduced from FTIR that the condensation reaction was caused by a reaction of ketone group with anhydride .

  25. 1左右,且不随单体配比AM/MA的增加而变化,这表明丙烯酰胺和马来酸酐共聚合物作为CO2/CH4分离用膜材料,具有较好的CO2优先选择吸附性能。

    It indicates that the Poly ( AM-MA ) copolymer is a CO2 preferentially selective sorption membrane material for separation of CO2 / CH4 .

  26. 考察了丁二酸酐用量、反应时间、反应温度、反应pH值对低取代度淀粉丁二酸酯取代度的影响。

    The effect of some factors such as reaction time , amount of succinic anhydride , reaction temperature and pH value on substitution degree of starch succinate was investigated .

  27. 琥珀酸酐酰化时的pH值为8.5,温度为40℃,琥珀酸酐用量为谷朊粉用量的10%。

    And during the acylation of succinic anhydride , pH value was 8.5 , temperature was 40 ℃ and amount of succinic anhydride was 10 % of gluten flour .

  28. 目的:采用HPLC法测定替硝唑-聚癸二酸酐控释制剂的含量,并研究其释药特性。

    OBJECTIVE To develop an HPLC method for the determination of tinidazole-poly ( sebacic anhydride ) controlled releasing preparations , and study the drug release characteristic .

  29. 利用它可以模拟天然超氧化物歧化酶(SOD)、碳酸酐水解酶及酸性磷酸酯酶的活性部位研究生物活性。

    They can be used for researching bioactivity by simulating the active site of superoxide dismutase ( SOD ), carbonic anhydrase hydrolase and acid phosphatase .

  30. 研究了聚碳酸酯与ABS(PC/ABS)及PC/ABS与马来酸酐接枝聚乙烯共聚物(PC/ABS/PE-g-MAH)共混体系的力学性能和应力开裂性能。

    The mechanical properties and stress crack properties of PC / ABS and PC / ABS / PE g MAH blends were studied .