出油阀

  • 网络delivery valve;outlet valve;Oil Outlet Valve
出油阀出油阀
  1. 出油阀弹簧刚度及开启压力对柴油机喷油系统中汽泡影响的研究

    Effects of Delivery Valve Spring Rigidity and Opening Pressure on Bubbles in Diesel Fuel Injection System

  2. 柴油机柱塞、出油阀和喷油嘴这三对偶件的磨损直接影响到柴油机的供油规律。

    The wear of diesel engine fuel pump plunger , delivery valve andfuel injector has direct effect on the fuel supply law .

  3. 通过增大出油阀卸载容积的办法,可以消除LPG的二次喷射等异常喷射现象。

    The secondary injection phenomena are observed for LPG fuel injection and those can be controlled by increasing the relief volume of the delivery valve .

  4. 燃油喷射系统等压出油阀偶件可靠性研究

    Reliability Study of Constant Pressure Delivery Valve in Fuel Injection System

  5. 许多出油阀在改善喷油特性上具有独特的效果。

    Many delivery valves have good result in improving fuel injection .

  6. 采用可编程序控制器改造出油阀铣床电气控制系统

    Reconstruction of Electric Control System of Delivery Valves Miller With Programmable Controller

  7. 不同出油阀对VE泵速度特性影响的研究

    Study on Influence of Several Delivery Valves on VE Pump Speed Characteristic

  8. 等压出油阀偶件结构与性能参数试验研究

    Experimental Study on Constant Pressure Delivery Valve with Structure and Parameter Analysis

  9. 柴油机不同类型出油阀喷油特性的模拟与比较

    Fuel Injection simulation and Comparison Of Different Fuel Delivery Valves for Diesel Engines

  10. 柴油机装有缓冲式出油阀的燃油喷射系统研究

    An Investigation on the Diesel Engine Fuel Injection System with Dashpot Delivery Valve

  11. 高压油泵出油阀紧座断裂失效分析

    Failure Analysis of Injection Valve Nut of Diesel Engine High Pressure Oil Pump

  12. 不同出油阀对喷油规律影响的试验分析

    The Testing Analysis About Effect of Several Fuel Delivery Valves on Fuel Injection Law

  13. 出油阀偶件密封性与高压油管压力波分析

    Analysis of Sealing Property of Outlet Valve Couple Parts and Pressure of High-Pressure Pipe

  14. 出油阀在喷油过程中,担负着重要的任务,对控制高压系统的残余压力、喷油时刻、喷油规律、速度特性等起着关键作用。

    Oil outlet value plays an important role in the process of spraying oil .

  15. 出油阀及紧帽腔对柴油机喷油系统中汽泡的影响

    Influence of Delivery Valve and Delivery Valve Holder on Bubbles in Diesel Fuel Injection System

  16. 喷油泵出油阀开启压力对供油特性的影响

    The Affect of Pumping Element Delivery Valve 's Open Pressure on the Fuel Delivery Characteristic

  17. 等压出油阀的应用研究

    Application Research on the Constant Pressure Valve

  18. 出油阀结构对喷油泵喷射特性影响的试验研究

    Study on effect of fuel delivery valve structure on the characteristics of fuel injection pump

  19. 阻尼出油阀柴油机喷油系统液力过程的计算与分析

    Calculation and Analysis on Hydraulic Process of Diesel Fuel Injection System with Damping Delivery Valve

  20. 应经常查看出油阀的通畅情况,发现不良情况及时处理。

    Should always Show filling valve patency , the timely processing of that bad situation .

  21. 出油阀腔容积对JC375柴油机性能影响的研究

    A Study on Effects of Fuel Delivery Valve 's Volume on JC 375 Diesel Engine Performance

  22. 应及时更换已磨损的柱塞及出油阀偶件。

    Should be the timely replacement of worn and out of the plunger valve coupled parts .

  23. 出油阀结构参数对小型柴油机喷油量影响的研究

    Influences of Structural Parameters of Delivery Valve on Fuel Injection Delivery of a Small Diesel Engine

  24. 加速器泵出油阀钢球

    Accelerator pump outlet valve ball

  25. 装有缓冲式出油阀的柴油机喷油泵的数理模型和计算方法的研究

    Research on the Mathematical Model and Calculating Method for the Fuel InJection Pump with Dash Pot Delivery Valve

  26. 出油阀的下部呈十字断面,既能导向,又能通过柴油。

    Valve cross-section of the lower part was not only driven , but also the adoption of diesel .

  27. 亚新科天纬的出口产品包括:喷油泵、喷油器、喷油嘴、柱塞、出油阀、汽车零部件加工类。

    ASIMCO Tianwei exports diesel pumps , injectors , nozzles , plungers and valves , auto part machining .

  28. 带不同出油阀结构的双弹簧喷油器燃油系统喷射特性研究

    Research on the Fuel Injection Characteristics of the Fuel Injection System with Two-spring Injector Using Different Delivery Valves for Diesel Engines

  29. 在油泵出油阀端,采取渐缩管结构措施,利用管路动态效应提高喷油压力;

    The construction of conical nozzle is used by pump 's delivery-valve , making use of the dynamic characteristics of conventional .

  30. 结果表明,高压油管压力波能够反映出油阀密封性不良带来的影响。

    It is shown that pressure wave in high-pressure pipes can reflect the influence of bad sealing property of the outlet valve .