凸轮轴磨床

  • 网络camshaft grinding machine
凸轮轴磨床凸轮轴磨床
  1. 智能凸轮轴磨床控制软件编制和加工试验研究

    Development of Intelligent CNC Camshaft Grinding Machine Control Software and Research on the Camshaft Grinding Experiments

  2. 本文对基于开放式数控系统的全数控凸轮轴磨床软件系统进行了研究与设计。

    This thesis presents the research and design of the software system of the open CNC based Camshaft grinding machine .

  3. 多磨头高效率高精度CNC凸轮轴磨床

    Efficiency and High Accuracy CNC Cam Shaft Grinding Macthine With multi-grinders

  4. 基于PC的无靠模数控凸轮轴磨床

    Modern CNC camshaft grinder controlled by PC

  5. PC控制的现代数控凸轮轴磨床设计方法

    Design of PC Controlled CNC Camshaft Grinder

  6. 基于MATLAB的凸轮轴磨床的模糊控制仿真的实现

    The implementation for the design fuzzy control system of NC cam-shaft grinder based on MATLAB

  7. 基于BP的NC凸轮轴磨床磨削参数优化软件设计

    The software development of grinding parameter optimization model for NC camshaft grinder based on BP

  8. 西门子OEM软件在数控凸轮轴磨床上的开发与应用

    Exploitation of Siemens OEM Software in CNC Camshaft Grinder

  9. 本文较详细地分析了国内外CNC凸轮轴磨床的现状和发展趋势,并在此基础上提出了一种具有新的结构形式的CNC凸轮轴磨床。

    In this Paper , a new type of CNC earn shaft grinding machine ( CCSGM ) is Presented ther the situation and development tendency of the CCSGM in the world are analyzed .

  10. 基于840D数控凸轮轴磨床数据处理软件开发

    The Development of The Data Processing Software for NC Cam Grinding Machine Based on 840D

  11. 凸轮轴磨床数控系统的研制

    Development of a CNC System for Cam Shaft Grinding Machine

  12. S型凸轮轴磨床磨削特性的分析

    Analyzing the grinding characteristics of camshaft grinding machine model S

  13. 凸轮轴磨床靠模样板磨削过程若干问题的探讨

    The Discussion of Some Questions in Direct Copy Cam Grinder Grinding Process

  14. 凸轮轴磨床凸轮靠模互换的分析与计算

    Analysis and calculation of cam templates interchangeability in camshaft grinder

  15. 高精度数控凸轮轴磨床控制系统设计

    The Design of High-precision Numerical Control Grinder for Camshaft

  16. 高速凸轮轴磨床垫板的结构分析与改进

    Structural Analysis and Improvement of the Base Plate in High Speed Camshaft Grinder

  17. 数控凸轮轴磨床加工过程的智能控制

    Intelligence control in manufacturing of NC camshaft grinding machine

  18. 单片样板数控凸轮轴磨床的开发与应用

    Development and application of a single cam template numerical control grinder for camshaft

  19. 摇架式凸轮轴磨床凸轮轮廓数控成形分析

    Analysis on Cam Profiling by CNC Swing-type Camshaft Grinder

  20. 在普通凸轮轴磨床上提高加工凸轮形面精度

    Improving Cam Profile Accuracy on General Camshaft Grinder

  21. 数控凸轮轴磨床加工中的一些仿真技术

    Simulation Technology in Machining CNC Cam Grinding Machine

  22. 数控凸轮轴磨床磨削参数智能化选择模型研究

    Study on the Intelligent Grinding Parameter Selecting Model for A CNC Camshaft Grinding Machine

  23. 全数控凸轮轴磨床研究

    Research of Numerical Control Grinder for Camshaft

  24. 详细分析了摇架式凸轮轴磨床凸轮轮廓的数控成形原理。

    In this paper , the theory of cam profiling by CNC swing type camshaft grinder is analyzed .

  25. 以某型高速凸轮轴磨床砂轮架为研究对象,运用模态分析理论对砂轮架的固有频率和振型进行分析。

    For the grinding carriage of a camshaft grinder at high speed , mode analysis theory is used to analyze its natural frequency and mode shape .

  26. 阐述了普通凸轮轴磨床提高加工凸轮形面精度的方法,介绍了凸轮靠模的制作及凸轮磨床使用中应注意的几个技术问题。

    This article expounds how to improve the profile accuracy of earn on general camshaft grinder , introduces the technological problems in earn template making and the grinder working .

  27. 我国全自动数控凸轮轴磨床加工的凸轮轴精度往往达不到要求,故凸轮轴的加工主要依靠进口设备,但进口设备售价相当昂贵。

    Machining precision of camshaft with domestic automated NC camshaft grinding machine is far from satisfaction , so imported equipments are applied to the manufacture of camshafts , but it leads to a high cost .

  28. 在以机械仿形原理为基础的凸轮轴磨床上进行凸轮磨削或用反靠制造靠模凸轮时,存在着有关确定靠模凸轮基圆半径大小及精度方面的问题。

    There are some problems on precision and the determination of the radius of copying cam base circle when grinding cam or manufacturing copying cam with the method of back copying based upon the principle of mechanical copy in cam shaft grinding machine .

  29. 从理论上分析了凸轮轴仿形磨床由于砂轮磨损所造成的凸轮升程误差,并结合凸轮的升程方程对升程误差进行了实例计算。

    This paper analyses theoretically the effect of grinding wheel wear on cam replacement error in a cam shaft grinding machine , and calculates the error by the cam replacement equaion corresponding to a practical example .

  30. 介绍凸轮轮廓磨削加工的数学模型及研制的数控凸轮轴磨床的机械结构,进行加工实验并讨论凸轮轴磨削的工艺参数。

    Describes the math model of grinding camshaft , the mechanical structure of the CNC camshaft grinding machine ourselves and the experiment , then discusses the machining technics .