以太网卡

  • 网络Ethernet;ethernet card;ethernet nic
以太网卡以太网卡
  1. 例如,如果一个以太网卡坏了,可以被更换,而无须取得一个新的IP地址。

    For example , if a bad Ethernet card , and can be replaced without the need to obtain a new IP address .

  2. 对于该VIOServer,您必须至少分配一个存储控制器和一个以太网卡。

    For the VIO Server , you must allocate at least one storage controller and one Ethernet card .

  3. 采用硬件无关的设计方法,在Linux下实现了一个基于通用以太网卡的高性能集群通信库HPCL/Ethernet。

    A high performance communication library independent of hardware called HPCL / Ethernet is implemented based on commodity Ethernet NICs on the Linux .

  4. 它有一个10千兆以太网卡用于成员与CF之间的高速低延迟通信。

    It has a10 gigabit Ethernet card for high-speed , low-latency communication between members and CFs .

  5. 防火墙计算机要求2张以太网卡,一个对外部世界的接口和一个对主POP网络的接口

    The firewall machine will require two ethernet card , one Interface to the outside world and one to the master pop network

  6. 基于Veriloghdl描述的10M/100Mbps以太网卡设计模块的测试方案

    Testing Scheme about 10M / 100Mbps Ethernet Card Design Module Based on Verilog HDL Description

  7. 所以,它可以模拟一个完整的系统(内存、存储器、CPU、以太网卡、声卡,等等)。

    Therefore , it can emulate a complete system ( memory , storage , CPU , Ethernet cart , sound card , and so on ) .

  8. 以太网卡控制器与ARM7的接口设计及编程

    Ethernet Controller and ARM7 Interface Design and Programming

  9. 基于CPCI总线10/100Mb/s以太网卡的设计与实现

    Design and Implement of 10 / 100Mb / s Network Card Based on CPCI

  10. 如果系统上有两个LPAR,您就至少需要两个以太网卡和两个磁盘控制器。

    If you have two LPARs on a system , you would need at least two Ethernet cards and two disk controllers .

  11. 同时还介绍了10M以太网卡(RTL8019AS控制器)、嵌入式Modem模块设备驱动程序编写;

    Meanwhile , it deals with the programming of 10M Ethernet ( RTL8019AS controller ) and device driver of embedded Modem module .

  12. 电表数据集中器的硬件系统是通过单片机来控制以太网卡,进行传输数据,加载TCP/IP协议连接到电网监控网络的。

    In the hardware system of electric energy meter data collector , general microprocessor exchanges data or instructions with electric energy transportation monitoring and controlling system by means of the Internet card and TCP / IP protocol .

  13. 本文简单介绍了IPSec技术,详细分析了以太网卡功能及硬件结构,提出了IPSec的改进方案。

    It introduces the IPSec technology briefly , analyzes the function and hardware structure of the network card deeply , and then gives an improvement of the IPSec technology .

  14. 容易获得的廉价硬件(处理器、内存、硬盘、以太网卡等),再加上开放源代码软件,这些都促使人们采用基于Linux的Beowulf集群。

    The easy availability of inexpensive hardware ( processors , memory , hard disks , Ethernet cards ) combined with open source software quickly drove people to adopt Linux-based Beowulf Clusters .

  15. 要通过网络引导eServerp5服务器并安装EnterpriseLinux,eServerp5服务器必须有以太网卡并支持从这个以太网卡进行引导。

    To boot the eServer p5 server and install Enterprise Linux from network , the eServer p5 server must have an Ethernet card and support booting from this Ethernet card .

  16. ThinkPad有一个内置的以太网接口,我们又给它加了一块PCMCIA以太网卡,使之可以完成路由器的功能。

    The ThinkPad has a built-in Ethernet port , and we added another Ethernet PCMCIA card so it could act as a router .

  17. 使用LinuxConf来配置以太网卡

    Using LinuxConf to configure your Ethernet card

  18. 在研究IEC61850的基础上,给出了一种基于FPGA、DSP以及嵌入式以太网卡的合并单元的设计方案,解决了将电子式互感器应用于变电站自动化系统所面临的接口问题。

    The paper also gives a design of Merging Unit ( MU ) based on FPGA / DSP and Embeded Ethernet Card , which solves the interface problem of applying electronic instrument transformers to substation automation system .

  19. 该文在高速互联网系统所提供的MP(消息传递)机制基础上,提出并实现了以太网卡驱动程序的地址解析协议ARPSERVER机制。

    On the basis of MP ( Message Passing ) mechanism provided by Hi-speed internetwork . ARP ( Address Resolution Protocol ) Server system in a ethernet device driver is introduced and implemented in this paper .

  20. 以开发USB接口的无线以太网卡驱动程序为例,讨论了Windows2000下WDM/NDIS型驱动程序实现过程中使用的各种技术和技巧。

    Different kinds of technologies and skills , which are handled in developing the WDM / NDIS driver under Windows 2000 , are explained from an example of implementing the driver of an Wireless Ethernet card with USB interface .

  21. 用于快速以太网卡芯片的125MHz数模混合自适应均衡器

    125 MHz Mixed-Signal Adaptive Equalizer for Fast Ethernet Applications

  22. 介绍了以太网卡的广播、多播和混杂工作模式和Sniffer的基本原理,阐述了利用混杂工作模式进行网络中数据的收集,并结合TCP/IP协议在Linux系统中实现网络嗅探器(Sniffer)的具体方法。

    The Broadcast , multicast and promiscuous mode in ethernet network and the principle of Sniffers are introduced , the data collecting technique in ethernet network promiscuous mode are expatiated , and the realization method of Sniffers with TCP / IP in Linux system are listed .

  23. OPC服务器的开发首先借助于微软的MFC和ATL3.0建立统一开发平台,然后针对以太网卡开发I/ODLL,实现了基于以太网的OPC服务器。

    Manage them , and maintain data . With the help of Microsoft , the development of OPC Server is focus on building a uniform developing platform first , then I / O DLL based Ethernet card is developed . The OPC Server based on Ethernet is realized .

  24. 通常是以太网卡和点到点设备,以及猫的接口。

    Most commonly Ethernet cards and ppp , the modem interface .

  25. 保密以太网卡密钥协商协议的研究

    Research on Key Agreement Protocol of Secure Ether Network Card

  26. 你必须装一个新的以太网卡。

    You 'll have to install a new Ethernet card .

  27. 千兆以太网卡芯片数模转换电路的设计与实现

    Design and implementation of DAC circuit for gigabit ethernet chips

  28. 提出了一种快速以太网卡芯片自适应均衡器的体系结构。

    This thesis presents a adaptive equalizer architecture for fast Ethernet applications .

  29. 基于通用以太网卡的高性能通信库设计实现

    Design and implementation high performance communication library based on commodity Ethernet NICs

  30. 快速以太网卡数模混合自适应均衡器

    Design and implementation of mixed-signal adaptive equalizer in fast ethernet NIC integrated circuit