24v

The function of voltage regulator is to make 24V steady voltage output .

稳压控制电路的作用是将输出端电压稳定在24V。

Design of Controller Used in 24V DC Compressor

24V直流压缩机用控制器的设计

Integrated Appraisal of a Project to 24V / 48V Power Supply

一则24V/48V供电方案的技术经济评价

The 24V / 15A Instrument Power Supply With High Accuracy

高精度24V/15A仪表电源的设计

Mixing station should choose electromagnetic loop of 24V DC

搅拌站宜选用24V直流电磁线圈

Design of 24V / 5A Solar Energy Controller

24V/5A太阳能控制器设计

The voltage of the analog signals in control and protection circuits are all below DC 24V .

控制和保护回路模拟信号的电压都低于24V直流。

24V vehicle electric wrench is mainly applied to dismantle tire of heavy transport vehicles .

24V车载电动扳手主要应用于重型运输车辆轮胎的拆卸。

This instrument can undertake12V car electric horn , 24V durability test .

本仪器可进行12V、24V汽车电喇叭的耐久试验。

The whole signal system equipment is connected with 12-core cable and powered with 24V DC power supply .

整个信号系统设备由12芯电缆连接，直流24V电源供电。

At the same time , the temperature measurement circuit compensated the environment . The hardware system was powered by 24V DC .

同时设有温度测量电路可对系统进行温度补偿。

The 24V sub-system on-board mainly supply for the electrical and electronic devices related to the safety and availability .

24V车载电网子系统主要对与安全相关的耗电设备，以及对供电可用度要求较高的用电设备供电。

The simulation results show that phase-shifted full-bridge DC-AC-DC conversion structure levels can be realized transform 24V DC circuit performance .

仿真结果表明，移相全桥DC-AC-DC两级变换结构，可实现24V直流变换电路的性能。

It is better for diesel vehicles to be equiped with 12V / 24V dual system .

柴油汽车应采用12V/24V电系共用电路。

According to the tests , the switching power supply of + 24V / 1.5A designed by this method is of high reliability .

经测试表明按此方法设计的+24V/1.5A的开关稳压电源可靠性高。

Inverter power supplies applied in cars transform from 12V / 24V of storage battery DC into 220V AC.

车载逆变电源（又叫电源转换器）可以把汽车蓄电池的12V/24V直流电转变成大多数电器所需要的220V交流电。

In the application of above 24V fort current voltage grade control circuit , Voltage Alternating and resonant wave interference of input model for Programmable Logic Controllers must be resolved .

可编程控制器在高于24V的直流电压等级控制回路中应用时需解决输入模块的电压变换和谐波干扰等问题。

A high performance and noninsulated power supply unit that converts 24V of the battery to 110V was developed based on the operating principle of chopper boost .

本文基于斩波升压电源的工作原理，开发了高性能的非隔离DC-DC升压型变换器，将直流24V升压到110V。

When welding voltage is between 21V and 24V and welding current is between 210A and 270A , better welding line can be obtained .

发现超窄间隙焊的焊接电压范围在21～24V，电流在210～270A能够得到较好的焊缝成形。

This paper introduces the A. C monitoring of YZT24 / 5 . 6 / 0 . 5 communication power supply and the test method of the control panel , the rectifer panel and the 24V output panel .

介绍了YZT24／5.6／0.5通信电源设备的交流监测及控制盘、整流器盘、24V输出盘的测试方法。

At the same time , about the problems of this system , such as system halt , 24V DC power supply and the override of main blow flow low and so on , the improvement suggestion and prevention measurement is presented .

同时针对系统出现的问题，如系统死机、24VDC电源、主风低流量信号切除等问题提出了规避措施和改进方案。

It consists of bomu light , 12V / 24V transformer , 5 / 50W variable potentiometer , silicon , capacitor , plugs and the worn ATX box .

自制的波姆光治疗仪由波姆光源、12V/24V变压器、5Ω/50W可调电位器、硅堆、电容器、电源插头及废旧ATX电源箱组成。

The switch power source is supporting product of host equipment communicating by letter , Mainly to provide 24V , 48V or higher direct-current power source for large-scale programme-controlled switching equipment and transmission equipment and mobile communication equipment as well .

开关电源作为通信主设备的配套产品，主要是给程控交换机系统，精密传输设备和移动通信控制系统提供24V或48V或更高的直流电源。

The problem of lighting and the idea of its improvement were discussed in detail in night fieldwork of the oil field operation team . The advantages of the vehicular explosion-proof lighting system with 24V low voltage were analyzed and its application was forecasted .

详细讨论了作业队夜间、作业现场在照明中存在的问题，改进思路，分析了24V低压车载防爆照明系统的研发优势，并对前景进行预测。